 | | | Enterprise Linux 3 | | Hi Everyone
We originally thought this was a httpd problem but after more
investigation we have found that it looks to be a hardware problem on our
server running RHEL 3 U3.
What occurs is Hi
The aacraid driver in RHEL3 U4 have problems with RAID arrays that are not
optimal. Read on for a solution and some bits about the performance and
monitoring of Adaptec 2130SLP RAID control
> As the xfs performance comes back about twice the performance of ext3
> for this test I am of the opinion that xfs must be cheating somehow. It
> has always been my opinion that the IO bottlenecHi
I have always run ext3 filesystem with journalling on Redhat AS as it is
the only supported filesystem.
One of my colleagues runs xfs though and on comparable hardware
configs he gets twIt appears redhat has removed the php-snmp packages from the RHEL
distribution. Is there any good reason for this?
--
Taroon-list mailing list
Taroon-list@(protected)
http //www.redhat.com/mailmOn Thu Jan 20 2005 at 12 26 39PM -0500 nathan r. hruby wrote
> On Thu 20 Jan 2005 Ed Wilts wrote
>
> >On Thu Jan 20 2005 at 05 55 04PM +0100 nodata wrote
> > >I agree with most of your hi
i just want to know if someone had the same behavior that i 'm having when compiling
courier-authlib making the rpm from tarball.
i am running the rpmbuild --ta courier-authlib-0.53.tar.bz2 On Thu 20 Jan 2005 Ed Wilts wrote
> On Thu Jan 20 2005 at 05 55 04PM +0100 nodata wrote
> > I agree with most of your points but it would be unfair not to mention
> > that ProFTPd seems to On Thu Jan 20 2005 at 05 55 04PM +0100 nodata wrote
> I agree with most of your points but it would be unfair not to mention
> that ProFTPd seems to be full of holes.
What data do you have t
Greetings everyone.....
I 've been asked to convert a HP DL320 G2 from Windows to Linux. Linux
doesn 't see the virtual array point that I normally see when dealing with
SCSI array controllers. Hi
I have come across a problem trying to print from Evolution via CUPS to
a Postscript printer.
The print job starts spooling to the printer - you can see the data
light flashing but the spoI 'm moving to vsftpd from wu-ftpd while moving our ftp server to
RHEL3. I 'm having a bit of trouble figuring out how (or if I even
can) to configure something that used to work under wu.
I have I have a RHEL3 box that cannot resolve DNS names anymore. The
/etc/resolv.conf is the same as my other working box.
I tried switching from static to dhcp. I was able to get an ip address
but cOK I 'll smack myself <smack > <smack > <smack >
seconds after hitting send I find the following link
http //www.linuxforums.org/forum/post-143681.html
Which says
#Hi Is not necessary recompileHas anyone had luck finding an rpm for the ipw2100 (Centrino mobile
technology) module for RHEL?
I found them for FedoraCore RH8 and RH9.
I have downloaded the source for 1.0.0 (versioDue to our network architecture we use a Firewall to serve as a smart
mail relay for all Linux Servers.
I have had continued issues getting it to work properly.
The issue appears to be that the I have installed RH E WS 3.0 U3 on the following boxs
Dell Optiplex GX280 Tower
Dell Optiplex GX280 Low profile
On the Tower version. The integrated graphics card is recognised and
can be Anybody know when this product will be released?
Thanks
Brent
--
Taroon-list mailing list
Taroon-list@(protected)
http //www.redhat.com/mailman/listinfo/taroon-list
I 'm looking for an open source project that will do roughly the
equivalent of HP 's Storage Area Manager (OVSAM). We 've found OVSAM to
be very limiting and either need to get HP to throw some develoHi
Earlier in the mailing lists I found some discussions on how to use up2date
with the right rhn channel.
(Bought ES subscription accidentally installed AS )
I want to switch from AS to ES Hi
I am trying to create a floppy based kickstart install for a RHEL 3 AS U2 EM64T machine. I understand that I first need to create the boot disk (then copy the ks.cfg file to the floppy) but I
Any one know if EMC 's Powerpath & Cluster Manager play well together?
Are they certified? If so are there any specific Rev 's to be concerned
about?
Thanks
Mike
--
Taroon-list mailing
My last question of the day.
All of my kernel recompilation exercises today were for the purpose of
solving a
problem.
I have external storage connected via Qlogic 2300 fibrechannel.
Is there anything in particular that needs to be done in order for the
"LABEL / " boot options to work with a custom kernel?
I 've built and installed a custom kernel and from what I can see all looDear all
I have experience a porblem when i setup RHEL 3 WS(update 4) as NFS client and mount solaris 8 NFS server. When i cd to the mouunt directory and ls the contents it hangs for a while.
Hello
I 've been bouncing this issue around for three days now and I 've seen
many people with similar issues but no solutions that worked.
Problem I cant compile the kernel using the sHi Fred
For Red Hat Enterprise Linux WS (v. 3 for x86) system
dhcp rpm package is available for download from Red
Hat Network (RHN).
On Red Hat Network (RHN) dhcp-3.0pl2-6.14.1 1 rpm
packageHi
I 'm setting up a NTP server which sync its time with
some public NTP servers.
According to publich NTP server list those servers
seem to use DNS names as public name which may resolve
to
Hi everybody
We 're using a DELL PE 2850 with two RAID 1 arrays (and 1 Hotspare disk)
and we 're currently experiencing extremely high iowaits during i/o
operations.
This server is used to manaThe Weather Report 2.2.2 applet comes pre-configured for Pittsburgh which
is fine for RHEL users who live there. But when I click on its
Preferences it crashes with "The Weather Report applet appe |
|
|
