 | | | Red Hat Linux 7.3 | | I have apache 2.0 and the perl modules installed on a RedHat 9.0 box.
-----Original Message-----
From valhalla-list-admin@(protected) [mailto valhalla-list-admin@(protected)]
On Behalf Of valhalla-lisI am having the following problem while trying to configure my PCMCIA 3com
network card on Redhat 7.3
cs warning no high memory space available
followed by two beeps the first a bigger one the sAlle
I have recently installed 7.3 from the ISOs (kernel 2.4.18-3) with a
Promise SX6000 RAID card (the only drives in the box) using the driver from
promise (installed with "boot linux dd ". This On Thu 2003-12-04 at 01 46 Matthias Saou wrote
> Craig White wrote
>
> > OK - I have no problem booting from rescue disk and chrooting to the
> > hard drive root directory but the problem that IHelp Me! Please.
Help if it probably to understand with one problem.
After performance of updating of a package kernel (RedHat 7.3)
there was a following problem.
On a server two processors which aTrying to upgrade rpm - I was in a loop needing to update popt and
up2date/rhn_register and finally without thinking I removed all the
rpm rpms.. (rpm-pythyon rpm-4.03.) etc.
Is there a tarball anOn Tue 2 Dec 2003 Stephen Kirkpatrick wrote
> I would check if you have Redhat 's GPG key installed. Run
> gpg --list-keys
>
> Running this on one of our 7.3 systems gave
> pub 1024D/DB42A6I have installed RH 7.3 many times in the past but I am having trouble
with my current install. Right when the installer attempts to begin to
install the packages I get this error
An error occuWhat is the difference? I see both running on a suspicious box. Could CROND
be bogus?
< <JAV > >
Okay it 's time to post this here.
A client of mine has a sendmail server that up until 2 days ago has worked
flawlessly. Then suddenly it started slowing down. Nothing in top showed
anything beatingI ran up2date to get the latest kernel errata on an RH7.3 system and it
complained that the package wasn 't signed.
Has anyone else seen this? If it 's just that I don 't have the right keys
on my ringHi
We had just upgraded Linux from 6.2 to 7.3 and is having problem with
.bash_profile 's 'exit '.
User 's .bash_profile reads as follows
...
cd /dir1
./menu
exit
When user login menu will be promHello All
We seem to have problems on the /var partition of one of our machines. It
started with exim playing up like
"Couldn 't create message log /var/spool/exim/msglog//1APInN-00072C-Qh No
spaHi All
I just transported a program from Red Hat Linux 6.2 to Red Hat Linux 7.3.
The C program has a line stating
system ( "whoami ")
The permission of the executable is 6777 (ie. -rwsrwsr Hi All
Here is the problem that I am currently experiencing on a production server. I
have a Software RAID1 array that consists of two 36GB SCSI 160 drives. I cat 'd
out /proc/mdstat and here is does anybody have any recommendations for wireless pc-cards with 802.11b
protocol. my zonet/realtek rtl8180 card is narrowing the (debug time)
vs. (cost of new card) purchase limit.
thanks
philip
I will be out of the office starting 11/24/2003 and will not return until
12/01/2003.
What program or possibly how can I check what service is using which port.
I 'm trying to set up Squid to use port 80 and I 'm getting an error that the
port is in use
TIA
Blessing
Valhalla-list@(protected)
Hi
i wanted to know is there any support for SATA hardrives in RedHat Linux.
thanks
Arshid
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN " >
<HTML > <HEAD >
<META http-equiv Content-Typ >
>
>Date Mon 27 Oct 2003 17 49 24 -0800
>From j debert <jdebert@(protected) >
>To valhalla-list@(protected)
>Subject "umount -f -a -t nfs " fails if server unreachable
>
>When the nfs server is downI am away on leave until the 24th November.
For urgent IT issues please call Gary White on 0208 498 3481.
Gareth Nicholas
Group IT Manager
Newsquest North London
hello
i just upgraded my rh73 to kernel 2.4.20-20.
after that rc.sysinit is unable to log messages.
"rc.sysinit blah... " are missing completely.
messages from network interface config do not all shI have a problem I have set up a task as
a cronjob but it only works when I restart the
crond daemon in the /etc/rc.d/init.d/ directory.
The statement is
* * * * * echo "Hello " > > /tmp/test.txtI was able to setup SSH between my linux box and the solaris
box and can run ssh solaris_box -l joel ls
with no problems (it doesn 't prompt for password and it gives
me back a list of files in my hHi
Redhat announced that they will not support rh 7 8 9 soon and
encourage people to migrate to enterprise version. My question is what
version should I use WS or ES if I want to setup it as aHi To All
I seen this statement in the Internet 'Make sure your web server supports
the If-Modified-Since HTTP header '.
My question is how can I configure If-Modified-Since in linux RedHat 7.2?
Is Hi
I am trying to use rsh for submiting a job from a server to a remote host.
I have enabled rsh in both the machines by creating /etc/hosts.equiv files
with the IP addresses of both machines. I haveI realize upgrading from 7.3 to RHEL 3.0 is not supported by redhat.
Can you do it?
Can you upgrade a 7.3 box to RHEL 3.0?
Has anyone attempted it?
You should just be able to do a rpm -UVH on the RPMSDear all
I am a new user for linux I meet a question
for redhat 7.3.(kernel 2.4.18-3)
That is I recompiler my kernel using 2.4.18-3 or 2.4.22 but I
meet a stange event that I can unmount rTodd
try by commenting out the line below in your
sendmail.cf file
dnl This changes sendmail to only listen on the
loopback device
127.0.0.1
dnl and not on any other network devices. Comment this
ou |
|
|
