 | | | Installation | | With the forthcoming end-of-support for RH7.2 we 're looking for a way to do
an off-line up2date of some test servers we will soon be building.
We have ALL the 7.2 header and rpm files downloadeNow that we have two operating landers on Mars I 'd like to watch it and
look at the movies available at www.nasa.gov.
I 'm running RedHat 9 (KRUD from tummy.com) and the live video is working
grI am looking to upgrade my test servers at home. I
want to use the hyper-threading technology of the P4
what motherboards are good for Linux and allow the
hyper-threading features in the new P4?
I am having a problem where users outside our network are unable to send
mail off or our server - error "unable to connect to mail server. " Users
outside the network are using dial-up accounts and MI need to start camstream from an ssh session on my computer at work.
This allows me to change the settings through its X11 gui. (This is not
entirely convenient because it is very slow over a diaPlease ignore this message as it is only a test. I have sent a couple of
messages to this list which have been empty when they arrived back to me
on the list. I think it was a screw-up with my charaDoes anyone know of a device that would allow the connection of USB
devices through a wireless link? I would like to be able to insert
somesort of device into the USB port that would transmit the Linux Enterprise 2.1
Compaq SCSI bus with 5300 raid controller.
tar cvf /dev/st0 /
/dev/st0 Cannot open No such device.
Am unable to track down the problem with getting
data on to the tape.
> So I removed these rules and tried iptables -I INPUT 1 -p udp -s
> 0.0.0.0/0 -d 0.0.0.0/0 --dport 53 -j ACCEPT
>
> Why? Do you want to prevent outside DNS resolution for your system?
> YoWhen replying to a digest message please change the Subject line to
something descriptive. More useful hints can be found at
http //www.rhil.net/docs/faq.html#using_list
On Sat Jan 24 2004Hi
I have a new rh9 install with apache 2 installed. By doing apachectl -V I
can see where the software 's installed...
Want to remove this install and instead install apache 1.3 with suexec
Ok. So I 'm able to get my modem to dial out but when I try to use the
access numbers for either AOL or NetZero all the modem does is
1. dial the number
2. get a handshake
3. hang up
4. redialHey everyone
Heres the problem at hand. About a month and a half ago I had XP
loaded on to my system then I decided to try out Linux (9) so I particioned my
hard drive so Linux would
Dear Redhat-install
since nobody tackled my last e-mail about problems
printing from one Linux box to another let me
ask for help a bit differently. Again the problem
is that the linux PC cProblem
I want to put a new disk into my home pc (need space). I wnat to install
RH9 and fc-1 and w2000 plus be able to boot the existing w98.
I tried this but have problems.
What I did
Hi all
i am a linux new bie and i know basic linux just got an ftp server up and am proud of my little achievement )My next target is IPTABLES.
i wanted to know what would be a good course of stuHi. New to this list.
I hate to sound like a newbie but I can 't get sound to work on this
workstation.
A Dell Precision 650 newly installed RedHat 9 up2date as of today.
a
# cat TrythI recently upgraded to RedHat 9 from 7.2 and have been slowly upgrading my other software to run under it.
I used a CISCO VPN program to get into my work computers. On doing the install I get the Hi
I 've RH9 installed on Intel PII in dual boot with W2K. I 've 30 GB hard
disk. I 've partitioned the hard disk so that W2K has 20 GB and RH 9 has
10 GB. During installtion I specified GRUB (GUI
Thanks for all the help !
on the rh9 box i enabled lpd and in this case assigned a specific ip
address to the printer. Hmm
maybe one day i will share the printer on the net just to see whatI 'm running sendmail on a RH 9 box. Does anyone know how to block mail
coming from a mail server with a DHCP assigned address?
Thanks!
Dan Doucette
Redlon & Johnson
207-773-4755 ext. 123
Hello Folks
I am wanting to upgrade my Evolution and have run into several
dependencies not all of which I can resolve.
I have used Bob 's very useful whats_where.cgi script but it was unable
On Thu 2004-01-08 at 12 46 Rick Stevens wrote
<snip >
> >
> >
> > Hello Rick tried your advice above but it still doesn 't work
> > unfortunately with or without the 'partition 4 '
> >
> >Hi Gurus
I have installed RHAS 3.0 ES on Dell PowerEdge 400SC. The install process was successfull and during the process I have selected the option of writing/creating the GRUB boot manager on mI 'm using the Red Hat Network Alert and Up2Date to get the latest version of ethereal-gnome and get the following error.
UP2Date
ethereal-gnome-0.9.16-0.9.0.1 to ethereal-gnome-0.10.0a-0.9.0.1
How do I open Port 53 on the default firewall installed with RH9? In the
graphical interface it only has the option for allowing WWW SMTP POP
SSH or telnet. How do edit the firewall tools via
Hi all
I just configured an ftp server on my laptop and I have got a private ip
from the home router we are using road runner high speed internet.How
can a guy from outside access my ftp serverI am preparing to install RHE3.0 on an IBM Netfinity 7000 M10 server. Can
someone tell me which install manual to use? X86 i/p series or z series.
I 'm voting for the x86 architecture but of couJust wondering what everyone is doing for updates for their older RH boxes.
Thanks
Keith.
Hello. I accidentally reformatted the boot disk I created during my RedHat
9 installation (I know I should have labeled it properly). I have only
been able to find documentation relating to cre |
|
|
