 | | | Red Hat Linux 7.1 | | I will be out of the office starting 07/08/2003 and will not return until
07/17/2003.
I will respond to your message when I return.
Hi
Is there anyway to add another disk to the same 'filesystem '
or set the system up so that when diskA runs out of space
it can use diskB but both must be referenced at the same
mount point Thanks Jim.
I 'm not in the US and it 's going to be quite a long while
before we have a holiday .... and no prizes for guessing
what I 'll be doing while some individuals on
this list are going to beI am trying to compile the 2.4.20 kernel to include video4linux support and I
am having a problem. I run in the following order
make menuconfig
---and set the option for v4l
make dep
make clean
I had a problem in a user mode and went into root to check it out but never
made it it hung I reset the system and it starts to boot and hangs saying
unable to mount file system any Ideas??
DaviI have an old pentium box running 7.1 that acts as a
firewall between my cable modem and home computers.
The external ip address is configured via dhcp using pump.
Problem is that the computer fails tHi
I have a Windows program that I use (Called
'puTTY ' to SSH from a Windows workstation
to a Linux server. This program works with all
of the Red Hat Linux and UnixWare 7 servers
that I have here aHi
I have noticed that sometimes even after
restarting my Red Hat 7 (Seawolf) machine that when I run the "ipchains -L " command from root the command hangs after displaying the header line. I ha Problem with internal clock.
Mainly clock is coordinated by BIOS in old operating systems so an
overclock/change of FSB (on old system also) could affect the clock.
Mainly the internal clockHello
I need to copy a file from a server running SunOs to a 7.1 box. I can 't
copy it with scp ( coz there 's no ssh/scp/sftp client/server installed
on SunOS ) or with ftp or tftp due to internal Hi
Thanks Aaron for trying to help me out... but even
after making the changes the same problem is still
there... That is GET command is working perfectly
fine and the PUT command just empties theWe are running 7.1 kernel 2.4.9-34smp
Several oracle db 's
On an HP lh4-r
For no apparent reason the clock will start running very fast as in
gaining 50 mins in an hour.
We also run NTP but thiHello techies
I have one intel box with redhat 7.1 installed. I am using Intel Server Raid
Controller U3-1(that is nothing to do with linux system it is at bios
level). Initially I configured a raHi
I have set up xtftpd on my machine running Linux
7.1. When I use the put command to transfer a file in
the default tftpboot directory the transfer takes
place but the content of the source file I am having trouble getting my redhat 7.3 to be able to access the net. My
modem is a 3com u.s. robotics 56K faxModem (56K MESSAGE MODEM) but LINUX is
not seeing it. How can I make it see it or I have Squirrelmail 1.4.0 running on RedHat 7.1. I get the login screen
but I cant get past it.. Below is a message I receive after logging in..
Any help would be nice.
Bad request Missing or invaHi all
I am looking around for software that is
designed to run on a red hat linux 7 mail
server and that scans email messages
for (Windows) viruses before delivering
those messages to the WorksHi All
I 've been lurking for awhile and I 'm a clueless Linux newbie.
I installed 7.1 back in January and have been mostly OK with
it despite my cluelessness.
I have this scanner that I used back OK I just recovered my /etc/profile and fixed my installation. Thanks to everyone for their valuable help.
Using Red Hat 7.3 I just ran across a chance to install Red Hat 9. I remember someone inHi all
last night I lost power to my RH7.1 box and my windows box...
RH7.1 acts as gateway/router/firewall...
windows box is part of my private network...
when I brought them up again I had somehI rebuilt my win98 machine and lost a password that was saved - haven 't keyed
it in years. When I go to network neighborhood I can see the //prod server
but when I double click it I am asked for a Does anyone have a list of what and how they secure their linux box?
Thanks
Dave
....
How can i edit my startup file to include some instructions i use each time
i start my shell?
...
<html > <div style 'background-color ' > <DIV >
<DIV >
<P >I have been able to untar the Intel UPnP SDK correctly after re-install. Thanks. <BR > <BR >But I am having 1 small problem </P >
<P >When running 'm Hi. I am running Red Hat 7.3 and I just deleted my /etc/profile and can no longer log in. I was editing it saved it but Kate saved a zero byte file instead of what I saw on the screen. What can I d <html > <div style 'background-color ' > <DIV >
<P >I am trying to install Linux UPnP SDK. After 'untar ' libupnp-1.2.1.tar.gz and going into 'libupnp-1.2.1\upnp ' folder I do the 'make ' command. But i am getOn Wed 28 May 2003 omer wrote
> hi there all
>
>
> how can i change my existing static ip address with subnet mask
> like supose i have ip address 101.0.0.25 with subnetmask 255.255.255.0
> i Hi there
It seems that each time I run RPM to install/upgrade a package I see the
following error message (example)
rpmdb Suspiciously high nelem of 4294967295 on page 0
error db4 error(-30979)I just ran up2date on my 7.1 box and elected to only update the kernel and
xinet. The Kernel went from 2.4.18.X to 2.4.20.X. I received an error at
the finish "LILO test failed " this is not an ex...
How can i set an enviromental variable such that it remains (in the bash)
sesion after sesion...? Becouse i use 'export ' to set enviroment variables
and each time i begin a sesion i have to set |
|
|