 | | | Linux | | I had a SCSI system to fail this week on one of our low end servers. This was a
SuperMicro 1U with an Adaptec 7899 builtin on the motherboard.
Both drives have CRC and bus reset errors however Hello
I am having trouble interpreting the output of the
sar command with the -d flag. The DEV column major/
minor node numbers do not seem to logically correlate
to the device node files majorAfter updating my system I received the following error
VFS Cannot open root device "LABEL / " or 00 00
Please append a correct "root " host option
Kernel panic VFS Unable to mount root fs on I did get it to work finally.
You have to setup the kernel with these options.
1) Root file system on NFS (Turn on 'Kernel level autoconfiguration '
to get this option to show up)
2) Turn on BI 've just received a "Welcome to Red Hat Advisor " email. It
talks about a RHEL3U5 Beta and RHEL4U1 Beta.
I was under the impression (including based on a reply I think I
got on this list) that
I am getting an error on e2fsadm
"please give a logical volume name "
where I am correctly giving the lv logical path ...
( see below ).
Has anyone seem anything like this ?
JYard
UCLA
Hello All
I want to upgrade me RHEL3 system to RHEL4 but have the following to address
before I can do it.
I installed a 'ITE RAIDExpress ' card (ITE8212 Dual channel ATA RAID controller
(PCI Will RHEL3 automatically detect multiple LUNS on a scsi device or do I
need to tweak something?
Cheers
john
--
redhat-list mailing list
unsubscribe mailto redhat-list-request@(protected)?subWhen freshening packages on one of my Linux boxes I get this error
message (but not for every file I try to update
# rpm -Fvh
/sbin/ldconfig File /usr/lib/libkdeinit_kcminit.so.#prelink#.0CDKDoes anyone have any suggestions on what software (preferably provided
by redhat via up2date) that I could set up to create a web based
discussion forum for my research group? I am looking at freeHello list.
We need to analyze continously the use of resources and network.
What tools are good for this task?
We 've found sacd for the resources use. Is there something similar for
network us
Greg Wiggill wrote
> UPS software requires libstdc++-2.8.0
>
> Looking for an RPM for ES Ver3 and Ver4 ?
>
> Any ideas where I could find these?
For RHELv3
[egreshko@(protected) lib]$ rpI have a RHEL-2.1ES OS running just fine on a standard PC (with an IDE
disk).
I wanted to migrate that system to a new box with a SCSI disk.
I used a 3rd box running RHEL-3 to mount the new SCI have a user trying to compile on a newly installed server but he 's
coming up with the following errors
gcc compiling on Linux...using -D_REENTRANT -Wno-deprecated -DGCC...when
link use -lstdcI have a new academic license for 9 machines. The first machine went
fine but the second machine has been the same problem after 4 separate
full clean installs. I have varied the package mix aWhen my LINUX server boot up (CENTOS 3 UP4) I found
errors on /var/log/messages. Does anyone know what it
mean?
what is parport_pc.o doing?
Thanks.
insmod
/lib/modules/2.4.21-27.0.1.ELsHi
I am trying to configure an array of 12 disks in a RAID 10
configuration. All 12 disks are identical 146Gb drives.
First off on each disk I created a single partition which spanned the
whA co-worker swapped SCSI RAID controllers on our system running RHEL 3.0
and lost the partition table of our boot disk. He was able to recover
it (apparently) using gpart but the system will not boHello
How are load averages computed for the top command and the /proc/loadavg
file? Where do the numbers come from?
Thanks
Yaron
--
redhat-list mailing list
unsubscribe mailto redhat-li
Hi all
How to rebuild *.src.rpm in fedora 3? I used command rpm --rebuild
ethereal-0.10.0a-1.RH9.src.rpm. The system 's prompt was --rebuid unknown
option. Any idea why this could happI 'm working on a internet gateway for my home based on RH9
I want it to be "small " (P200/64MB) and "silent " (spin down disks and so on)
So I recompiled the kernel (2.4.20-x) with any unuseful thing Can anyone help me on this? When I installed Red Hat Linux 9 on my
computer it only had one processor (i686). I have another processor now
that I want to put in (another i686) but I don 't know ifI wonder how can I check if my installed "2.4.21-15.ELsmp " on "Intel(R)
Xeon(TM) MP CPU 2.80GHz " is capable to run 64bits applications.
Does anyone know how do I obtain this information?
--
redhathompson speedtouch router server rh8 apache 2.0.40
I have changed ISP and have got a new router speedtouch 510. For access
to my apache server I have configured nat on the router to accept
tGreetings
I have numerous RHEL sites at clients where I have email alerts sent
to me after the nightly backups. But as time goes on more and more ISP 's
are locking
down their SMTP traffic a
***/etc/mail/access contains
localhost.localdomain RELAY
localhost RELAY
127.0.0.1 RELAY
116.168.1.2 RELAY
mydomainname.com RELAY
# mail.mydomainname.com RELAY
cyberpromo.com RE
***/etc/mail/sendmail.mc contains
divert(-1)dnl
include(`/usr/share/sendmail-cf/m4/cf.m4 ')dnl
VERSIONID(`setup for Red Hat Linux ')dnl
OSTYPE(`linux ')dnl
define(`confDEF_USER_ID ' ``8 12 ' ')dnl
THE CONFIGURATION
***/etc/init.d/iptables contains
# (1) Policies (default)
iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -P FORWARD DROP
# (2) User-defined chain for ACCEPTED TCP packets
iptable |
|
|
