 | | | Red Hat Linux 7.3 | | I am having an issue getting the DHCPCD to function with a device that plugs
into a NIC that has a built in DHCP server I have tested the box on another
machine (MS Windows box) and it picks up the DOn Wed 10 Jul 2002 Ed Greshko wrote
> On Wed 10 Jul 2002 Samuel Monsarrat wrote
>
> > I am at a loss as to ejecting my dvd/cdrom devices!
> > I am running an up to date RH 7.3 and it seems thaHi everyone
Have hit a snag installing RH 7.3 (on CD-ROM) on my dual boot (Win ME)
Celeron 466Mhz machine with 192Mb Ram 6 gig & a 40 gig hard drive (slave).
Partitioning seems to have gone well running ntp or rdate sets my clock 4 hours ahead of where it should be.
dateconfig shows timezone set to america/detroit which is correct
however it also says timezone UMT. I 'm guessing that 's not I am at a loss as to ejecting my dvd/cdrom devices!
I am running an up to date RH 7.3 and it seems that ever since I
installed it I am unable to eject CDs.
My /etc/fstab file looks like
/dev/cdrom I tried to install 7.3 over the weekend on a freshly built machine. I
downloaded the 7.3 disks (the original 7.3 iso 's) checked the MD5 sums
and ran mediacheck on all three disks. I tried three tiWhen installing Valhalla on an oldish system it 's get 's to the part where
it 's formatting the /usr partition then freezes. The Caps Lock and Scroll
Lock LEDs will blink (Num Lock does not) but otherwEarlier today I popooed a suggestion to take seriously the job of reading the
RedHat Documentation. It seemed overwhelming to read 4 200 page documents
every 4 months for a new release.
Well I came ho i have installed valhalla on my hp omnibook xt6200 (kernel 2.4.18-5).
each time after i boot the machine ther is a weird behaviour regarding
my (removable) cdrw/dvd- drive. something alters my confHi
Can anyone recommend some backup software that will backup clients to a
single loader DAT drive.
Due to this being for my home network I cannot afford the ?800 or so
pounds that mosts companiesI am having trouble with my RH 7.3 recognizing my raid
device. I have an Intel src2u raid card connected to a
Kinston storecase w/ 9 181g scsi disks. The scsi raid
config bios successfully created 1 1I tried installing an Adaptec AVA-2902E SCSI card on my machine (a Dell
XPS T550...Pentium III 550 an older machine obviously.) My goal was to
connect a Hewlett-Packard CD-Writer Plus drive to the Well.. As someone kindly pointed out my post did not make it in it 's
entirety. Let me try again... Also.. let me state up front that the
problem is that I cannot allocate more than 8 loop devices vi
Can anyone recommend a good SCSI controller not made by Adaptec that 's
still on the market? Damn if we didn 't buy a Tekram DC-395 only to be
reminded that they 're not well supported. (They say theEvery time I put a CD/DVD in the drive it is mounted and a konqueror window
pops up. I 've tried everything to get rid of this "feature " but nothing seems
to work
- I removed nautilus
- I killed aI really hate messages like this but...
how the hell do I un-subscribe to this list??
https //listman.redhat.com/mailman/listinfo/valhalla-list does not indicate
how to un-subscribe though it doesI have an older machine PII using a Cirrus Logic GD 5446 card. In the
orginial install I had X running just fine. Did a up2date this morning
and now I cant get it started. Keeps complaining about
(EEI have a standalone system which is sometimes connected to the network. The
system is a client and uses DHCP to get an address. The problem is taht when
it is off the network it tries to get a DHCPhttps //rhn.redhat.com/preview/instant_isos.pxt
<https //rhn.redhat.com/preview/instant_isos.pxt >
IS there any difference is the ISO 's found at the above URL then the ones
found at the below FTP sHi again
I solved the problem below by removing the hotplug package.
It appears the /etc/hotplug/net.agent bash script was firing the 'ifup
eth0 ' which made this command being run twice at aFolks
I have been trying to find out where to set user defaults for adding new
users through the "redhat-config-users " command (i.e. System -- > User
Management). I noticed that redhat-config-users I am a little late to the valhalla party but this is not necessarily a
new issue and I have had this problem in other RedHat kernels also.
I have a lot of ISO 's lying around that I like to mount as lHello
http //www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/custom-guide/ch-bind
conf.html
<http //www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/custom-guide/ch-bin
dconf.html >
I am havinHello
I installed wvdial-1.53 on a RH7.3 Valhalla according to the advice not
to setuid save for pppd instead give rw permission to a group that I got
digging the wvdial lists archives. wvdial woDoes anyone know what it would take to bring a laptop from the United States
and plug into a Network in Europe? I have a pcmcia NIC both wireless
(802.11b by Cisco series 350) and a 10/100 RJ45 basGreetings all
I 'm trying to get onto a LAN using a Neteasy by D-Link PC Card installed
on my laptop. When I go into the network configuration utility it
appears that I need to choose a card butDoes Valhalla support USB Flash/Pen drive? If so which device file represents the device (i.e. /dev/usb0 or whatever)?
Thanks
Vidol
Hi folks
This is probably an easy question but where is the log of disallowed
packets kept and what is it called. logging is set to 1 in my firewall.conf.
Thanks in advance.
Randy
I am a Linux newbie. While experimenting with desktop manager settings (I
think) I set my system to boot into TWM and the only thing I can do is open
XTERM. I did this while in the Root login too. On Mon 2002-07-08 at 20 56 Stephen Liu wrote
> Hi Michael
>
> One further question.
>
> What is the difference between Samba and NFS. Both of them are new to
> me. I have their Howto download |
|
|
