 | | | Red Hat Linux 7.3 | | Hi all
While I am using iptables command I got the following
error
Hi all
I am still experiencing a problem with the monitor. Below is again a
description of the problem as formerly posted. Any help is greatly
appreciated.
Thanks
Marco
msg #1HI Mike
Thank You Thank You Thank You.
I now have the 3 Red Hat 9 CDROMS that have
the many RPMs instead of one gigantic 650MB ISO file.
All it took was using the CD burner software corI downloaded Red Hat Linux 9 a few days ago from ftp.utulsa.edu site. It consisted of six CD 's (1-3 iso & 4-6 rpms). I noticed on the Red Hat Linux site there is only three CD 's to download. Why is thI 'm looking into getting an ethernet card for my Inspiron 5000e laptop
running RH 7.3. Does anyone have recommendations for cards that they have
had good experiences with (or warnings about ones thGood Question BH.
I am using "Easy CD Creator 5 Basic " and selected
ieee9960 data format for the cdrom "disk " burn. I 'm
not too happy with this software. If anybody knows
of an excellent replacemenHI Folks
I didn 't mean to turn a Red Hat forum into a backup
forum as important as backups are. I was touched by the
concern for the backup strategies that were offered and
debated. I thinkHI Julia
That is very interesting. I didn 't know
how anti-spamming software worked. Quite
interesting on their evaluation scheme.
I 've got a new problem now. I didn 't sleep Friday
nI have a problem and was wondering if anyone on this list had encountered
a similar problem and if so how it was done. I 've been lurking on this
list for many many months so I know that there are a > Hey all
>
> I 've been quizzing over this for a few hours and can 't make it work. I
> have 2 almost identical 7.3 machines all updated. I want to be able to
> login to machine B from machine A witHey all
I 've been quizzing over this for a few hours and can 't make it work. I
have 2 almost identical 7.3 machines all updated. I want to be able to
login to machine B from machine A without a paIt 's my first installing Postfix.
Which version do I need to use for Valhalla? And where is a god spot to find
that RPM?
I 've seen tons of different versions and downloaded the source code for
postfHI Samuel
Thank you very much for your advice.
You are correct about the IDE channel
Master/Slave problem. I have both of my
IDE drives set as Masters through the
Promise RAID card and they attach phil > Should I replace my Linksys NH108 hub with the Netgear or
phil > Linksys firewall router? Or should I place the firewall router
phil > uplink from the NH108 hub and downlink from the cable HI Folks
I just talked to the Promise Technologies
people and they informed me that they are
starting work on a new driver for the current
boxed set of Red Hat 9.0. It may take a month
but HI Maxwell
Your solution seems to be an excellent one but
It is far beyond my capabilities. I wouldn 't know how
to remove the RAID drivers and turn it into a dumb
ATA card. Wouldn 't such a HI Megan
I wouldn 't even know where to begin the first
step to making my own Kernel version to satisfy the
Promise RAID drivers although I am completely familiar
with the concept. That 's whI sent this email yesterday and have no responses
I am running a RedHat 7.x server with Wu-FTPD 2.6.2-5. When I start the
server FTP runs very quickly for hours. After a while logging into the
serv Hi
I am working with Tomcat and going to a jsp page give me the following
error
Xlib connection to " 0.0 " refused by server
Xlib No protocol specified
Looking in forums the solution is x???? wrote
>valhalla-list????????
>
> hello??Can anyone tell me "reahat professional " difference from "redaht AS "?
>
http //www.redhat.com/software/rhel/as/
basically....better high end features
HI Folks
I have just learned from Promise Technologies that
my RAID 1 (mirror) card will only work with Red Hat
7.3 (kernel 2.4.18-3) or 8.0 (kernel 2.4.18-14). How
can I tell what version oGreetings fellow list members....
I have a Compaq TSL-9000 Autoloader that I 'm trying to get to work with
RH7.3 with a 2.4.19 kernel. We 've done some research and found this to
actually be a Sony
Im trying to get fvwm 2.4.8(shareware window manager) running on my rh 7.3
machine and I am getting the following errors
/Server/setup/fvwm2_linux/mods/FvwmBanner /Server/setup/fvwm2_linux/mods/Fv
I am running Red Hat 7.3. I built a new kernel from /usr/src/linux-2.4
source tree based on the kernel HOWTO. Then built the initrd copied the
kernel initrd file and the config file in boot locatioI am running a RedHat 7.x server with Wu-FTPD 2.6.2-5. When I start the
server FTP runs very quickly for hours. After a while logging into the
server slows down. After login file transfers work fine.I running Red Hat 7.3 in a IBM Netfinity 5600R and from two weeks ago to
today the server is getting frozen I can 't login(ssh webmin etc) but
the ports were enabled and you can do a ping to the serAlready did a strings search and grep on everything under the rootdir
avoiding /proc. (Doing "find | grep " on /proc resulted in a recursion
that I had to stop manually after it was noticed about 14Hi all
Have anyone been using some Free Software anti-virus solution for
GNU/Linux (specially for RedHat)????
Can anyone send me some information about it?
I want to integrate a anti-virus scanneHello to all I have a question concerning what Red Hat program is the best for me to learn. I am in my third year in school for a BS in Computer Science degree. One of my Professors stated that it wo |
|
|
