Java Mailing List Archive

http://www.redhatconfig.com/

Home » Gentoo Linux »

Re: [gentoo-user] pptp client under nat

Vladimir Rusinov

2008-05-02

Replies:

Author LoginPost Reply
On Fri, May 2, 2008 at 12:22 PM, Vladimir Rusinov
<vladimir@(protected):

> Sorry, kernel module was not loaded and mppe was not enabled in options.pptp.
> Thank you.

Another problem: the tunnel is now up, but I'm not able to ping or telnet router

ppp0    Link encap:Point-to-Point Protocol
      inet addr:192.168.5.253 P-t-P:192.168.5.1 Mask:255.255.255.255
      UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1448 Metric:1
      RX packets:9 errors:0 dropped:0 overruns:0 frame:0
      TX packets:149 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:3
      RX bytes:90 (90.0 b) TX bytes:11064 (10.8 Kb)

# route
Kernel IP routing table
Destination   Gateway      Genmask      Flags Metric Ref   Use Iface
192.168.5.1   *          255.255.255.255 UH   0    0     0 ppp0
172.16.85.0   *          255.255.255.0  U   0    0     0 vmnet1
192.168.194.0  *          255.255.255.0  U   0    0     0 vmnet8
192.168.1.0   *          255.255.255.0  U   0    0     0 eth0
loopback     *          255.0.0.0     U   0    0     0 lo
default      192.168.1.1     0.0.0.0      UG   0    0     0 eth0

;(

--
Vladimir Rusinov
Voronezh, Russia
--
gentoo-user@(protected)

©2008 redhatconfig.com - Jax Systems, LLC, U.S.A.