 | | | Red Hat Linux 9 | | I run spambayes. Since I 've installed bash-2.05b-25 the scripts won 't run
implicitly.
[root@(protected) bin]# ls -l /usr/bin/pop3proxy.py
-rwxr-xr-x 1 root root 28967 Jun 28 14 22
/usr/bThanks for the reply. This is from the rawhide rpm so all the modules are
there ( or should be!).Did as you sugggested ( I 'm not using ftp or irc).
Here 's what I get from lsmod
iptable_mangle Network setup
eth0 connected to DSL eth1 set to 192.168.100.1 and
configured with DHCPD
2 Windows computers (Win2k WinXP).
The windows computers are seeing the network fine and
can see the linux just for the sake of living on the edge anyone out there
playing with either of reiser4 or devfs? particularly with the
latest 2.5 kernel?
comments?
rday
I have enabled banned_emails in vsftpd. I am trying to find a global setting
to ban a range of email addresses such as
[A-Z]gpuser@(protected) or *gpuser@(protected) or even @(protected)
However none of tHi Everyone
I 've got a strange problem which I can 't for the life of me find out why so
I was hoping a fresh set of eyes might throw some light on it.
I have a procmail script which forwards on any Does anyone here know if `fam ' can be called/used in a script?
If so any examples of how this might be done?
I wanted to see how to use it to watch a specified directory for
changes inside.
Good Morning
I 'm trying to get my UPS to work with my Linux box. I 'm running Red Hat 9.0
with all of the latest updates. I have an APC SmartUPS 1000XL and I believe
that it is being seen correctly
I will be out of the office starting June 28 2003 and will not return
until July 7 2003.
I am out of the office from 06/30/03 returning 07/07/03. You will receive
only this notification of my Just posting again as I got no response to this. Hoping someone can help.
***********************************************
I 'm very new to understanding USB on Linux. I just bought a SmartUPS VA
1000Firebird (Mozilla) RPM packages for Shrike anyone?
On the Firebird website i only see a tarball and the main RPM
repositories don 't seem to carry a package yet.
--
Florin Andrei
"Never send a humSeems I didn 't tell the truth about my logs!
I found the following.
What is the hotplugin/net.agent? I looked at it and it
looks like a script.
Is this what you were referring to restarting?
(rp-pppHi Gentlemen
I 'm about to buy a new printer for my actual RedHat 7.3 which could
furthermore comply with RedHat 9 once I 've installed it.
By so far I need to get some links to web sites whichttp //uptime.netcraft.com/up/graph/?host sco.com
--
Jorge Bosc??n Etura <joretur@(protected) >
Universidad Ferm??n Toro
hi friends
My friend and myself are trying to configure a LAN and
internet Connection
We have 2 machines one Mandrake 9.1 and other Red Hat
9. The Mandrake Machine is connected to internet via a
I don 't have much experience with source rpms or rpms in general. I downloaded
the src rpm package for the kernel but I can 't seem to figure out how to work
with it. The Red Hat site mentioned using Hi
I am using the MGE UPS Systems UmClient to automatically shutdown linux
when the power fails. However when i try to run the client umc i get the
following error
Cannot initialize communicatioI know this topic has been covered in the past. I have
read web page after web page regarding fuzzy fonts
and am still in the dark. Seems everyone has a
different opinion and solution.
I have instaHi
This morning my internet DSL connection appeared
dead. I restarted the network and anything else that
would use any part of the network including dhcp.
That didn 't help. I checked the logs founI have a small network with 3 PC 's
Contec (Linux Redhat 9 192.168.0.1)
PentiumHp (Window98SE 192.168.0.3)
Celeron (Windows XP Home 192.168.0.2)
My workgroup is Workgroup.
If I digit from the LHi.
Sometimes appears in the console the message
(scsi0 A 1 0) Locking max tag count at 64
I use RedHat 9 in a dual machine Pentium III 1000 GHz with kernel
2.4.20-18.9smp. Also I have three I 'm trying to run a simple iptables nat script on the kernel from rawhide
/sbin/iptables -t nat -F
/sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
but I get this erNo one at psyche-list could solve this problem so I throw it to you
guys )
In short
I add some routes with either redhat-config-network or route add or
both (can 't quite remember)
Later I no When I try to compile sixfour I get the following
errors
make[1] Entering directory
`/home/andrew/.ht/sixfour/PeerLayer/TP '
g++ -Wall -I.. -I../../LinkLayer -I../../aes -DLINUX
-O2 -static -s -DUSEhi all
i ve changed atapi-dvd rom to ide-scsi driver
(for faster ripping with grip)
it works only under root account.
(i have a scsi-scanner that works for all users under /dev/sda
but this dvdrom faHi all
How do I go about getting IceWM in the session chooser at the graphical
login screen? I edited /etc/x11/xdm/xsession made an IceWM file in
/etc/x11/gdm and made a xclient file in /usr/share/Rich
Yes that fixed it! Thank you!
I 'm posting your advice on the lists so someone else can benefit.
Kevin
rhfreeman@(protected) wrote
>I can 't reply to the list but anyway!
>
>Alter your booI 'm looking for a notebook recommendation to run Red Hat 9.
The ideal
Modern notebook Radeon 7500 or better.
Prefer 15.4 - 16 " screen.
Gig RAM.
P4 2 gigahertz or better
Firewire
USB 2.0
ie. A workI 'm setting up a new firewall system based on Red Hat 9 and wanted to know
how one would configure Sendmail to pass all emails through Spam Assassin
before relaying them. It 's been mentioned to me thWhen I click on the Gnome Terminal Icon on my panel
I get the following error
Cannot launch icon
Details Failed to execute child process
"/home/rebel/gnome-terminal " (No such file or
directory)
|
|
|
