 | | | Installation | | When I do a remote vnc install of rhel3 or 4 everything goes fine until
firstboot. On firstboot the license issues etc are displayed *at the
console*. I don 't want to have to go back to the consoleI cannot ftp or telnet to my redhat 9 linux box.
It can ftp or telnet to itself but I cannot do so from any other machine.
This is just a test machine so please do not tell me to use ssh. I just waHello all
How to mount a USB pen drive? What is the device names and
example syntax. How are they mounted automagically at insertion?
--
MTIA
Nix
Unlike other servers that have X sort of running when doing a "ps
aux " I get this
root 2804 99.8 0.0 0 0 ? R 16 23 93 40 [X]
(note the 99.8 CPU and the name [x] rather thanI installed RHEL 4 then used up2date to make it current. When I
restarted the process X is using 100% of the CPU. I ssh into and don 't
use the X windows server. What is going on?
How do I kill the thhi
i installed linux CDs using text mode 'anaconda ' because i was having
troubles getting the GUI version to display properly. (first i tried
different resolutions and "nofb ".) but text mode see
> On Thu 2005-10-20 at 09 58 -0700 gerrynix wrote
> > Hello all
> >
> > Which Linux command is equivalent to the SVR4 truss command?
>
> Try "strace "
>
Yep . . . exactly what I needed and as
> >Hello all
> >
> >Which Linux command is equivalent to the SVR4 truss command?
> >--
> >Nix
> >
> Try watch
> Usage watch [-dhnv] [--differences[ cumulative]] [--help] [--interval <n >]
> [--hi
just installed FC4 into empty partition on same drive as WindowsXP
(disk1). i 'm aiming for dual-boot using NTLDR menu.
i think i messed something up cos now during reboot i get told that NTLDRHello all
Which Linux command is equivalent to the SVR4 truss command?
--
Nix
Well my 10 year old Compaq laptop died last night. It had been running
Linux for several years. Now the display doesn 't light and it just beeps
at me. Time for a new one! So what 's your favorite lapI was successful in configuring the redhat diskless environment.My
next requirement is to have a nfs server supporting both Redhat and
Sun Solaris x86 Diskless environment .Has anyone tried this befrhel4
I 've tried using combinations of md and raid noautodetect kernel parameters
along with settings in /etc/mdadm.conf in an attempt to influence what devices/partitions
get assembled into md3 at Hi all
I am facing some problems while start squid server in
RHEL 4. Pls help me. I am send the problem I am
facing
[root@(protected) ~]# service squid start
init_cache_dir /var/spool/squid... /etc/initHello
I have FC3 with kernel 2.6.12 compilled with many patches.
How I can to upgrading the sambe for FC4 ?
I must keep the kernel 2.6.12
Att
Rodrigo Faria Tavares
e-mail rodrigofariat@(protected)For anyone out there with some ideas...
To make a long story short...it has been a while since i booted up my linux
box under the desk. It is runing RH 6.2...that should give some insight! I
wanted tHi all
Got a quickie here maybe not doable?
I want to configure my Sendmail system to accept email addressed to
my IP address (24.91.157.212) as well as to "kinz.org ".
Using the virtuser table I Apologies in advance if this post bothers anyone.
/proc/sys/net/ipv4 parameters
Just gave an answer to someone on this stuff and realized that this info
although readily available in the lartc manOn a RedHat ES 4 system I was checking for null passwords in /etc/shadow
and came across a "x " in the encrypted password field (2nd field) for a
few accounts. I have seen "! " "!! " and "* " for lockedOn Wed Oct 12 2005 at 09 02 25AM -0500 Sidney Abrahams wrote
> I have a need to have my WS4 Enterprise automatically start up an
> application which requires it to have an X and a CR passed to it I have an Adaptec SCSI 2960 adapter connected to a Seagate 36 Gb and I
connected the Jaz on the old 50 pin connector terminated the cable and
booted up. DMESG | more shows me the Jaz on ID 4 but it Hi all
I 'm hoping one of you knows which magic wand to wave even
though half an hour of googling has made me rather
sceptical. Here goes at any rate...
What is the X and/or console equivalent ofI have a need to have my WS4 Enterprise automatically start up an
application which requires it to have an X and a CR passed to it to execute
it whenever my machine is rebooted. How can I do that and Hi all
I 'm trying to get a Red Hat ES 4 install up and running using an external hard drive for additional storage. The drive came out of the box formatted with fat32. However fat32 doesn 't suppoHello.
I had a system crash during an up2date session. The GUI is a casualty.
When the system tries to boot into the GUI mode it goes blank puts up a
message about a failure to start the fixedI regularly have to install many different versions of RHEL (3 updates 1-6
4 GA and update 1 on many different architectures - ia64 ppc i386
x86_64). I currently do these installs via nfs but nsorry
i included messages for the whole day (
Thousands of Apologies...
Regards
Tony
V
Click here to get FIREFOX browser...the browser you can Trust !
http //www.spreadfirehow bout trying out www.samba.org?
keep posting here i m sure u will learn lotsa stuff...i did anyway.
Rgds
Tony
----- Original Message -----
From redhat-install-list-request@(protected)
To reHello
Been a longtime reader of this list.
Think you guys are great and I 've learned quite a bit.
I have FCv4 sitting on a Dell Power 400 server sitting in a small Windows
Domain
network. Windows System has 4 scsi disks - sda/b/c/d
sda and sdc are level1 raidset to be mounted as root.
sdd just happens to have been used as part of a root raidset during testing.
RHEL4 keeps constructing raids |
|
|
