 | | | Enterprise Linux 3 | | I am trying to install rsh-server on Red Hat AS 3.0 server and keep
getting the following error.
warning rsh-server-0.17-28.i386.rpm V3 DSA signature NOKEY key ID 30c9ecf8
error Failed depWhen I RPM install rsh-server on my RH AS3.0 machine the rpm command
yields the following warning.
warning rsh-server-0.17-28.i386.rpm V3 DSA signature NOKEY key ID 30c9ecf8
What does thisLast week I wrote
>I have a full /var/spool/clientmqueue with files going back 5 days. They just
>sit there with multiple sendmail processes running showing 'client DATA
>status '. Like Is anyone using yum with ES 3.0? I have various home-grown
applications and figure I 'll use up2date for my redhat updates but
yum for my internal RPMS. I had trouble on ES 3 update 3 getting the
I just built two dual Opteron machines for a small cluster with 4 GB of ram
each a dedicated GB network layer 3 switch and about a TB of disk.
I put RHEL3 update 2 WS on the compute node and EHi.. I just installed sendmail in RH Ent and I had
ensure that the sendmail program is running and
outgoing DNS and SMTP is permit to internet.
But I tried to sendmail outgoing mail to my yahooA little while back someone brought up Monitoring Software for Linux.
Well I had not heard of Nagios and was planning on installing Zabbix and
decided to compare both of them.
So that 's what I dDid anyone run into any problems with NFSv3 over TCP on RHEL3? NFS
using UDP is still default. We 're often getting lots of "NFS server
not responding NFS server Ok " messages on some of our workstatNow I know this has been asked before but I 'm all out of ideas and I can 't
seem to find anything on Google that helps me (unless I 'm very dense and
missing it).
I have a Dell PowerEdge 1750 witOn Fri Mar 04 2005 at 08 23 57AM +1000 Michael Kearey wrote
> > # up2date --dry-run --nox
> > [...]
> > Unresolvable chain of dependencies
> > rpm-libs 4.2.3-13 On Wed 2005-03-02 at 23 23 Robert Sturrock wrote
> Hello all.
>
> I noticed this question was asked recently but the solution did not
> assist in my case. I have a new RHEL-3 (AMD64) machineI updated our RHEL 3.0 AS sytem
from 2.4.21-20 to 2.4.21-20ELsmp to 2.4.21-27.02ELsmp
and
nfs-utils to 1.0.6-33EL.
I started getting these messages intermittently afterwards
rpc.statd ReceivI stupidly let some of my entitlements expire and I just renewed them
but the RHN webapp doesn 't show the renewals as available entitlements
now. Does anyone know how long I 'm going to have to waHello all.
I noticed this question was asked recently but the solution did not
assist in my case. I have a new RHEL-3 (AMD64) machine which has
recently been setup but everytime I try to run uI have a full /var/spool/clientmqueue with files going back 5 days. They just
sit there with multiple sendmail processes running showing 'client DATA
status '. Like this
root 2729 Does anyone know the proper way to configure the yp.conf file to provide the ability for the host to fail to a backup NIS server should the currently bound server go down?
example of yp.conf
domHas anyone seen this before? I 've attached it to (and it seems
similar to) the bug located here
https //bugzilla.redhat.com/beta/show_bug.cgi?id 144059
I 'm running ES 3 update 3 that was up2dWe are setting up openAIS to do cluster monitoring for a set of HP Langleys
running Red Hat Enterprise Linux AS release 3 (Taroon Update 3).
During our testing we have encountered a multicast issuI 'm setting up sudo for our environment and need to prevent users from using
less to open vi or using vi to start a bash shell etc.
I 've been told about noexec (see links) but am concerned that tBecause then it is called "CentOS " -) Oh... and they provide yum
mirrors already. If it isn 't built by Red Hat it isn 't *supported* by
Red Hat.
Joshua
On Fri Feb 25 2005 at 01 36 52PM -
Has anyone had any trouble trying to kickstart DL360G4 's
(EM64T)?
Basically when I try to kickstart a 32-bit version I either
get "pump told us No DHCP reply received " or I get "nfs sourDoes anyone know when 3.0.11 will be released in up2date for AS 3?
I 'm having trouble with print queues not dumping and I 've found the
bug is fixed in version 3.0.11 of samba. However up2date doesI just loaded EL3U3 on a machine I had previously run 7.3 on.
I also just installed a gigabit nic in it RTL-8169.
After rebooting the nic isn 't automatically installed for me and I 've
never h[On the assumption there aren 't many people on the nahant list yet and
with apologies to those who are and get this twice. I think this may be
of interest to those people contemplating a move
Solaris ' ptree can take a PID as an argument and recurse up the
PID chain. If you pass it the PID of a command invoked by a script or
cron or any multi-level forking scenario it 'll build theRed Hat Enterprise Linux 4 is now available via Red Hat Network to all
current Red Hat Enterprise Linux subscribers.
Press release available at
http //www.redhat.com/about/presscenter/2005/preWhen we first started buying RHEL we got RHEL 3 ES Basic x86. When we
got an Opteron system there was no x86_64 Basic edition so we just
stayed with the x86 arch. Around RHEL 3 Update 3 IIRC R
Is it supported ?
I tried to search Redhat website and list archive but could not find anything
on this. Sorry if this has been asked several times.
RDB
--
Reuben D. Budiardja
Dept. PhysiHi
in addition to the Oracle question
does anybody know if Domino 7 will run on EL4?
I have read notes.net the reason El3 is not supported is the lack of
Epoll...?! is this in EL4?
ThankHey all
Anybody know when Oracle will be supporting EL4 ?
-n.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN " >
<HTML >
<HEAD >
<META HTTP-EQUIV "Content-Type " CONTENT "te |
|
|
