 | | | Linux | | Hi All
Does anyone here know about Bugzilla and CVS on Red Hat? I 've never used
either but have to install both.
Do they work together somehow or are they totally different pieces of
software?
Sir/Madam
Please help me out.I have Red Hat 8 installed on the Xeon HCL server with 4 SCSI disk each 36 GB with RAID 5(harware) configured.
Two days back RAID degraded then i patchHi
I installed rehdat 4 update5 on HP dc7700. I installed redhat with this
command
Linux pci nomsi nommconf
After installation redhat cannot boot and on display wrote
uncompressing linux.. I have problem with installing Courier Imap . when I try to install courier-imap-pop3-1.5.3-5.i386.rpm but it conflicts Cyrus Sasl and needs courier-imap-common. then I tried to install courier-imap
Hello All
Iam new to Redhat Linux. Can anyone help me in solving the problem
below -
Iam trying to install the DNS Server on RHEL4. I have downloaded the
latest package of BIND-9.4.1-P1 from site. |
|
| Installation | | Dear
Can you Help me in configuring the NTP between two nodes running RHEL_AS_V4_U5 .
I Have two Server (A B) I want server B to take its time from server A only.
Thanks.
<html xmlWhat does the + symbol at the end of the "Blocks " count signify in the output of fdisk -l ?
Many TIA
Nix
<div >What does the + symbol at the end of the "Blocks " count signify in the outpHere 's the source of a locking program you can use to lock files for
the NFS test. Build by saving the source somewhere and
gcc -o setalock setalock.c
Running it as
./setalock -w /path/to/test/fOn Mon 2007-11-05 at 13 51 +0800 Jing CDL Sun wrote
> Rick
>
> Thank you for the confirm.
>
> We will use RHEL5 or RHEL5.1 to do this probing work just as you
> said once we can actually get tIs there a command I can use to manually lock a file?
My goal is to test NFS file locking with groups greater than 16.
<html xmlns v "urn schemas-microsoft-com vml " xmlns o "urn schemas-microsof |
|
| Enterprise Linux 3 | | I 'm running RHEL3 (2.4.21-47.ELsmp) with Broadcom NIC and BASP bonding
(bcm5700 v8.1.55)
When network traffic is ~12MB/sec ( ~120K packets/sec) CPU system load
is growing up to 50-60%%.
Yes I know Hello
Could anyone can help me out with this problem?
My System Reboot When Running 3D GPL ScreenSaver I 'm using Rehat
Enterprise Linux WS Release 3 ( Taroon Update 6)
Kernel 2.4.21-37.0.1.Elsmp Sys >From time to time I see weird entries into arp table like this
# arp -an
? (.10.10.10) at 00 03 B2 1D 17 13 [ether] on sw0
As you can see the first octet into IP address is missed.
Why?
Thanks
On Fri 2007-11-02 at 12 26 -0300 Ivan Marinkovic wrote
> Yes....with x86 architecture there 's no problem showing the cache
> size but IA64 is different (
Is there an equivalent to "dmidecodeYes....with x86 architecture there 's no problem showing the cache
size but IA64 is different (
Thanks a lot
Ivan Marinkovic
El 02-11-2007 a las 12 20 Andrew Bacchi escribi?
> Hmm mine doe |
|
| Red Hat Linux 9 | | I 'm running a pretty standard RHL9 with a 2.4.20-8 kernel that I 've
recompiled to suit my hardware configuration.
I use the Mozilla Web Browser that came in the package - when interrogated
it state Hi
I 'm trying to install RH9 on a Gateway G6-400 but can 't get the install screen up without a driver disk for the Nitro DVD 1.8 graphics card.
Have spent ages trying to find one on the web so First some background info. My earliest experience with Unix was back in
the early 1980s with System III (a version which had heavy influences from
Version 7 & BSD 4.1). On January 1st this year
Hi
At a recent startup I got the message "unable to stat /dev/cdrom " (I think) - the cdrom link in /dev pointing to /dev/scd0 had been deleted - don 't know how.
A Web search produced no usefhi every body
I 'm beginner in using Linux please can you help on Linux loading in my machine
best wishes.
|
|
| Red Hat Linux 7.2 | |
----- Original message -----
From enigma-list-request@(protected)
To enigma-list@(protected)
Date Mon 18 Dec 2006 12 00 07 -0500 (EST)
Subject enigma-list Digest Vol 9 Issue 2
Send enigma-lisI am running RH 7.xxx on a box that host several Smartlist mail lists
It is also running sendmail 8.11 Can I just run an RPM to upgrade this is 8.13 with out too much of a problem
I desire to useHi
I have installed R.H. 7.2 on 486 100Mhz ( no pentium ).
It 's ok but when GNOME run i have the error in object.
... archeology !!!
Francesco Loiacono
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0I am using this configure command
./configure --prefix /engr/apache
--enable-module proxy --enable-shared proxy --enable-module define
--enable-shared define --enable-module cern_meta
--enable-sharedHello
I wanted to know the ways in which I can compile linux kernel 2.6 on
redhat 7.0. I tried to compile the kernel and load essential packages
but I am getting lots of errors while compiling the k |
|
| Red Hat Linux 7.3 | | Hi
Is there a way to automatically execute a command when a user logs on to
a linux box.
Rgds.
Harry.
http //www.bbc.co.uk/
This e-mail (and any attachments) is confidential and may contain personhello newbie needs help
I have Redhat 7.3 installed and would like to get the latest version of mysql
running
I have downloaded MySQL-server-5.1.11-0.i386.rpm to /root folder
In a shell I have run rHi all
Trying to upgrade version 2.5 nmap to 4.11.1.src.rpm
I run the following following command
Rpm -Uvh rpm package which results in the follwing
1 nmap #########################Hi all
Using small home network with 3 linux pc 's...trying the wall command to
send
1) Broadcast mesaages
2) message to a specific pc....I type wall then message I press
enter...it says message senHi All
Trying to clear disc space on my linux 5.2 box......is there a command
that will help me delete old files the system doesn 't use? looking for
a coomand which will tell me how old a file is or |
|
|
