 | | | I-node table overflow | I-node table overflow 2002-08-27 - By Jari Laaksonen
Back
Witch kernel parameter on Linux (redhat 7.3) ? I used
Patrol Console for monitorin our system and patrol claim
that our machine has 100% of kernel-inodes used ....
"KERINodeUsedPercent
his parameter displays the percentage of kernel I-node
slots that are used. An I-node is normally used to store
active files, directories, and file information. It is
also used for other services such as pipes, clone drivers,
and on some systems ' semaphores.
If the I-node table is full, the services that required
I-node slots are refused by the system. You may get the
message "I-node table overflow ". Abnormal results and
missing data files may result. "
Any glue, witch kernel parameter I have increase ?
Best regards,
Jopi
On Tue, 27 Aug 2002 03:53:04 -0400 (EDT)
valhalla-list-request@(protected) wrote:
>*This message was transferred with a trial version of
>CommuniGate(tm) Pro*
>Send Valhalla-list mailing list submissions to
> valhalla-list@(protected)
>
>To subscribe or unsubscribe via the World Wide Web, visit
> https://listman.redhat.com/mailman/listinfo/valhalla-list
>or, via email, send a message with subject or body 'help '
>to
> valhalla-list-request@(protected)
>
>You can reach the person managing the list at
> valhalla-list-admin@(protected)
>
>When replying, please edit your Subject line so it is
>more specific
>than "Re: Contents of Valhalla-list digest... "
>
>
>Today 's Topics:
>
> 1. Re: ISDN4Linux in the kernel
>(=?gb2312?q?Tomhanks?=)
> 2. Re: Can 't start X or run Xconfigurator (Mike)
> 3. Re: SMP Problems (Chris Kloiber)
> 4. Re: Can 't start X or run Xconfigurator (Oh Yong
>Sing)
> 5. Re: Can 't start X or run Xconfigurator (Mike)
> 6. Re: Can 't start X or run Xconfigurator (Oh Yong
>Sing)
> 7. (no subject) (=?gb2312?q?Tomhanks?=)
> 8. Xine problem! (=?gb2312?q?Tomhanks?=)
> 9. RE: Xine problem! (Wolfgang Gill)
> 10. Re: Can 't start X or run Xconfigurator (Oh Yong
>Sing)
>
>--__--__--
>
>Message: 1
>Date: Tue, 27 Aug 2002 11:29:59 +0800 (CST)
>From: =?gb2312?q?Tomhanks?= <xihahe@(protected) >
>Subject: Re: ISDN4Linux in the kernel
>To: valhalla-list@(protected)
>Reply-To: valhalla-list@(protected)
>
>--0-1520634327-1030418999=:45806
>Content-Type: text/plain; charset=gb2312
>Content-Transfer-Encoding: 8bit
>
>well, the isdn4linxu has problem in red hat 7.3, you have
>to use third software or you can config by yourself. i
>have the same problem, if there is someone know the
>solution, pls let me know
>
>
>
>
>-- ---- ---- ---- ---- ---- -----
>Do You Yahoo!?
>�Ż��������ʵ���,�����ܱ����ֵ���!
>--0-1520634327-1030418999=:45806
>Content-Type: text/html; charset=gb2312
>Content-Transfer-Encoding: 8bit
>
>well, the isdn4linxu has problem in red hat 7.3, you have
>to use third software or you can config by yourself. i
>have the same problem, if there is someone know the
>solution, pls let me know <BR > <BR > <p > <br > <hr size=1 > <b >Do
>You Yahoo!? </b > <br >
> <a
>href= "
http://rd.yahoo.com/mail_cn/tag/?http://cn.ent.yahoo.com/newsletter/index.html
" >�Ż��������ʵ���,�����ܱ����ֵ���! </a >
>--0-1520634327-1030418999=:45806--
>
>
>
>
>--__--__--
>
>Message: 2
>Subject: Re: Can 't start X or run Xconfigurator
>From: Mike <massey@(protected) >
>To: valhalla-list@(protected)
>Date: 26 Aug 2002 22:08:32 -0600
>Reply-To: valhalla-list@(protected)
>
>
>On a guess
>Grab another keyboard.
> > Parse error on line 102 of section Keyboard in file
>/etc/X11/XF86Config
>
>Suggests the one you have is not working or not supported
>somehow. Maybe
>pizza crumbs <G >
>
>M;)
>
>
>
>On Mon, 2002-08-26 at 21:30, Oh Yong Sing wrote:
> > I installed Redhat Linux 7.3 on a server, and I had
> >chosen to install GNOME and KDE as well. I had
> > also chosen GNOME to be the default desktop.
