 | | | Red Hat Linux 8.0 | | Hi all folks
Is Gefax still active
http //www.angelfire.com/linux/sfax/#email
I could not contact its author at daryl.g@(protected) All mails sent to
him previously have been rejected. Is there aI 'm about to start a project that has a RH 8.0 box using an external USR 56K
modem to act as a dialup remote access server for a Windows XP client. Can
anyone point me to any how-tos that might make Anyone got any ideas on why when logged in as a user I can kill
processes (owned by root) from a terminal window with 'sudo ' but when I
use the system monitor (entering the root password) it hangs? Anyone that can share a nifty clue for getting to the bios on a 2g+
P4? It boots so fast I never see a chance to press anthing. I tried
holding down ESC or pressing it repeatedly as bootup happens.
I got a brandnew IBM T40p (type 2373). Does anybody have concrete
experiences with installing (and using of course) RHL 9 on a T40p (the
centrino line)?
I looked around and found the following informI tried installing a new kernel on one machine and got the following
error message
[root@(protected) root]# rpm -ivh /var/spool/autoupdate/kernel-2.4.20-13.8.i686.rpm
Preparing... #######Hi all folks
Each time on running "apt-get update " I found following message at end
of update
....
......
......
Fetched 639kB in 11s (54.4kB/s)
Processing File Dependencies... Done
apt-get rpm/rpHi all folks
Lucent modem (winmodem)
Ok that seems to have worked.
May 29 13 17 21 pc9814 userhelper pam_timestamp
timestamp file `/var/run/sudo/millerlw/unknown root '
is only 120 seconds old allowing access to redhat-config-date
I installed XFree86-libs but unfortunately I get a Can 't Open Display Error when trying to run an X application such as xterm.
Sorry
I 've googled with no luck I just know this is a stupid question but.
why is it that I can browse my FAT32 partitions nautilus but when I cd
into a directory on a FAT32 partition or try to mv oHello
I was wondering if anyone could tell me what packages I need to do a basic installation of X. This is going to be on a server and I am going to be tunning X over ssh. I need X so I can instaHi
I am having a small problem. When logged into a system as
a user and trying to run programs or commands that require
su privileges the programs bombs and this error is in
/var/log/messages. I I have a LSILogic MegaRAID SCSI 320-2 on a system here running RedHat 8.0.
I 'm new to RAID but seem to have configured it ok to run RAID 5 with one hot
spare disk. I thought I 'd test the removal of onHallo list
do you know how to make this PCMCIA card work on RH8? It 's Netgear 54 Mbps
Wireless PC Card 32-bit CardBus WG511 2.4Ghz 802.11b/g.
What I 've done
- assigned the chipset in the /etgot this through error log of httpd...removed scoreboard line in httpd.conf
file and httpd can be used again...
is there of any importance of this file?
[Wed May 28 16 16 01 2003] [notice] Digest gehi
i saw this error after running mailq and then found out it is because 1
user is his quota limit set in /var/spool/mail
last time before i migrated over to rh 8 from rh 7.0 i still will receivHello all
I have mounted an iso image on computer a and exported
it via nfs to computer b on a lan where it appears as
/mnt/disc1.iso. Both machines are RH8.
On computer b I can copy it from /mntHi all folks
I need following dependencies
libgal.so.8
libgnomeprint.so.11
for installation of gefax-0.4-3
# rpm -qa|grep libgal
libgal19-0.19.2-4
# rpm -qa|grep libgnomeprint
libgnomeprint15-0I 'm pulling an older smaller Hdd out of my box. /var is on it 's own
partition on that drive (hda2). What is the easiest way to move it to
the larger drive on which the rest of my system lives and moUsing Redhat 8.0 and I am running into problems with my internal lan.
Current setup is that I have a 4-port Adaptec 6944TX interface. Two of
the ports are on a 10.2.0.0/16 network and another is the Hi All
We just upgraded all of our computers to the latest Redhat kernel update
kernel-2.4.20-13.8. Now we have two computers that freeze-up whenever
we run cdrecord or cdrecord-prodvd. Cdrecord I 'm somewhat experienced with networking but have run out of ideas
with this.
Please bare with the onslaught of data
A quick picture
I 'll just use the last to octets of ip numbers since they all sHi all folks
"Send a fax " works fine as ROOT ONLY. kprintfax works both on "Cups and
LPRng ". An OpenOffice document can be faxed direct with the "Print "
command and the recipient receives a high Hi
Back in April I was able to use cdrecord on my RH 8.0 system
to burn RH 9.0 CD 's from the ISO 's I downloaded.
'cdrecord -scanbus ' worked then producing
Cdrecord 1.10 (i686-pc-linux-gnu) CoHi all folks
If I expect to check whether packages AAA BBB CCC DDD etc. have
been installed simultaneously what syntax shall I issue in following
commands
rpm -qa | grep AAA/BBB/CCC/DDD
Thankhi all
i did a repquota command and can see that there are 3 uids displayed
at the bottom of the rest of the usernames. how do i check where the uids
are from and how to delete it from the syHi all folks
Permission changed back to its original state after rebooting the PC
Test performed as follows
$ ls -l /dev/modem
lrwxrwxrwx 1 root tty 11 Apr 22 12 24 /dev/modem Hi All
I am running the squid caching software and it was working fine
but just 2 days ago we started having problems downloading webpages.
Typically we would get most of the content and just be mSorry if this is offtopic.
I 've hunted about and come up with nada.
Has Redhat (or anyone else) written any decent code for converting and
transferring ATRAC-3 format audio files.....ie something that |
|
|
