 | | | Red Hat Linux 8.0 | | Hi all
We have several clients who have dial-up accounts across a WAN
that point to our Linux servers to send and receive their mail.
What tends to happen is that they don 't download their mail rAll
I have an application which is statically linked.
It uses dlopen() and dlclose() calls multiple times.
First time the dlopen()/dlclose() pair succeeds.
But the second one fails with segfault.hello all
i am trying to set a samba print server for a m$ network (using red-hat 8.0
and samba 2.2.7-5.8.0).
everything is working fine when installing drivers manualy on clients but
when i try to sHi Randy
I did terminate the backup unit too terminator light read green for DLT
which is what it is. I have it connected to channel A on the adapter it 's
a 2 channel card.
--
Psyche-list maHi
I just installed a new tape backup unit in my RH 8 box and am trying to see
if it?s installed OK. Connected to an Adaptec SCSI card it?s a DLT Tape 4
unit.
I ran the below mt commands and got Dear All
WORST VIRUS EVER--CNN ANNOUNCED
PLEASE SEND THIS TO EVERYONE ON YOUR CONTACT LIST !!
A new virus has just been discovered that has been classified by
Microsoft as the most deDear All
What is the default format utility in red hat [no GUI Tools please]?
Thanks
SureshA
uarusu02@(protected)
During the linux startup on my RH 8.0 Dell Dimension 4600 I see this
message "Localhost is bad " when lpd starts (however lpd still gets "OK ").
When starting Gnome as root there is this message
"When I installed Linux 8.0 I have also installed other packages a.go. Postgresql 7.2 GNOME etc. I want to know how I have to configure pre installed packages. when I give command rpm -q posgresql iDear 's
Is their a manual of all linux 8/9 commands on internet. I am really fed up with GNOME/KDE. As they usually start with a bug just like childish windows and start sending the bug report. It is All
I want to create a cd that will boot and automatically install a custom (kickstart) version of RedHat 8.
I want the ks.cfg on the CD as well as the necessary packages for the kickstart installhi all
i am unable to print anything on my hp laserjet 5l thru redhat 9 i
disconnected the pinter restarted & again rebooted & restarted it detects
the hardware & says it has configured the printevaleed wrote
> hi all
> I have installed redhat 9 on my pentium 4 attached to this pc is an
> HP Laserjet 5L printer & this pc is on network.
>
> i dont have a hardware printserver device ihi all
I have installed redhat 9 on my pentium 4 attached to this pc is an HP Laserjet 5L printer & this pc is on network.
i dont have a hardware printserver device is there anything to make tHi
has anybody any experience how Linux runs on Xeon processor?
And in Compaq Proliant DL380?
Thank you
G?bor
Dear All
I have just install Linux 8 installation goes fine. I am able to ping my system from other computer but could not able to turn on my telnet services as they are OFF by default. Please telIs it possible to use a "noapm " option in the GRUB prompt to disable APM
using a precompiled kernel? I 'm running 2.4.20-20.8 and want to test it
without apm on my Gateway 433c.
Do I have to recompile I recently for the first time used up2date to update everything on one
of my systems (I am weary of automatically updating anything). After
the update bash no longer recognizes the "su " command fromI am working on a solution for the onboard audio on this PC running RH8.0.
The Intel site suggests for RH8.0 linux and this motherboard (Intel D865PESO)
to use the driver ADI Integrated Audio DriverI upgraded the processor from a PII to a PIII. Looking at /proc/cpuinfo it
shows that it is recognized. Is there anything else I need to do to the
Linux config in order to take full advantage of theThis was an errata kernel released for Red Hat Linux 8.0 back in Feb
2003.
If anyone has this file I would really appreciate being able to
download it from you.
Dax Kelson
Guru Labs
I 'm trying to track down a performance bug in the RHL kernels.
I need to know all the RHL8.0 errata kernels versions (and get a hold of
the i686 RPMs).
2.4.18-14 (shipped RHL8.0 kernel) <-- no problI 'm stuck with RH7.0 'coz I 'm using iBCS. to run
foxpro for SCO UNIX. at the howto I 'm using it says
that for to use ABI must install a clean kernel. it 's
a clean kernel what they call 'vanilla '?. ifThis is in followup to previous posts on this subject
The integrated network card in my new Dell Dimension 4600 has the product
name
Intel? PRO/100 VE CNR (TP)
Intel Part No. is CNLA6000 CNR I am not able to configure my modem in redhat-8.
on using wvdialconf it shows the modem is on /dev/tttyS0
But when i am trying to activate the device I get messge "cannot activate the device... "
On seHi all folks
I tried with following syntax to download
http //www.linuxplanet.com/linuxplanet/tutorials/3174/1
(Linux Partition HOWTO which consists several pages)
$ wget --no-parent
http //www.liMy new Dell Dimension 4600 has "integrated Audio and NIC " neither of which
were identified when RH8.0 was installed.
Despite sustained effort I cannot install these functions. I have been told by
peHi all
If I have been using Binary RPM 's and then switch to source
RPM 's to update my packages on the system how do I go
about updating the RPM database so that when I run a package
query (rpm -Hi all folks
I encounter problem in starting GNOME desktop with following warning
popup
"There was an error starting the GNOME Settings Daemon.
Some things such as themes sounds or background se >Message 2
>Subject RE XF86Config file question - starting XWindows in level 3
>From "Stephen Liu " <satimis@(protected) >
>To <psyche-list@(protected) >
>Date 29 Aug 2003 01 01 49 +0800
>Reply-To |
|
|
