 | | | Installation | | I have a PC with Fedora Core 5 on it.
I boot from disk 1 ( hda )
hda1 /boot
hda2 /
hda3 swap
I have two additional drives
hdc1 /mnt/raid
hdc2 /mnt/raid2
hard drive number 3 crashed.
When tOn Fri September 1 2006 9 08 am karlp@(protected) wrote
> Some time ago there was a note about putting fonts into X for use with both
> the display and OpenOffice.org etc.
>
> I kept the doAs a follow-up to my notes of before I was successful at using G4L (Ghost
For Linux) to create an image file of the drive in my server on a USB hard
drive then restoring that image to another drive On my fedora core 4 system I just found this
> > Other than the fact Linux has a cool name could someone explain why I
> > should use Linux over BSD?
>
> No. That 's it. The cool name that is. Some time ago there was a note about putting fonts into X for use with both
the display and OpenOffice.org etc.
I kept the docs and had used them on a couple FC4 systems and a RH8.0 system
with sucHas anyone been able to get dual displays to work with FC5 ? from my
memory people were not
having a lot of luck. Any pointers etc. would be great to hear about.
using
2.6.17-1.2174_FC5
Thank you.Anyone have a way around it?
<html xmlns o "urn schemas-microsoft-com office office " xmlns w "urn schemas-microsoft-com office word " xmlns "http //www.w3.org/TR/REC-html40 " >
<head >
<META HTTP-EQUIVRecommendations anyone for a VPN server on FC4?
I 'm running RH9 and just hooked my Epson CX-3810 all in one
printer up to a Netgear USB print server - 192.168.1.60
Can 't seem to be able to print to the printer nor can I use the
scanner. I 've read
What is this process/session from the log "secure " on Fedora 5?
Aug 16 04 02 09 servant su pam_unix(su session) session opened for user
beagleindex by (uid 0)
What log is the best place to look
Concerning the timestamp for successful transfers in the wsftp log xferlog.
Where does the timestamp in the log com from?
(i 'm assuming the clock on the receiving server)
Regards
B Stern
_______The [apparent] final issue also deals with email and Thunderbird/Outlook (evil
program by the way. if you don 't beleive me read the config file for
dovecot).
They can 't pickup email at all (one subgreetings
I 've got an interesting problem. I 've got 3 external usb drives all
running thru a usb 2.0 pci card. the first two (sda and sdb) are
roughly the same vintage. the most recent additio[ I replied to this email already but it didn 't work because of my server ]
On Mon August 14 2006 7 12 pm Rick Stevens wrote
> On Mon 2006-08-14 at 14 21 -0600 Karl Pearson wrote
> > On Mon 14I have a problem with my laptop. If I close the lid with AC power
removed the machine goes into some kind of suspension mode and I can 't
pull it out without doing a hard power down. Any ideas how to fHello now to a different problem
I 've shut down internet access to my house except during specific times of the day to cut down on the use by my teenagers. I 'm doing this with my Linksys router. Help
I 'm running RH9 and am having a real problem with my cable modem. It 's a RCA DCM226. Anyway the modem resets itself every few days - and when it does it just goes through the power up cycle Hello Redhat
Any recommendations for log analyzer that can parse sendmail
maillog file into mysql database?
So from mysql I can create any report that i want usually
rejecteMy RH8.0 email/web server crashed. I 've been struggling over the weekend to
get things back up and still some things are hammered.
You can see them by doing mailq -qL and re-process them by doing
for Hello all
I have had sendmail running on my RHEL 3 server for sometime now but we
are very soon going to start pointing all of our servers to our LDAP
server to do authentication.
All user accoun
The normal RHEL4 install has problems with the Nvidia Quadro FX 3450 video
card. I have to do the install in text mode (not graphic) and when I
reboot off install the reboot hangs. Swapping in an NHello
I have two SATA hard disk of 300GB installed on Dell 1600SC with a separate controller card. I am running Redhat Advanced server 4.0 but the issue is Linux is not able to detect those Hard dis
hi everyone
I am using FC4
when I press ctrl+alt+f1 to ctrl+alt+f6 to get into other consoles the screen goes black???
on pressing ctrl+alt+f7 brings the GUI back.
how to get to the other consolI have been trying to get
an install of fedora 5 or RH AS 4 up 3
on a Dell Precision 360 with limited sucess.
I have been able to get thru the install and boot
process by specifying "nodma " but afterIf in the shell location of an account a /dev/null entry is placed.
The account can 't login as there is no shell to login to. Correct?
Can scripts etc. be executed as that account? If so how? On Fri 2006-08-04 at 09 30 -0400 tyche@(protected) wrote
> mobo asrock k7upgrade 600
> video pci radeon 7000 se
>
> stock fc5 x86
>
> attached is config and log files from my machine. is there a woMy son was given a couple of old computers. They are Pentium 266MHz with
32MB of RAM and 2.6GB hard drives. He wants to learn more about
networking and we have some extra LAN cards lying around hereDear All
I m running linux on first hdd (/dev/hda) and windows on (/dev/hdb)
I want to boot windows from grub.conf.
I tried to my best to boot but i failed.
Please send me the correct grub.conf eI need some insight as to what Im doing wrong with the IPW3945 Wifi card
not being found. Im really lost as to what Im doing wrong and yes I have
cponfirmed that the wireless card is enabled in the BIrecently had a friend give me his comp and i tried to install
fc5 x86_64 on it. the first problem i encountered was the
hard drive had (according to anaconda) was that it had more
than 1024 cylind |
|
|
