 | | | Red Hat Linux 7.3 | | hello every body
I am having problem with printing an open office document on a
DMP. Can I print Open office documents on a DMP. Any solution
regarding this problem is appreciated.
Thanks in AdvancHello
Thank you. I could not find information for Satellite Pro 4200. I used the documentation available for the 4300 series and it works. It is only a problem with X configuration. I added the optHI FOLKS
Thanks to the tremendous help that I got from the folks
on the Valhalalla / NOVALUG / and DCLUG mailing lists I
was able to finally load Red Hat 9 onto my system when I got
the proHi everybody
Before I take the plunge I would like to hear of success/failure
stories and other accounts of *upgrades* from RH7.{2 3} directly to
RH9. What problems have you encountered if any whwill a PCI digiboard XEM series serial expnasion card work with redhat 8
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN " >
<HTML > <HEAD >
<META http-equiv Content-Type content "text/html -----BEGIN PGP SIGNED MESSAGE-----
Hash SHA1
Good advice - that was where I found how to get RH 7.2 running on a 4200
series. I 'm sure it 's the same issue with 7.3 namely a tweak to the X
configuHello all
I am begining to think of not. I could install the system and modify XF86config to avoid the white square that was the mouse 's arrow. But the X system or GNome is not working properly. I have finally got my firewall script to work properly with eth0
(192.168.1.x internal lan) eth1(cable modem) ppp0(dialin1)
ppp1(dialin2). thanks to all who helped me special mention to jdow.
just 2Hey
Does anyone know of any developments on a driver for the TI ACX100
chipset? I have a dlink dwl 650+ wireless card and I can 't find a linux
driver for it. I 've read that dlink is supposed to bHello
I remember seeing a message some months ago about this very problem but
can 't find it anymore. I have a Cisco Aironet 350 wireless card. When I
plug it in it immediately splatters "airo goBrian T. Brunner wrote
>
> Dear RedHat and/or Linux Fans
>
> I mentioned to a redhat engineer that I run 2.4.18-3 from RedHat 7.3
> and that I have downloaded and built 2.4.20.
>
> I got a reply Hey All
I wrote the list a little while ago with a question about binding a range of IP
addresses that were all in the same subnet and then binding a single IP
address with a different subnet thI want to write DVD format using my RH7.3 system. I know there are a
lot of DVD formats out there (DVD-RAM DVD-RW DVD-R DVD+RW etc.) so
I will settle for the ability to write most any format Hi All
I have some Epson dot-matrix-printer (impact printer) connected to my RH.
Printing only text.
For some reasons I need to condense it when printing some reports.
I use lpr to print. Is there aHello All
What 's a good way to capture the received side of a
web browsing session and replay it to the browser
when offline a screen at a time?
I 've seen some testing tools which almost do this bAlex Greg wrote
>Sorry I made a mistake here. The XF86Config file may be one of
>/etc/XF86Config
>/etc/X11/XF86Config
>/etc/X11/XF86Config-4
>The option is inside the Section for your video cardUsers are working with notebooks (XP and Word and Excel) and share there
files on an ftp server (RH73) on internet.
They want quicker acces and want to work as where they on a file server.
Samba on dear all
i finally able to get my serial modem to work but i see the speed of
browsing and download is very low its speed is less 3 times than that
when i use same modem in xp o/s
my mHello all
I activated my Motorola T260 gprs mobile phone to work with my linux-box acting
as the default Modem.
By the way I cannot use RH Dialer since (may be) something is different on the
internaHello all
I had been using redhat 7.3 with 2.4.19 without any problems. I have three
drives configured in RAID0 configuration /dev/hdf1 (40G) /dev/hdg1 (40G)
/dev/hdh1 (30G). As you can see theDear All
When I update RedHat 7.x kernel 2.4.20-13.7 ?Athen quota can 't work !
The error message
quotaon using /home/quota.user on /dev/sda2 Invalid argument
How to do ?
<html > <div style 'background-color ' > <DIV > </DIV >
<P > Hello Everybody </P >
<P > I have installed RH linux 8 on my desktop. But I cHello to All
I want to Install RedHat 7.3 on Compute with
AMD K6 (tm) 2/500 cup. I have checked on HCL list. It
shows AMD K6 processors are compatible.
While Installing I got error.
EXT2-fs unaSeems to be a problem with Keyspan USA-19Qi & USA-19Qw
modules consistently failing.
I have two Keyspan modules on the same hub. When they were
first installed both setup OK and worked. SubsequentlyHow do you change the order of what gets selected as the automatic boot
partition in GRUB? For example I have a laptop with Redhat 9 and WindowsXP.
Right now the GRUB loader if not interrupted will aHi i just want to know how can i configure a virtual IP address on mi ethernet cards.
Is it possible?
Can i have Ip addresses from diffrerent networks on the same card. (ie. 10.2.2.x and 192.168.32x)I 'm trying to diagnose a problem with slow NFS performance (and unhappy
users ) especially during write operations to the NFS mounted
filesytems.
I 'm running a PE 2650 (2 x 2.4GHz with 6GB RAM P[posting anew to xfree86-list as a reply to ongoing valhalla-list thread]
Hi
I 'm trying to install XFree86 4.3.0 on RHL 7.3. The rawhide RPMs are
built for post 7.3 so I 'm working on the src.rpm. AHey
I 'm trying to install redhat 7.3 on a Dell inspiron with the factory set
up (xp ntfs). In the past I 've just formated hard drives to install
linux but I really can 't do that this time. I donI just got a SSL certificate from Thwate and I 'm trying to get it working on
the server. I generated the two key files using the following commands
openssl genrsa -des3 -out www.virtualhost.com.key |
|
|
