 | | | Red Hat Linux 7.3 | | Sorry but the end of the email got cut off. Here it is again and
hopefully in its entirety this time.
---------- Forwarded message ----------
Date Wed 21 Jul 2004 21 22 28 -0400 (EDT)
From Hi All
I have files that I would like others to have read only the machine in
question is a linux dhcp server there 's only one username & password to
this box.how do I create another account to Hi All
When I type ifconfig -a I get three interfaces eth0 lo & vmnet1.Can
someone tell me what vmnet1 is?
Rgds.
Harry.
http //www.bbc.co.uk/ - World Wide Wonderland
This e-mail (anI have running RedHat 7.3 with kernel version 2.4.20-18.7smp on a IBM
Netfinity 4500R with two processors and 640MB of RAM. This is my email
server running sendmail 8.12.10 but after a couple of dayDo not disable the IP address 127.0.0.1 as it is used
internally. This address is used when a client task
running locally needs to talk to a server class within
the same machine.
It is the addreI an article in linuxjournal that helps to make a personal distro with RH
7.3. It?s sounds to me like a dream... use ks without disk change (only one
CD) and my instalation is updated!!!
KS is Hi
The command mii-tool gives you speed & duplex settings of your onboard
nic this command works on linux 7.2. however the mii-tool command
doesn 't not seem to work on linux 5.2 kernel 2.0.36.....Hi
It seems that the fedora-list is not working -- maybe I am wrong but I
don 't see any message from the list including my posts and never got any
reply (I have registered with it a while ago).Hi
I have a fc1 linux system. A few days ago I changed its hostname and ip
address from a test system to a normal system. The up2date and yum were
working well before this change. After the Hi All
When I try to run a terminal session in KDE it flashes up then
dissappears? any ideas whats wrong. It works fine in gnome.
Rgds.
Harry.
http //www.bbc.co.uk/ - World Wide WonderlI have a RH7.3 which came with XFree86-4.2 version.
This did not detect my Intel 82845G video card. So I
upgraded my Xfree86-4.2 to 4.4 version and it detected
my video card and the resolution was Hi All
Where in the /var/log/cron would you see if your jobs are successful?.
Rgds.
Harry.
http //www.bbc.co.uk/ - World Wide Wonderland
This e-mail (and any attachments) is confidentialHi
How can I change my keyboard settings to uk from the cli on redhat
linux. When I try to enter pipe | I get >.
Rgds.
Harry.
http //www.bbc.co.uk/ - World Wide Wonderland
This e-mail Hi all
Can somebody explain what flood ping is more importantly what it can
tell you about your network.
Rgds.
Harry.
http //www.bbc.co.uk/ - World Wide Wonderland
This e-mail (and a
Hello
Since yesterday I have a huge network traffic increase
Is goes from a 12Gb to 45Gb a month.
Somebody is messing around.
I did the following
Only access sshd with one ip-adress
chOn Fri Jun 04 2004 at 10 34 54AM +0100 Harry Hambi wrote
> Hi
> I 'me running redhat linux.....where can I find the speed of my netrwork
> connection in the operating system?.how would one set
hi
I have a Dell latitue with a Redhat 7.3 my problem is that D-link does
not have driver for my card DWL G650 anyone know where I can dwonload a
driver for this card for linux... sorry foI run a RH 7.3 installation on a Compaq Proliant 6500 with dual pentium
266Mhz processors approx. 630MB ram and a hardware SMART-2DH RAID
controller and array. All file systems are ext3.
The seHi all
we are new at linux and we are trying to make our wireless card in
RedHat 7.3. We need to use this redhat version since we are using a
robot program that runs only in this version. Th
I 'm trying to get a farm of RH Linux servers to use NIS mostly for the
purpose of having uid/gid names match across NFS shares. Unfortunately I 've
come across all sorts of WEIRD problems.
One-----BEGIN PGP SIGNED MESSAGE-----
Hash SHA1
I have a couple servers behind the firewall which don 't have anything in the
"hosts.allow " file. I wanted to provide more security so I copied andHi
I have a P120 running RH7.3.
I have added a PCI USB 2.0 card because the motherboard is pre-USB.
On booting RH reports that USB-UHCI is O.K. but USB-OHCI failed.
Thee are no USB devicHi all
My wireless lan sniffer informs me of an access point connected to my
network...it give a me a mac address....how can I find its ip address?
Rgds.
Harry.
BBCi at http //www.bbc.co.uHi all
I 'me running linux 7.2...can anyone tell me how to release and renew an
ip address....i have 2 dhcp servers running on the subnet how do I find
out which dhcp box has allocated my ip addresI was given 7 CD 's with Redhat 7.3. I plan to put this onto a computer that will stand alone without windows. Any thoughts or suggestions will be appreciated.
Thanks
Jim Knivel W8WAO
<!DOCTYHi all
We have just installed a Red Hat 7.3 OS in a SuperMicro 5013C-i server.
Everything worked out fine but after a month running more or less the
server began to get blocke each 24-72 hoursSir
I have brought one new machine for testing on R.H. 7.3.
The configuration of the machine is -
CPU - 2.1GHz. (Intel)
Motherboard - D845GVSR (Intel Box)
RAM - 256MB DDR
HDD - 40GB SamHi
Thanks for your email. I am out of the office for today I will be back tomorrow. If it 's anything urgent please call my mobile phone at +65 9436 1007.
Best regards
Yousuf
______Doh! This actually pointed me in the right direction. I greped for nfs in
/etc/init.d and found that mount -a runs from the netfs script which by
default is on right? This box was configured from all
>From my linux I type the following nmap -sT -vv -O xx.xx.xx.xx-xxx >
network-scan.txt I want to see whether SSHD FTP TELNET RSH RLOGIN &
TFTP are
running on the remote system. If they |
|
|