> >
> > When the install was complete and the server rebooted, I
> >was brought to the shell prompt instead
> > of a graphical login screen. After logging in as root,
> >and entering "startx ", the following
> > message was displayed:
> >
> > ----
> > Parse warning on line 102 of section Keyboard in file
> >/etc/X11/XF86Config
> > Ignoring obsolete keyword "LeftAlt ".
> > Parse error on line 102 of section Keyboard in file
> >/etc/X11/XF86Config
> > "Meta " is not a valid keyword in this section.
> > (EE) Problem parsing the config file
> > (EE) Error from xf86HandleConfigFile()
> >
> > Fatal server error:
> > no screens found
> >
> > When reporting a problem related to a server crash,
> >please send the full server output, not just
> > the last messages.
> > This can be found in the log file
> > "/var/log/XFree86.0.log ".
> > Please report problem to xfree86@(protected)
> >
> > XIO: fatal IO error 104 (Connection reset by peer) on X
> >server ":0.0 " after 0 requests (0 known
> > processed) with 0 events remaining.
> > ----
> >
> > I tried to use Xconfigurator. Once inside the program, I
> >hit enter on the "OK " button to proceed.
> > The program exited with the words "Segmentation fault ",
> >and I was back at the shell prompt.
> >
> > What is wrong and what can I do? Thanks in advance.
> >
> > Yong Sing
> >
> > __ ____ ____ ____ ____ ____ ____ ____ ____ ____ __
> > Do You Yahoo!?
> > Yahoo! Finance - Get real-time stock quotes
> >
http://finance.yahoo.com
> >
> >
> >
> > __ ____ ____ ____ ____ ____ ____ ____ ____ ____
> > Valhalla-list mailing list
> > Valhalla-list@(protected)
> > https://listman.redhat.com/mailman/listinfo/valhalla-list
> >
>
>
>
>
>
>--__--__--
>
>Message: 3
>Subject: Re: SMP Problems
>From: Chris Kloiber <ckloiber@(protected) >
>To: valhalla-list@(protected)
>Date: 27 Aug 2002 00:10:02 -0400
>Reply-To: valhalla-list@(protected)
>
>Should be on one of the binary installation cd 's, or you
>can try:
>
># up2date kernel-summit
>
>If you just enabled hyperthreading, your machine is
>seeing 2 real
>processors. Did you install any of these processors
>yourself, and did
>you install the voltage regulator modules for them as
>well? You might
>try calling 1(800)IBM-SERV and let them have a look at
>it. Their
>technicians should be fairly familiar with linux. You
>might also ask if
>your firmware and/or cpu microcode is up to date. I
>remember IBM-SERV
>came out and updated ours once.
>
>On Mon, 2002-08-26 at 23:20, Sean Lutner wrote:
> > Currently cat /proc/cpuinfo shows 4 CPUs, because I
> >enabled hyper
> > threading in the BIOS. I know that hyper threading
> >causes machines to
> > see twice the number of CPUs it has so I don 't think
> >that the machine is
> > seeing 4 CPUs.
> >
> > Where can I find the -summit code?
>
>--
>Chris Kloiber
>
>
>
>
>--__--__--
>
>Message: 4
>Date: Mon, 26 Aug 2002 22:28:21 -0700 (PDT)
>From: Oh Yong Sing <ohyongsing@(protected) >
>Subject: Re: Can 't start X or run Xconfigurator
>To: valhalla-list@(protected)
>Reply-To: valhalla-list@(protected)
>
>I think I 've selected a 105-key keyboard (which was
>highlighted for me) during the setup. The
>keyboard actually have 104 keys, with 3 of them Windows
>specific (for activating the Windows Start
>menu). I have changed this keyboard with a 101-key one,
>but X still won 't start (same error
>message). Is there any way to configure the keyboard from
>the shell prompt?
>
>If I need to do a re-installation, what monitor and
>keyboard type should I choose so that it would
>work with all monitors and keyboards?
>
>Thanks for your help.
>
>--- Mike <massey@(protected) > wrote:
> >
> > On a guess
> > Grab another keyboard.
> > > Parse error on line 102 of section Keyboard in file
> > /etc/X11/XF86Config
> >
> > Suggests the one you have is not working or not
> >supported somehow. Maybe
> > pizza crumbs <G >
> >
> > M;)
> >
> >
> >
> > On Mon, 2002-08-26 at 21:30, Oh Yong Sing wrote:
> > > I installed Redhat Linux 7.3 on a server, and I had
> >chosen to install GNOME and KDE as well. I
> > had
> > > also chosen GNOME to be the default desktop.
