 | | | Red Hat Linux 7.3 | | I 've got nforce 420 chipsen from nvidia it has
Geforse 2 MX embeded.
Xconfigurator detects it normaly after I set all
parameters in
Xconfigurator on testing it 's hunging up my system
deadly onlyHi Guys
I have a SMP machine running RH 7.3 but poweroff doesn 't actually shut
the power down. Reboot doesn 't reboot the machine either.
Anyone got any tips?
Thanks
Scott
My 2-disk RAID 1 for root stopped a few days ago. I been trying to see how I
can repair this RAID1 partition. I 'm still running on the remaining RAID1 disk.
Does the RH version of mkraid support thhave install with rpm mc-.....src.rpm and try to ungzip and untar source
but gzip wrote bla bla bla some error
how I can verify that it is not(or yes it is) cause of file system
corruption(of hdd(i How force anaconda to begin install process on machine with 16Mb
it is possible to install in this situation but seems to be no
solution how force anaconda to do that ?
To those who were curious probably not many but what the heck.
I rebuilt the kernel on a different box. ignored the modules and built
everything into the kernel. I had to use a network boot becauHi
I have just installed redhat linux 7.3. I wish to configure my philps external CD writer (connect using USB) to my linux system. Please let me know how do I do that.
Thank you
Venkatesh K Khello
I have this problem...
/dev/fd0 is not a valid block device
and there is a disk in my floppy so...
what should I do? I realy need my flopppy!
I m shure there is no physical problem!
thanHello all.
Thanks a lot to everybody who gave suggestions about this issue.
Summing it up the solutions seem to be
1) Connect from Outlook to some existing IMAP server upload
everything thereHello
I am installing redhat 7.3 on a system that has a ServerWorks Champion LE
3.0 chipset and an Integrated LSI 53C1010 Dual Ultra160/Ultra3 LVD SCSI host
controller. I was wondering if there is Hi
I hate Nautilus! It is invasive!
I 'am unable to open and extract executable files from CD rom. The Nautilus viewer appears and inform me that "There is not any viewer installed able to show " xconfig is used in 7.2 to configure the kernel.
What is it in 7.3.... Xconfigurator?
--
AJ Swint
MCSE 2000 A+ NET+
ajswint@(protected)
Greetings
Yesterday trying to resize my Windows partitions using Partition Magic the software shows an alert saying that one or more partitions were containing problems I did not look at it and preOn Sunday 11 August 2002 06 25 Mr. Adam ALLEN wrote
> My final year university project is coming around and on my work
> placement I am working with Cisco (ATM-Framerelay internetworking with
> MLHi All
Ever since installing 7.3 I 've had problems with my system crashing randomly.
In fact it took me a while to actually install it because it kept hanging
when installing the packages.
SometMy final year university project is coming around and on my work
placement I am working with Cisco (ATM-Framerelay internetworking with
MLPPP - FRF.8 gateways not FRF 8.1 hence using MLPPP rather tHi folks
Just upgraded to 7.3 did all the up2date stuff and configured my local
printer using the Laserjet 4 driver (though also tried others). It
prints fine except that when I send it a (.ps)
On 09-Aug-2002 Bryan Dina wrote
> Does anyone here have any qmail knowlege? What I want to do is make my logs
> better for qmail. I want a single log under /var/log/maillog that logs all
> smtp acDoes anyone know of a good howto for setting up mail on RH7.3 using
sendmail and virtual domains? Thanks.. Ken
Hi Every Body
I have just installed nis. Everything seems fine. I could run ypinit on
server and from client "ypwhich -m " prints out some file names and last word
of each line is my server name -I 'll never filter John nor Joanne or any of the Eds or Mr. Schwendt
these are the personalities that make up this list and their varied
insights are what make it so useful and interesting. As most ofhi everyone
I just purchase readhat7.3 and install it in my laptop IBM 600e.When config linmodem I encounter a problem .it is different that between the kernel running and the kernel tree under /usHi
After running my server for a while all of a sudden I will get vertical
strips on the string and it hangs as bad as plugging the computer out! Have
I done s.t. as bad as to be embarrassed aboi am using linux to access linux serve via ssh
i already copy the '/etc/ssh2/hostkey.pub ' to client
'~/.ssh2/hostkeys ' and rename it to
key_22_192.168.0.1.pub '
when i type ssh 192.168.0.1
then shohello
I have this problem...
/dev/fd0 is not a valid block device
and there is a disk in my floppy so...
what should I do? I realy need my flopppy!
thank you
> Did you look for a BIOS upgrade?
Yes that was one of the first things I looked for. I have the latest BIOS
that I can get my hands on but fortunately jch responded a few days ago
with a fix thatBefore I begin I just wanted to let the group know that I RTFM first.
Now I have the syntax in theory but I am having problems with
placement and possibly some other options that I am missing.
Estop sending me any more messages.
I 'm putting together a server for a customer and he wants a 3ware
7500-4 in it. Has anybody used these with Red Hat or just Linux in
general? Also has anybody had any bad experiences with the MaxtWhat 's with this "new " version of emacs/xemacs?
The key sequence to do things is very different.
Looks too much like a gnome app now?
How do I dump this gnome piece of software and get emacs?
--
R |
|
|
