 | | | Red Hat Linux 7.2 | | Hello All
I am attempting to secure a linux server and using nmap I can see that port
111/tcp sunrpc is open. What should be done?
Thank you
Tina.
All
Yesterday I went out and using the automatic update agent I installed all
the pending updates to my 7.2 RH system. I had not run the updater in
awhile so there was a fairly large number of upI am seeing problems in RedHat kernels where previously fixed bugs are
reappearing. One annoying one is the KYLIX "file open " dialog lock up
problem that comes and goes.
The original kernel that Trynig to boot server off of disk with bootdisk. Receiving error message
Kernel panic No init found. Try passing init option to kernel. What
options is it looking for? Thank you in advance for yourThe SCSI adapter is active. Am I able to hook up an
external drive to the card turn it on and then probe the card to
activate the hard drive?
I 'm running RH7.2 (what a surprise).
Thanks
George
GeHello All
I have two HDD already installed on my linux machine. I need to reformat the
second HDD (/dev/hdb) and mount it as single partition /backup. My second
HDD has three partitions in it.
How Hi all
on a desktop machine I 've recently replaced my old ide cdrom with a ide cd
burner. To burn anything I need scsi over ide thus I 've changed the /dev/cdrom
link from /dev/hdc to /dev/sr0. EveryHi gurus
i 'm currently working on password security policies for our machines. I have
set up password ageing and pass minimum length on all linux and solaris
boxes. Now Linux (contrary to Solaris) haHi
I recently ran oracles database configuration assistant unsuccessfully
the system halted and I had to reset.
when redhat booted up I did not get a login prompt I get
bash no job control in t
Hi
I 've had our web server crash for the third time in as many month
yesterday. Each time we seem to have lost all the group ID 's which
apparently creates all kinds of issues. I managed yesterday to
Hi Garry
>How do you check this?
Assuming you ask me how do I check if both cpus are used I use command top. However also with some snmp tools I can observe utilization of both cpus.
Assuming you aHello All
I need to run a script in background from the shell. There is no user
interaction for the script. I don 't wan 't to use cron. I wan 't to do it
manually. How do I do it?
Thank you
Tina...Does any body have an idea why such errors come and how can they be avoided.
These kind of errors do not show up on any email sent from this server.
These errors come from emails generated with OutlooWhat kernel do you use? I am running redhat 7.2 with 2 procs with xbigmem kernel I noticed that it uses both of procs.
best regards vadim tarassov.
-----Urspr?ngliche Nachricht-----
Von GARRY VITHello folks
I 've just installed RH 7.2 on Intel workstation
with two Xeon processors.
I have no indication that RH utilizes both processors.
It seems that only one runs.
gmesg shows only cpu#0 initHi all
if any of you are running the constellation
sendmail 8.12.x + amavis-milter + f-prot
or the same with amavis-new and the spam-assassin module
I 'd really like to speak to you on some config --Boundary- _bcPROVdDnivAhWCRvAQNekZQJCZH
Content-Type text/plain
Content-Transfer-Encoding 8bit
Hi
Could anyone of you guys tell me how to dis allow to view directory on web page.
I have ApachHi all Linux Masters
Time to do somethig
My friend has done some serious stuff by doing this
rm /hisfile.c and answering yes
Well is there by anychance or way he can get back the
file ?
I read somewhIs someone know how to install configure and run server DNS on my machine ?
Although I filll named.conf file I can 't run my DNS . My named
(demon)don 't running . Of course I got bind-9.2 I am in the planning process to configure an e-mail gateway using MailScanner. http //www.sng.ecs.soton.ac.uk/mailscanner/
My concern is that they recommend Sendmail for the SMTP relay. They say I caHi
Im looking for troubleshooting suggestions.
IDE primary master detected in bios
IDE secondary master detected in bios
Fdisk /dev/hda works
Fdkisk /dev/hdb does not
I have a 32 CPU cluster all running Linux 7.2. What is the easiest way to synchronize the date on all the machines?
Thanks
Brent
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN " >
<HTMwhen i ssh -v -X machine
the i do login to the machine but in shell only
and when try to run one application i receive
following error
X Error of failed request 86
Major opcode of failed request Hi Luggers
I am facing following problem
I have 1 machine running X server at 7100 port
with xdmcp
This machine is installed with a software called
mathematica which has gui interface too
all clients stew i was trying to do that but it doesnt do anything?? vicki
will updating sendmail make any changes to the original config/ or
cause any interruption in the service? thanks vicki
Hello all
I have installed the second eth card in my machine but RH7.2
refuses to see it ...
Question ... How do I install it 's drivers manually? There is no
Linuxconf or Setup on this machine andHello
I 'm a newbie with Linux. I just install RH 7.2 and would like to write some code to learn C/C++.
The problem is that I can 't install gcc.
I have a cd with Gcc but it says that it can 't find c |
|
|
