 | | | Enterprise Linux 3 | | Hi All
I run Linux on an old box with very little memory
# /sbin/fdisk -l
Disk /dev/hda 3228 MB 3228696576 bytes
128 heads 63 sectors/track 782 cylinders
Units cylinders of 8064 *
Hi Guys
Just wanted to get some feedback on experience with some of the
more common HBAs.
I 've been using Emulex 9002(DC)-E 's for our SANs but notice
lots of folks using qlogic cards I thought some of the folks here may be interested in the current legal
goings-on between Red Hat and CentOS (an RHEL Taroon "recompile ")
http //www.centos.org/modules/news/article.php?storyid 66When compiling balsa-2.2.6-1 from
http //balsa.gnome.org/download.html#gnome26
using "rpmbuild --rebuild ... " I get the following error
auth-gssapi.c 198 `GSS_C_NT_HOSTBASED_SERVICE
Hi
We are working on iSCSI and Fibre channel target for Linux based servers and
we noticed that the 3ware driver performance has dropped down in 2.4.21-27
Update 6 compared to Suse Linux SLES8. Does anyone know if there exists RHEL 3 compatible gnumeric package
somewhere? I have tried rebuilding the Fedora 1/2/3 gnumeric packages
on RHEL 3 but in all three cases they seem to depend on new Our dept runs approximately 100 copies of Redhat WS.
Even though WS is described as a desktop version of the OS
we also use it to run our servers since none of them need
the extra pac
I 'm curious to see if folks are actually installing the HP
SupportPaqs that supply alternate cciss drivers as well as the bcm5700
driver replacement for tg3.
Do people stick with the stocHello!
I have this scenario
Two IBM xSeries servers each with IBM ServeRAID 6M controller. Each
controller is connected to the EXP400 that features two SCSI connectors.
The ServeRAID 6M sHi
anybody has experience with Samba-3.0.11? This release should have fixed
some troubles namely high load caused by nmbd
https //bugzilla.samba.org/show_bug.cgi?id 1250
Some annoying cupin debian there is a file called /etc/defaultdomain. In Taroon which
file is equivalent to this one?
Thanks.
--
Taroon-list mailing list
Taroon-list@(protected)
http //www.redhat.com/mailmaWe 're getting a load of new equipment here in the next few weeks which I
do not have any direct experience loading/running with RHEL. I was
hoping that there might be a few kind souls out there who I 'm running RHEL3 WS u4 (installed as u4 rather than an upgrade from < u3)
on a Dell Optiplex GX280.
I recently upgraded from a 17 " monitor to a Dell 2001FP LCD. In addition
to this I also go > > That 's odd. Our experience has been exactly the opposite.
> > Nothing but
> > trouble from the Proliant 's and the Poweredges came up and ran.
> Really??? That 's good - I am glad you arHI All!
I 'd like to move from ES 3 to Fedora. Is there a
suggested way of doing this besides wiping the drive
and starting over? Or can I 'upgrade ' the ES 3 to
Fedora and keep my settings and coEnvironment DL740 with all RH updates applied.
Command
snmpwalk -c mycommunity -v 1 localhost
stops after some output these are last lines
HOST-RESOURCES-MIB hrStorageAllocationFailu
Hi
The last RHEL3 update pack contains a mailman package. I 'm using that
on a new mailserver and found a little problem with cron when starting/
stopping the mailman service. RedHat moves the Hi all
RH ES3 Update 4 box with the 'unsupported ' modules added.. Controller
is fine however the plugged in powered up disks are not seen.
#cat /proc/scsi/sbp2_0/1
Host scsi1 -----BEGIN PGP SIGNED MESSAGE-----
Hash SHA1
Tom 'spot ' Callaway <tcallawa@(protected) > wrote
>It is worth noting that as of this very second Oracle RAC on OCFS (or
>Raw partition) is the onHi everyone
I know RHEL has some functionnaly letting install a system remotely.
Remote media (HTTP/FTP/NFS) is well supported and kickstart allows to
automate a good part of the installation How can I make reverse lookups look at the hosts file. It seems that
all reverse lookups go directly to dns even though I have resolution set
to hosts files dns.
Jon
--
Taroon-list mailing Hi all
I am getting literally thousands of break-in attempts to ssh possibly
other services (i.e. they attempt different common usernames and
passwords)
how do I block these? I only need sQuick question for the AMD64 folk on the list
How does one pull down the i386/i686 version of a package (i.e. glibc) when
the x86_64 version is already installed?
I had hoped something like 'We have a strange problem with a new server we 've got running RHEL3 U4
(not-preinstalled). The server is extremely slow to login because of
long pauses between entering the username and the passwoI am in the process of testing CUPS for a print gateway project I am
involved with and ran into an issue. First let me start by
saying the problem does not exist on Fedora core 3 so I assume it
Around Fri Feb 04 2005 at 04 34 55PM -0500 cyclops wrote
> We just bought a IBM Intelliworkstation with OS as Red Hat Enterprise
> Linux WS (v. 3 for AMD64/Intel EM64T).
>
>
> However We just bought a IBM Intelliworkstation with OS as Red Hat Enterprise
Linux WS (v. 3 for AMD64/Intel EM64T).
I am wondering how to manage/upgrade packages in this system.
By looking at the admiMark J Cox wrote
> The Red Hat Security Team have seen a small number of reports of
> compromises having a similar pattern since the start of the year. In
> all the cases so far the fault hadTom Sightler wrote
>
> If you have to specify the context in windows then you probably must do
> so for Linux as well. It 's been a very long time since I 've done this
> but I think you can use Hello
We have 16 linux and 6 HP-UX servers generating thousands of lines
syslog messages per a day.
I want to collect all syslog messages from these servers to a central
syslog server and s |
|
|
