 | | | Enterprise Linux 3 | | I 've been experimenting with scheduling system reboots through RHN. The
interface says that I can schedule a reboot "no sooner than " a given date
and time. However I 'm finding that the machine alSorry moderator please kill the post from wrong address.
Hi
Which version of wine should I be looking for to run on RHEL 3 ws ?
A quick search did not find a RHEL 3 package.
If it 's part of the re
Hi
I am trying to use the kernel bonding feature with two interfaces
on several on our servers and I am having trouble making it work
with the supplied network scripts.
The 'ifup ' s
Few days ago I noticed my AS machine is running on 10 base half when it
was suppose to be 100 full. I tried to force it using mii-tool however it
was still saying 10 half.
I decided to open tI read here
http //www-306.ibm.com/software/data/db2/linux/validate/rhel3faq.html that
Red Hat and IBM were working together to provide support for DB2 on RHEL 3.
It says that a fix in Dec 2003 wasOn Mon 2004-01-19 at 10 03 D Canfield wrote
> We spent an entire afternoon on this one shortly after putting RHEL 3
> into production... we couldn 't believe that both the Samba team and Red
On Mon 2004-01-19 at 12 13 Dirk Gfroerer wrote
> yes I can confirm this (with VMware workstation 4.0.5). After about
> 10 to 30 minutes the vmware-vmx process starts to consume my entire
> CPU.
Guy Megouri Cohen said
> I have seen it as well on DL380G3.
>
> It happened on boot time when the server starts from PXE.
> The problem causes the PXE process to hang.
>
> Guy
I might try I 've installed ES on HP DL380 G3 and was very surprised as i saw four
CPU 's listed in top
12 47 08 up 56 min 1 user load average 0.00 0.00 0.00
43 processes 42 sleeping 1 running 0I 'm running RHEL3WS on a laptop since moving to the kernel-2.4.21-9.EL
I 've found that running VMware Workstation 4.0.5 (or 4.5-beta-rc1) has
become near to impossible. (The vmware-config.pl has be
I 'm trying to track down why the comps package is not being updated here.
# rpm -q comps
comps-3ws-0.20031007
The errata page has a comps-3WS-0.20040113.i386.rpm but my up2date is not
seeiI use RHEL3 on a system with a fire-write external Maxtor drive as
backup disk.
To support this I need the kernel modules ohci1394 and ieee1394
and these are provided by the rpm kernel-smp-unsu
Is there any chance we will see updates CDs suitable for *update* already installed RHEL box and not only for fresh install?
I mean this limitation "The use of Anaconda to upgrade to Update 3 iRed Hat is pleased to announce the availability of Update 1
for the Red Hat Enterprise Linux 3 family of products
including
- Red Hat Enterprise Linux AS (v. 3 for x86)
- Red Hat Enterprise LI was looking at the iso checksums for update1 it appears only disk one
has a different checksum compared to the old media.. So I am thinking I
only need to download disk 1 and replace my existinHi
I see that update 1 for RHEL ES v3 is out but I can 't find ISO on RHN
for it.
Will it be available?
Regards
Igor
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN " >
<HTI went to do an up2date this morning on two RHEL3 servers (s390-linux) and
both failed out with the following erorr
Testing package set / solving RPM inter-dependencies...
There was a package dWhere can I find information for the RHEL3 compatible network power switches
I can use with Red Hat 's Cluster Suite? I have checked
http //hardware.redhat.com/hcl and I cannot find any info. What On Fri 2004-01-16 at 15 35 Zate wrote
> I have a pair of AS 2.1 boxes that seem to set the MAC Address on the
> internal dual bcm5700 cards to all zeros occasionally. Anyone seen
> anything likSince upgrading from RH 7.3 to RHEL 3 MySQL has begun to give us major
trouble. Usage that previously caused a load of 0.2 is now exceeding
2.0. MySQL is getting so bogged down that I can barelHello...
In RHSA-2004 015 the httpd version/release is the same as what is in the
Taroon Update 1 Beta.
Errata/RPMS/httpd-2.0.46-26.ent.i386.rpm
Beta/RPMS/httpd-2.0.46-26.ent.i386.rpm
The Folks
As an alternative to RHEL 3 ES -
It seems to be possible to purchase RHEL 3 WS or Red Hat Professional Workstation - and then build and install the source code for
the extra packages froClifford Perry wrote
> This is not obvious - I did it once then forgot what I did and then
> rediscovered this again )
>
> 1 - login to RHN web interface
> 2 - Go to the Systems/server listiThis is frustrating...
NTP I couldn 't get it working with 7.2 with various kernels and various NTP packages and now still can 't get it working with 2.1AS...
ipchains allows all eth0 traffic t
Does anyone know why the zisofs-tools are missing from the Taroon
distribution?
jch
--
Taroon-list mailing list
Taroon-list@(protected)
http //www.redhat.com/mailman/listinfo/taroon-listAll--
Forgive this newbie question but what are the minimum system requirements
for running RHEL 3 AS on an Intel X86 machine? That is can I run RHEL 3 AS
on an Intel 700 MhZ pentium III with At 19 52 14/01/2004 -0500 MJang wrote
>www.caosity.org
>http //www2.uibk.ac.at/zid/software/unix/linux/rhel-rebuild-l.html
>http //www.beau.org/~jmorris/linux/whitebox/news.html
>www.taolinux.orFolks
I 'm wondering if there 's any official Red Hat position or comment on the work of these groups
www.caosity.org
http //www2.uibk.ac.at/zid/software/unix/linux/rhel-rebuild-l.html
and whGuys
Im still having problems with this. I found a semi-official BIOS that
'supposed ' to fix loads of issues. Ive (reluctantly) flashed the BIOS but
the problem 's still there. I also downloadedYou can use include in /etc/aliases file.
1. Create a group ( eg. admin )
2. Add user to the group using usermod or GUI Tools ( eg. usermod -G admin
user1 )
3. Create an alias entry with include ( |
|
|
