 | | | Red Hat Linux 7.3 | | I have my server configured to where the only network device that activates
on boot is eth0. This morning I changed the name of my server and
rebooted. After that the eth0 interface is now no longAright here 's where the issue was
The ssh_config file ie. The client file had been modified on these two
machines in question. Turn them back to default settings and everything was
golden!!!
ThanHere is my verbose output from the session if this helps anyone. For me I
don 't understand why I would be getting no challenge??? Anyone have anything
like this before?
debug1 Found key in /home/tHi all
Seeing some strange behaviour on 3 different 7.3 servers. Each with fully
qualified hostnames and their sshd_configs are exactly identical.
The strangeness is as follows - I can connect frDear All
I 'm trying to set-up virtual hosting on my server using Apache and I 'm
getting the following problems in my logs and also I have sent the apache
configuration file http.conf
Messages Log ReWhen the nfs server is down nfs volumes cannot be unmounted even when
forced with "-f ".
Error messages are "nfs server not responding " "NFS server busy " some
rpc errors etc.
System waits foreHi all
Just having a really hard time getting smtp auth to work in any way shape or
form on my 7.3 box. Here is what I have done
1.) tried to get it to run on the installed version with 7.3 whichHi To All
I would like to ask a question regarding the log messages. When I issued the command tail -f /var/log/messages on my linux RH 7.3 and RH7.2 box I get the details below
[root@(protected)]# tHello
I want to install joystick-1.2.15-11 version in RH 7.3
kernel version is 2.4.18-26.7.x. I have already tried
installing in 7.1 7.3 (original kernel version of
RH7.3) and RH 9.0. All works fiI am trying to set an icon on my desktop that brings up a certain
webpage in konqueror. I created the link on the desktop but it keeps
using mozilla instead. How does one set the default bowser to
Hi all
Does anybody use US Robotics 56K Faxmodem USB?
I am running RH 7.3 on kernel 2.4.20-20.7. I recompiled the kernel with usb support but it still does not work. Is there any driver for it?
ThHi
need users to be autentificate against /etc/passwd then against MySql then
I nedd to run /bin/bash if the autent. agains passwd file is correct or
chroot them into their homedir if the autent. <P >
hi everybody <BR >
I am harrased with this problem. No one has solution for this problem. I have a IBM x.225 server. which which is shoing some error. while working on text mode. If any one has anyHow do I only allow a user into a certain directory?
example
/usr/local/games/bf1942
If I only want them to have access to only this dir using VSFTPD. And
nothing else.
Thanks!
Hi everyone.
Is there a way to treat a tape drive (using ftape or ztape) as a regular
drive? I 've tried to mount it but get the error "not a block device ".
I normally use tar to do this but there Howdy I half-remember there being a way to somehow export ISO CD images as network shares of some sort. Ideally I 'd like to do it through Samba (for use on a couple WinXP boxes). Can anyone point "Brian T. Brunner " <brian.t.brunner@(protected) > wrote
> I want to upgrade the kernel of my 7.3 boxen to the last 2.4 kernel (the ke
> rnel shipped with RH9 will do but RH9 will not install on Dear All
I have just downloaded the Linux Distro from the Internet and my problems is
the installation has a problem reading the package rsh and this happens
when it has installed up to 99%.
My quesHi All
Is there any utility to manage DRAC II in RedHat Adv Server 2.1 ?? This is
for Dell Remote Access Card which is onboard on Dell poweredge 2650.
Thanks
Mahesh
----- This message is for the nJake McHenry said
[snip]
>
> Also what email client should I run to format these posts correctly? I
> can 't find any settings in outlook or outlook express to do it. It
> automatticaly starts at theI appologize if this ends up posted twice but think the first try
failed. I wanted to know if since the end of support for redhat 7.3 is
supposed to be 12/31/03 can we get the entire update packagAlle
Does anyone know where to find a howto on upgrading perl from the
installation default 5.6.1 to 5.8.X?
Best Regards
Camron
Camron W. Fox
Hilo Office
High Performance Computing Group
FujitsuI have everything set up and working but how can I set my resolv.conf so it searchs in both my private and public zones?
If I have resolv.conf set to search nittanytravel.com domain nittanytravel. <P >
Hi every body <BR >
My IBM x.225 server which have 4 36GB scsi hdd 1 Raid 4 lx card and 2 gigabit ethernet cards is giving error. here is the out put from dmesg command <BR >
#dmesg <BR >
retuI hope someone can help here. I have a RH7.3 box which was acting as
router for our network but having made some changes I cannot get it
to work now whatever I try. Does anyone have a list of step-byWhen you have a line like this
Received from foo.com (localhost.localdomain [127.0.0.1])
is it advantageous to remove your localhost entry from /etc/hosts to keep
this from happening? If not shouI 've got a Compaq (HP) DL380G2 running RH7.3 with an Adaptec2940 card in it
with an HP LTO tape drive. It was running the default kernel (2.4.18-3smp)
on it until recently. I 've always had problemsI RTFM both for the service-side sgi_fam /usr/bin/fam /etc/fam.conf and the application-side fam(3x).
I have sgi_fam enabled in /etc/xinetd.d/sgi_fam and restarted xinetd.d
I get a SIG_SEGV in Hi
I have a little problem. In the log/mailman/error I get the following
errors
Oct 07 08 13 01 2003 qrunner(1637) Traceback (innermost last)
Oct 07 08 13 01 2003 qrunner(1637) File "/var/maI 'm trying to get DCC running with MailScanner. My question on RH9 do I
have to recompile sendmail to add the Mail Filter API or Milter functions?
Or are they precompiled?
Thanks
Jake
|
|
|
