 | | | Enterprise Linux 3 | | I 've two NICs bonded together as bond0. I can do traceroutes using
bond0 as the interface. But when I configure a virtual IP over bond0
(virtual i/f bond0 0) I cannot do traceroutes using bond0 0
I will be out of the office starting 13/08/2005 and will not return until
23/08/2005.
I will respond to your message when I return.
For urgent matters please contact hdevogelaere@(protected)Hello
I have a RHEL v3 system with a 3ware 9xxx controller. Currently there
are two RAID 5 arrays attached to this controller which gives me two 2TB
disks (/dev/sda and /dev/sdb). The OS is instI have a data dvd+rw I created at home using k3b on Fedora Core 4. I 'm
trying to read it on my RHEL 3 WS workstation here at work. If I try to
mount it with "-t udf " the mount command errors out withHas anybody noticed that the mailing list is replacing the original
"From " with taroon-list@(protected) ?
-Vinodh
--
Vinodh Cuppu
IC Design Engineer
Pulse~LINK Inc. <http //www.pulselink.net >
(760Hi All
I am currently running RHEL on my desktop primarily because the tools
(EDA) that I use are supported by the vendor only on RHEL (as far as
Linux is concerned).
To satisfy my need to run thHi..I want to configure a slave BIND DNS to
automatically get the master zone abc.com update from
a windows DNS server (172.16.1.42). Below is the my
/etc/named.conf file.
more /etc/named.conf
zon-------- Forwarded Message --------
From taroon-beta-list@(protected)
Reply-To taroon-beta-list@(protected)
To taroon-beta-list@(protected)
Subject Red Hat Enterprise Linux 3 Update 6 *Beta* Availabi------------------------------
Date Wed 10 Aug 2005 10 31 29 -0500 (CDT)
From "Thomas Cameron " <thomas.cameron@(protected) >
Subject Re System not reporting to rhn
To taroon-list@(protected)
MHi
I would like to setup a small lab consisting of 2 RHEL 3.0 running
Redhat cluster suite.
Is it possible to install Redhat Cluster Suite without a separate disk
sub system ?
All I have is the 2 seHi All
Are Exim and Courier available/Supported on RHEL 3?
Cheers
Sun
--
Taroon-list mailing list
Taroon-list@(protected)
http //www.redhat.com/mailman/listinfo/taroon-list
I have a fully patched RHEL3 ES that has stopped reporting to rhn. I
can manually run up2date but the agent/rhnsd does not do the reporting
it had been doing since the original install. There are nHi!
I 'm required to set up a PHP installation with XSLT/Sablotron support on RHEL3.
I downloaded php-4.3.2-11.ent.src.rpm installed it and hacked
php.spec a bit inserting the following
- to the
-----Original Message-----
From taroon-list-bounces@(protected) [mailto taroon-list-bounces@(protected)]
On Behalf Of taroon-list-request@(protected)
Sent 2005??8??6?? 4 32
To taroon-list@(protected)
I am having a problem reliably using USB memory devices under
Red Hat Enterprise Linux WS release 4 (Nahant Update 1)
I see that there a bugzilla report (136467) for this problem under FC3
opI 'm sure you will get better answers than this but my two cents...
Try a simpler set of rules to block those four random addresses
#block anything sourced from aaa.aaa.aaa.aaa
-A INPUT -s aaa.aaa.Hi
since some weeks our database server (redhat taroon + oracle 9i)
suffered from a very bad performance. The load avg climbed sometimes to
80% ( althought I think I 've a powerful machine (HP 3Hi
I 've encountered a strange problem of memory management on taroon so I
need you guys ' help.
on our server we 've got an oracle Release 9.2.0.6.0 installed. Today
when I was checking the memoHi
I 'm trying to setup a CVS server in RH AS 3.
Installing cvs-1.11 package seems to be insufficient (it installs only
client).
Any help? I 'm missing something?
Thanks
Domenico Viggiani
--
Taroon-We have installed our own custom apache RPMs onto a RHEL3 server due to
the fact that Redhat doesn 't provide apache-1.3 which we need for
mod_perl and various modules that go with it. We 've removedI had a similar problem where it hurt my performance that OS grabbed
free memory resources into cache. In my case I made my shared memory
stay resident by the use of the hugetlb_pool. The server nowHello experts
I have one system Running RHEL WS 3 update 5 in Sun
Microsystem Model
W2100z AMD64 16GB of memory 2GB swap file. Them model
is a certified
from redhat
http //bugzilla.redhat.com/hwcertOn Wed 3 Aug 2005 Shaw Marco wrote
> I really don 't understand the whole '3270 emulation ' bit.
> I think I am searching for a telnet program that supports
> 3270...
x3270 works fine. Its sour
I really don 't understand the whole '3270 emulation ' bit. I think I am
searching for a telnet program that supports 3270...
I 'm looking for something hopefully packaged with RedHat (Workstation
3.0Hi..I upgraded my linux kernel to 2.4.21-32.0.1.EL the problem resolved. Now the mounting is
actually done by S88smbmount script with the following entry
mount -t smbfs -o username mcg_iur password We have an SMB Domain with a RHEL3 (fully updated) samba domain
controller. For some reason on our Windows XP clients printers appear as
both 'printername on samba ' and 'printername on 192.168.1.1 '.We have a need correctly do the following. I have been all over the
net and up and down through the various support people. I have it
somewhat operational now but could use some help making it fuI had some problem when hugetlb is actived.
Solved
1. updating to RHEL 3 U3
2. exporting DISABLE_MAP_LOCK 1 (set this so that oracle and the listener
inherit this)
3. Installing the patch 3596858 (avI would suggest posting some vmstat / iostat for the system while under
heavy load.
-----Original Message-----
From taroon-list-bounces@(protected) [mailto taroon-list-bounces@(protected)]
On Behalf Hi.. I have 2 linux servers with samba installed.
Both are configured to mount to separate windows
2000 pro network drives. The proper windows user are
created on both windows PC too
In Linux server |
|
|