> > >
> > > When the install was complete and the server rebooted,
> >I was brought to the shell prompt
> > instead
> > > of a graphical login screen. After logging in as root,
> >and entering "startx ", the following
> > > message was displayed:
> > >
> > > ----
> > > Parse warning on line 102 of section Keyboard in file
> >/etc/X11/XF86Config
> > > Ignoring obsolete keyword "LeftAlt ".
> > > Parse error on line 102 of section Keyboard in file
> >/etc/X11/XF86Config
> > > "Meta " is not a valid keyword in this section.
> > > (EE) Problem parsing the config file
> > > (EE) Error from xf86HandleConfigFile()
> > >
> > > Fatal server error:
> > > no screens found
> > >
> > > When reporting a problem related to a server crash,
> >please send the full server output, not
> > just
> > > the last messages.
> > > This can be found in the log file
> > "/var/log/XFree86.0.log ".
> > > Please report problem to xfree86@(protected)
> > >
> > > XIO: fatal IO error 104 (Connection reset by peer) on
> >X server ":0.0 " after 0 requests (0
> > known
> > > processed) with 0 events remaining.
> > > ----
> > >
> > > I tried to use Xconfigurator. Once inside the program,
> >I hit enter on the "OK " button to
> > proceed.
> > > The program exited with the words "Segmentation
> >fault ", and I was back at the shell prompt.
> > >
> > > What is wrong and what can I do? Thanks in advance.
> > >
> > > Yong Sing
>
>
>__ ____ ____ ____ ____ ____ ____ ____ ____ ____ __
>Do You Yahoo!?
>Yahoo! Finance - Get real-time stock quotes
>
http://finance.yahoo.com
>
>
>
>
>--__--__--
>
>Message: 5
>Subject: Re: Can 't start X or run Xconfigurator
>From: Mike <massey@(protected) >
>To: valhalla-list@(protected)
>Date: 27 Aug 2002 00:09:54 -0600
>Reply-To: valhalla-list@(protected)
>
> >From the shell prompt you can use mc or pico and edit the
>etc/X11/XF86Config-4 file. or since your not running do a
>new install
>and choose a Generic keyboard.
>The error was keyboard specific so the monitor should be
>fine.
> >Parse error on line 102 of section Keyboard in file
> >/etc/X11/XF86Config
>
>Let me know how it comes out.
>
>
>CHeers
>
>M;)
>
>On Mon, 2002-08-26 at 23:28, Oh Yong Sing wrote:
> > I think I 've selected a 105-key keyboard (which was
> >highlighted for me) during the setup. The
> > keyboard actually have 104 keys, with 3 of them Windows
> >specific (for activating the Windows Start
> > menu). I have changed this keyboard with a 101-key one,
> >but X still won 't start (same error
> > message). Is there any way to configure the keyboard
> >from the shell prompt?
> >
> > If I need to do a re-installation, what monitor and
> >keyboard type should I choose so that it would
> > work with all monitors and keyboards?
> >
> > Thanks for your help.
> >
> > --- Mike <massey@(protected) > wrote:
> > >
> > > On a guess
> > > Grab another keyboard.
> > > > Parse error on line 102 of section Keyboard in file
> > > /etc/X11/XF86Config
> > >
> > > Suggests the one you have is not working or not
> >supported somehow. Maybe
> > > pizza crumbs <G >
> > >
> > > M;)
> > >
> > >
> > >
> > > On Mon, 2002-08-26 at 21:30, Oh Yong Sing wrote:
> > > > I installed Redhat Linux 7.3 on a server, and I had
> >chosen to install GNOME and KDE as well. I
> > > had
> > > > also chosen GNOME to be the default desktop.
> > > >
> > > > When the install was complete and the server
> >rebooted, I was brought to the shell prompt
> > > instead
> > > > of a graphical login screen. After logging in as
> >root, and entering "startx ", the following
> > > > message was displayed:
> > > >
> > > > ----
> > > > Parse warning on line 102 of section Keyboard in
> >file /etc/X11/XF86Config
> > > > Ignoring obsolete keyword "LeftAlt ".
> > > > Parse error on line 102 of section Keyboard in file
> >/etc/X11/XF86Config
> > > > "Meta " is not a valid keyword in this
> >section.
> > > > (EE) Problem parsing the config file
> > > > (EE) Error from xf86HandleConfigFile()
> > > >
> > > > Fatal server error:
> > > > no screens found
> > > >
> > > > When reporting a problem related to a server crash,
> >please send the full server output, not
> > > just
> > > > the last messages.
> > > > This can be found in the log file
> > "/var/log/XFree86.0.log ".
