 | | | Installation | |
-----Original Message-----
From redhat-install-list-bounces@(protected)
[mailto redhat-install-list-bounces@(protected)] On Behalf Of
redhat-install-list-request@(protected)
Sent Friday June 09 20Dear Sirs
We have recently purchased Redhat Enterprise Linux ES version 3
and Redhat Cluster Suite version 3 to establish a high availability
cluster in Active/Passive configuration with shared stor
-----Original Message-----
From redhat-install-list-bounces@(protected)
[mailto redhat-install-list-bounces@(protected)] On Behalf Of Rick
Stevens
Sent Wednesday June 07 2006 9 15 PM
To Getting shello
i want to implement IP load balancing on my redhat box running version
2.4.21-37.ELsmp AS release 3.
what all packages do i need to install and how to configure TCP/UDP load
balancing through
-----Original Message-----
From redhat-install-list-bounces@(protected)
[mailto redhat-install-list-bounces@(protected)] On Behalf Of Rick
Stevens
Sent Monday June 05 2006 8 35 PM
To Getting starI 've got a Motorola Razr V3c phone and am looking for some
software to use under Linux (RH9 or FC4) to set it up. Anyone
know of anything out there?
Thanks
Brad Mugleston KI0OT
There are 10 typeHello
I 've got an Adaptec AIC7899 SCSI interface on an IBM intellistation (MP)
that 's giving me fits.
I 've searched for a solution and tried
linux noprobe then selecting the aic7xxx driver duringI have a storage connected to two systems over FC.I would like both
system to read/write from same partition(but different directories).I
don`t want to use nfs.Any suggestions?
OS is RedHAt 3.0
chDear All
I have two hosts (rhel1.example.com IP 192.168.0.10 rhel2.example.com IP 192.168.0.12)
I have share the folder /mnt/share in samba service.
/etc/samba/smb.conf
[newshare]
coHello
I am trying to install fedora with alternate install method
(hard drive installation) as
described in the install guide with the iso images. Am able to boot
into a text mode inHello
Apart from changing the /etc/grub.conf which is a symbolic link to /boot/grub/grub.conf what other config is there to be changed when one makes a new partition after installing grub before theHi
This is Owen
Anybody can help?
I bought a Red Hat Enterprise Linux ES
I have a question if I have more than one server boxes
must I buy more packages? or only one I can install to differI have configured a RAID 5 array usinf mdadm with 8
disks. After my last reboot it reported it was running
in a degraded condition with only 7 disks active. ow
do I fix the eighth disk and get it back
Dear Linux gurus
I 'm having problems with my gnome desktop/nautilus.
I 'm running Fedora core 2 gnome-desktop-2.0.
I had this problems before but I can 't remember the
solution. Here are some symI got a Motorola Razr phone over the weekend but now I am in the market
for a way to get it to talk to Fedora2/4 &/or RedHat9. All I want to do
is organize my phone numbers and upload/download pictur
can u pls help me on this....my ctrl+alt+f1 to f6 consoles r nt working??
the keyboard is working properly!!!
wot cud b the problem??
destiny drives the world...
try driving destiny!!!
<P >
-------------------------------------------------------------------- ?
root on LVM requires an initrd image that activates the root LV. If a kernel is upgraded without building the necessary initrd im ?
What is LVM??
should I choose ext3 or LVM while partitiong???
am a little confused?
destiny drives the world...
try driving destiny!!!
<P >
<BR >
What is LVM?? <BR >
<BR >
should I choose extAre there any text-based counterparts to the graphical tools
"system-config-xxxx " . . . Such as or similar to linuxconf bundled in the FCs?
--
Thanx
Nix
<div >Are there any text-based coun ?
Hi I know a little about the fedora 4 partitions....i have actually done default partitions n installtion of fedora 4 many times...now want to create sum proper partitions....
DISC SIZE 20GB (othIn booting this message appears in the boot sequence
aic79xx (2.0.8) AUTOINSTALL not set in its dkms.conf
"aic79xx " is the name of the (Adaptec) SCSI host adapter driver.
Some configuration
Bob McClure Jr wrote
>On Fri May 26 2006 at 10 30 50PM -0400 John Wirt wrote
>
>
> >Bob McClure Jr wrote
> >
> >
> >
> > >On Fri May 26 2006 at 08 27 16AM -0400 John Wirt wrote
> > >
> > > Hello
Below I describe the antecedents of the problem
1. I properly download the easy ISO images of RH WS4U3 from the security RH
network page
2. I check using md5sum that downloaded images were alrpm -q kernel-headers kernel-ibcs kernel-pcmcia-cs \
kernel-source > /current-kernel-pkgs.txt
cat /current-kernel-pkgs.txt
Result from the above command.
package kernel-headers is not installed
pacI 'm running FC2 on my file server. Every time it has to be
booted (power outage) it does not establish it 's Gateway. the
/etc/ssyconfig/network file has a line that says "GATEWAY
192.168.1.1 " but II have a 2gb stick and i would like to us it to do custom RHEL 4 installs.
The problem is when i use the iso that i have created it doesnt boot at
all I used the mkisofs command and specified the eHi
I am using Red HAT ES 4.0 with Cluster Suite Package Enterprise and the
GFS. It appears that I am constantly connecting and disconnecting to the
SAN Storage. I am using SFNet driver Version 4 Hello all
I 'm using a laptot (Acer aspire 1355LM) which has an internal DVD (pionner). This DVD is broken so I have to do the installation from an external USB NEC DVD-RW.
The installation proceThanks you several of you I have RedHat booting to completion just fine
except for one problem.
Near the end of the boot sequence RedHat apparently tries to connect to
some time standard at 66.18-----BEGIN PGP SIGNED MESSAGE-----
Hash SHA1
Tech Guy wrote
>
> HI
>
> I installed vsftpd on RHAS 3.0 and started the service and when I try to FTP I am getting the following error. I didn 't |
|
|
