 | | | Red Hat Linux 9 | | I am trying to install Linux Red Hat 9 on a IBM APTIVA which as a AMD-K6-2
processor 333 MHz processor speed and 64MB of memory. When I get to the
point in the installation where Linux is formattI see Mac has 64 bit pci slots as well as 128 bit pci...
Any chance that someone will hack the Apple/Mac 64 bit pci cards to
work in a PC.
Stupid question but I don 't know anything about Mac cards I am trying to get my RH9 box set up as a print server for my WinXP and
Win2K machines. I can see the printer from both (I am able to add new
printers) but I cannot print to either service. Any advA local store has this printer on clearance and only three in stock.
The driver is listed in RH9. It has both USB and parallel cables.
Is anyone familiar with this printer? Good or bad? It has 4I have a server with 64 bit pci slots. Are there any soundcards out
there that will work in a 64 bit pci slot. Note I am not refering to
a 64 bit soundcard but the new 64 bit pci slots in this supDo any of the cheap Maddog soundcards work with Linux? I see a 4 and
6 channel pci sound cards at Office Max.
jay
--
Sometimes I feel like a rat in a cage...
Been trying today to share files between my Shrike desktop & Shrike
notebook and for the notebook to share the modem on the desktop.
I have a live connection per Traceroute but when I activate NetwCan someone point in in a direction to get the an Audigy soundcard to work
in RH 9.0? Is installing ALSA the best answer? Is there an rpm to do this?
Is the 2.6 kernel available yet and might that helHi All
Every time I use startx to bring up XFree86 it reverts back to the default
keyboard.
I have to open system settings keyboard and select the keyboard I use
(dvorak).
If I log out of XFreOn Fri Dec 19 2003 at 05 36 33PM -0700 Craig White wrote
> On Fri 2003-12-19 at 11 31 Aaron Konstam wrote
> > On Fri Dec 19 2003 at 10 32 24AM -0700 Craig White wrote
> > > On Fri 2003-12-Hi folks
I am looking for an economical printer for printing documents. The
printer shall work on RH9 OS. Some shops recommend HP Deskjet 3550 with
USB plug.
Any folk has experience on the abovemenHi all
I have been using kernel 2.6 from arjan rpms site sice 2.6-test4 and
they work great! thanks arjan.
Up to kernel 2.6 test7 sound was working ok with no errors. Some time
later I updatedRecently I learned that I don 't have to live with the file system that red
hat recommends (ext3) and that FC1 and even 9 down to I believe 7.3 had the
option to begin with 'linux reiserfs ' or 'linux Hi all!
I set up a server that provides /home for all users (mounted via nfs)
and an ldap-server for authentication.
Both together provides "roaming profiles " and works fine except of one
detail
How about using a non-login shell for the accounts you don 't want people
logging in with?
The most popular one to use is /bin/false
I have a quick question. I 'm a solaris admin that is now doing redWe have 40+ machines that are NIS clients of one server. All the machines
share a user filesyste. nfs mounted on each client. We want to prevent all
but a select few to be able to login to the server.I have gotten as far as pppd recognizing the internal notebook
(powernotebooks.com model C 3 16) 82801DB Agere AC '97 winmodem but it
gets stuck trying to initialize it.
Settings are /dev/ttyS0 FHi All
Just upgraded apache to 2.0.40-11-9 and when I restarted it..
I had this in the logs
[Fri Dec 19 16 16 07 2003] [crit] (17)File exists unable to create
scoreboard (name-based shared memorHi again everyone. Here is the new problem I 'm facing.
I 'm converting my domain from win2k over to linux. Everything is
working great finally got it all syncing up but on my machine I get
this eacHi there
I am trying to get a screensaver working. Under KDE if I set the screensaver
using the control center nothing happens. That is the screensaver appears to
be set but nothing ever hap > -----Original Message-----
> From shrike-list-admin@(protected)
> [mailto shrike-list-admin@(protected)] On Behalf Of Ben Yau
> Sent Thursday December 18 2003 1 44 PM
> To shrike-list@(protected)Is there a log for either dns or dhcp on the system that will tell me
which ip addresses have been leased to which machines by host name?
--
regards
shane
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN " >
<HTML > <HEAD >
<META content "text/html charset iso-8859-1 " http-equiv Content-Type >
<META content "MSHTML 5.00.3315.2870 " name GENERATOWhat changes do I need to make to my RHL 9 system to successfully run the
shiney-new v2.6.0 kernel?
I recall that an updated modutils is needed. Anything else?
Thanks.
This is probably really simple for u guys.. I need a one liner to
basically do the same as explode in php. Here is the input to the
command
Oneliner | grep 'whatever ' *
What will be actually being How do I secure the X server on a gateway/router box using iptables?
$nmap localhost shows...
6000/tcp open X11
My current iptables seem to block lower ports but what about
applications like >From the Linux Journal archive cd
On Linux the simplest way to make an image is with cat. Put the
desired CD-ROM disk into the CD-ROM drive. Make sure the directory
/mnt/images/ exists. If your CD-Hi everyone. I 'm running mailscanner and spamassassin. I have a
question I don 't want individual user config files and when I run
the command below sa-learn creates .spamassassin in my home
directoHellow ppl
Desperately looking for someone who has got their hads dirty with mrouted
3.9 beta
on RH 9 ?
I have set up mrouted on two subnets
Overview of my network.
Hardware Layer 3 Switch wiHi All
I use SSH for remote logins to my server(only I(1 person) have
access). However I tend to login from a variety of places. hence when I do
a "last | less " I can see either the IP address or |
|
|