> > > > Please report problem to xfree86@(protected)
> > > >
> > > > XIO: fatal IO error 104 (Connection reset by peer)
> >on X server ":0.0 " after 0 requests (0
> > > known
> > > > processed) with 0 events remaining.
> > > > ----
> > > >
> > > > I tried to use Xconfigurator. Once inside the
> >program, I hit enter on the "OK " button to
> > > proceed.
> > > > The program exited with the words "Segmentation
> >fault ", and I was back at the shell prompt.
> > > >
> > > > What is wrong and what can I do? Thanks in advance.
> > > >
> > > > Yong Sing
> >
> >
> > __ ____ ____ ____ ____ ____ ____ ____ ____ ____ __
> > Do You Yahoo!?
> > Yahoo! Finance - Get real-time stock quotes
> >
http://finance.yahoo.com
> >
> >
> >
> > __ ____ ____ ____ ____ ____ ____ ____ ____ ____
> > Valhalla-list mailing list
> > Valhalla-list@(protected)
> > https://listman.redhat.com/mailman/listinfo/valhalla-list
> >
>
>
>
>
>
>--__--__--
>
>Message: 6
>Date: Mon, 26 Aug 2002 23:03:21 -0700 (PDT)
>From: Oh Yong Sing <ohyongsing@(protected) >
>Subject: Re: Can 't start X or run Xconfigurator
>To: valhalla-list@(protected)
>Reply-To: valhalla-list@(protected)
>
>I tried to modify the /etc/X11/XF86Config file but was
>unsuccessful. I changed the XkbModel to
> "pc104 " since I have a 104 keys keyboard. Actually the
>parsing error is on the "LeftAlt " line,
>which is before the XkbModel line, so I don 't think that
>changing the latter will help. Perhaps
> "LeftAlt " is really an obsolete keyword?
>
>By the way, during the installtion, when I was asked to
>choose a monitor bit depth and resolution,
>there was a Test button for me to click. When I clicked
>the Test button, the screen just went
>blank for a while, and then back to normal again. The
>resolution doesn 't seem to change when I
>toggle between 640x480 and 800x600. Am I suppose to see
>something when the Test button is clicked?
>
>I guess the only thing for me to do now is to re-install
>the whole thing.
>
>--- Mike <massey@(protected) > wrote:
> > >From the shell prompt you can use mc or pico and edit
> >the
> > etc/X11/XF86Config-4 file. or since your not running do
> >a new install
> > and choose a Generic keyboard.
> > The error was keyboard specific so the monitor should be
> >fine.
> > >Parse error on line 102 of section Keyboard in file
> >/etc/X11/XF86Config
> >
> > Let me know how it comes out.
> >
> >
> > CHeers
> >
> > M;)
> >
> > On Mon, 2002-08-26 at 23:28, Oh Yong Sing wrote:
> > > I think I 've selected a 105-key keyboard (which was
> >highlighted for me) during the setup. The
> > > keyboard actually have 104 keys, with 3 of them
> >Windows specific (for activating the Windows
> > Start
> > > menu). I have changed this keyboard with a 101-key
> >one, but X still won 't start (same error
> > > message). Is there any way to configure the keyboard
> >from the shell prompt?
> > >
> > > If I need to do a re-installation, what monitor and
> >keyboard type should I choose so that it
> > would
> > > work with all monitors and keyboards?
> > >
> > > Thanks for your help.
> > >
> > > --- Mike <massey@(protected) > wrote:
> > > >
> > > > On a guess
> > > > Grab another keyboard.
> > > > > Parse error on line 102 of section Keyboard in
> >file
> > > > /etc/X11/XF86Config
> > > >
> > > > Suggests the one you have is not working or not
> >supported somehow. Maybe
> > > > pizza crumbs <G >
> > > >
> > > > M;)
> > > >
> > > >
> > > >
> > > > On Mon, 2002-08-26 at 21:30, Oh Yong Sing wrote:
> > > > > I installed Redhat Linux 7.3 on a server, and I
> >had chosen to install GNOME and KDE as
> > well. I
> > > > had
> > > > > also chosen GNOME to be the default desktop.
> > > > >
> > > > > When the install was complete and the server
> >rebooted, I was brought to the shell prompt
> > > > instead
> > > > > of a graphical login screen. After logging in as
> >root, and entering "startx ", the
> > following
> > > > > message was displayed:
> > > > >
> > > > > ----
> > > > > Parse warning on line 102 of section Keyboard in
> >file /etc/X11/XF86Config
> > > > > Ignoring obsolete keyword "LeftAlt ".
