 | | | Installation | | having a hard time getting x to run on initial bootup.
defaulting for the time being into run level 3 and having to
run the setup utility BEFORE running startx.
the monitor is viewsonic m70 and thredhat-install-list
I 'd like to upgrade the perl version on RH9. But I can 't find rpm files on ftp.redhat.com. who can give me another site?
Many many thanks.
Yan Peng
yanpeng@(protected)Dear all
I would like to configure at best my partition table for a software "high availability " RAID1 during the RH linux enteprise 4 installation step.
Can you point to me some interesting readingHOW TO DISABLE selinux
in /etc/selinux edit the file called confiig
edit the line to read
SELINUX disabled
I think a reboot would then be in order.
On 7/27/06 tyche <tyche@(protected) > wrote
>
> think the subject header says it all. also how to get grub
to pass init 3 when booting the machine would be helpful as
well.
my experience with fc 5 is bad from the get go. was
installed 2 days aLast night my wife rebooted our web server with the reset button
(don 't ask). It booted ok and appears to be running fine but now I
get this result from "fdisk -l "
Disk /dev/hda 80.0 GB 80060424Hello
When I try to create the key i run this command and it stay in loop
ipsec newhostkey --output /etc/ipsec.secrets --bits 2048
How I can to resolve it ?
Best regards
Faria
<!DOCTYPE HTMLHi I recently reinstalled Fedora (went from 3 to 5) . Rather than doing
an upgrade I did a complete reinstall. Everything went well till I
decided to create a FAT32 partition on my Windows partition Sorry for the novel here but Im very close to getting this working and
I think I crossed some streams some where -) Any insight as to what Im
doing wrong is greatly appreciated. I did search the HHello
I can?t get to create the key in openswan
come this error
ipsec showhostkey no default key in "/etc/ipsec.secrets "
How I can to resolve it ?
OS FC5
best regards
Faria
I tried to install Red Hat Linux 9 on my friends machine and tried all type of ways
Automatic partition
Manual Partition
Under both conditions while it creates the /boot partition it gives followingRecently acquired an el cheapo digital camera made by dgx. When I go to
mass storage mode via usb the hardware browser indicates the presence of
/dev/sda1.
Do any of you have any pointers for viewin
thanks to good-hearted folks here I 've been using the hugemem kernel to
address 8gb of ram on my dual opteron rh es 3.0 servers.
one user has reported that the cpu load balancing seems different oHi Guys
I hope you will reply as soon as possible. I have attached a new hardisk on my comp. New hardisk was initially formated under linux. I am facing problem in mounting this second harddisk
I decided to install RHEL4 update 3 on a Dell PowerEdge 2400 that was
running RH9. This machine has hardware RAID 5. The machine can 't format
the / (root) partition. I 've tried RHEL 4 update 2 and Hi
I can not use my DAT to backup files with tar...
here is my information
OS red hat ES3
[root@(protected) /]# cat /proc/scsi/scsi
Attached devices
Host scsi0 Channel 00 Id 06 Lun 00
Vendor QHi!
I am learning Linux and the best way to learn is to use it. So I
installed Red Hat 9.0 on Dell Dimension Desktop. Connected printer to
LPT1.
Now I have a need to print from Windows XP client hi
I 've got a user running linux w/two nics. he 's interested in attaching
an nfs server to one but not the other. is possible?
adv(thanks)ance
--
* We have a critical system that has Redhat 8.0 installed. The system
uses the older raidtools not mdadm. We are in the process of rebuilding
a new box but in the meantime we have a software raid issuI am attempting to install RHEL 4 on an IBM T60p laptop and I am getting
the following NIC failure error when booting or running ifup
e1000 device eth1 does not seem to be present delaying initialiThanks to the help from this list I now have FC5 running on my HP zv6000
AMD64 laptop. Next trick is to make a backup so I don 't mess things up.
Based on suggestions from the list I 'm trying out g4lrick sez...
> Rick Stevens <rstevens@(protected) >
> >Check for /etc/sysconfig/static-routes. That file is not normally
> >necessary.
nothing there.
> Also look for /etc/sysconfig/network-scriptHi
I have RHEL 3 CD-ROM 's. Can I copy the files from the CD to the harddisk
and create a structure to install linux ? I will have to copy the structure
to the XP partition and boot the CD using agreetings
I 've got a centos web server. is it ok to ask questions here?
this server was working fine in my test area. I moved it to the
production network today changing everything I could findThe error message "There was an error installing [package]. This can
indicate media failure ... " can apparently mean more than one thing. It
can mean what it says typically a problem with the CD drI hope I am sending this to the correct list(or do I need to mail this to the Red Hat RPM list?)
I recently installes FC4. I already have windows xp installed.
My drive configuration on widows is as <html > <div style 'background-color ' > <P >Hello there </P >
<P >I just finsihed installing (tried many times) a RHEL 4 on a poweredge server with 2 identical scsi drives. I configured the drives witHi
I am trying to boot linux from iomega USB drive. Why is the installer
popping up a dialog box showing me a list of drivers to choose from ?
Even my SATA drive was not initially recognizedHi
Is anyone managing to use the cpan command to install perl modules? I 've tried
to do this on 3 different RHEL4 systems and they all fail in the same way. All
the systems are up to date.
To inHi
I am trying to instal RHEL 3 from the hard disk. I have copied the
iso images and all the RPM 's to the
same directory on the hard disk.
When I choose this directory it fails to find it. It |
|
|