> > > > > Parse error on line 102 of section Keyboard in
> >file /etc/X11/XF86Config
> > > > > "Meta " is not a valid keyword in this
> >section.
> > > > > (EE) Problem parsing the config file
> > > > > (EE) Error from xf86HandleConfigFile()
> > > > >
> > > > > Fatal server error:
> > > > > no screens found
> > > > >
> > > > > When reporting a problem related to a server
> >crash, please send the full server output,
> > not
> > > > just
> > > > > the last messages.
> > > > > This can be found in the log file
> > "/var/log/XFree86.0.log ".
> > > > > Please report problem to xfree86@(protected)
> > > > >
> > > > > XIO: fatal IO error 104 (Connection reset by peer)
> >on X server ":0.0 " after 0 requests (0
> > > > known
> > > > > processed) with 0 events remaining.
> > > > > ----
> > > > >
> > > > > I tried to use Xconfigurator. Once inside the
> >program, I hit enter on the "OK " button to
> > > > proceed.
> > > > > The program exited with the words "Segmentation
> >fault ", and I was back at the shell
> > prompt.
> > > > >
> > > > > What is wrong and what can I do? Thanks in
> >advance.
> > > > >
> > > > > Yong Sing
>
>
>__ ____ ____ ____ ____ ____ ____ ____ ____ ____ __
>Do You Yahoo!?
>Yahoo! Finance - Get real-time stock quotes
>
http://finance.yahoo.com
>
>
>
>
>--__--__--
>
>Message: 7
>Date: Tue, 27 Aug 2002 15:07:49 +0800 (CST)
>From: =?gb2312?q?Tomhanks?= <xihahe@(protected) >
>To: valhalla-list@(protected)
>Subject: (no subject)
>Reply-To: valhalla-list@(protected)
>
>--0-1269245219-1030432069=:70548
>Content-Type: text/plain; charset=gb2312
>Content-Transfer-Encoding: 8bit
>
>
>when I play DVD, I always get the error message as "Xine
>engiee error There is no available input plugin available
>to handle "xine-vi 0.9.7 " "
>
>who can help me with this problem? thanks
>
>
>
>
>
>-- ---- ---- ---- ---- ---- -----
>Do You Yahoo!?
>�Ż��������ʵ���,�����ܱ����ֵ���!
>--0-1269245219-1030432069=:70548
>Content-Type: text/html; charset=gb2312
>Content-Transfer-Encoding: 8bit
>
> <P >when I play DVD, I always get the error message as
> " <FONT color=red >Xine </FONT > engiee error There is no
>available input plugin available to handle "xine-vi
>0.9.7 " " </P >
> <P >who can help me with this problem?
>thanks </P > <BR > <BR > <p > <br > <hr size=1 > <b >Do You
>Yahoo!? </b > <br >
> <a
>href= "
http://rd.yahoo.com/mail_cn/tag/?http://cn.ent.yahoo.com/newsletter/index.html
" >�Ż��������ʵ���,�����ܱ����ֵ���! </a >
>--0-1269245219-1030432069=:70548--
>
>
>
>
>--__--__--
>
>Message: 8
>Date: Tue, 27 Aug 2002 15:08:02 +0800 (CST)
>From: =?gb2312?q?Tomhanks?= <xihahe@(protected) >
>Subject: Xine problem!
>To: valhalla-list@(protected)
>Reply-To: valhalla-list@(protected)
>
>--0-2125351050-1030432082=:57919
>Content-Type: text/plain; charset=gb2312
>Content-Transfer-Encoding: 8bit
>
>
>when I play DVD, I always get the error message as "Xine
>engiee error There is no available input plugin available
>to handle "xine-vi 0.9.7 " "
>
>who can help me with this problem? thanks
>
>
>
>
>
>-- ---- ---- ---- ---- ---- -----
>Do You Yahoo!?
>�Ż��������ʵ���,�����ܱ����ֵ���!
>--0-2125351050-1030432082=:57919
>Content-Type: text/html; charset=gb2312
>Content-Transfer-Encoding: 8bit
>
> <P >when I play DVD, I always get the error message as
> " <FONT color=red >Xine </FONT > engiee error There is no
>available input plugin available to handle "xine-vi
>0.9.7 " " </P >
> <P >who can help me with this problem?
>thanks </P > <BR > <BR > <p > <br > <hr size=1 > <b >Do You
>Yahoo!? </b > <br >
> <a
>href= "
http://rd.yahoo.com/mail_cn/tag/?http://cn.ent.yahoo.com/newsletter/index.html
" >�Ż��������ʵ���,�����ܱ����ֵ���! </a >
>--0-2125351050-1030432082=:57919--
>
>
>
>
>--__--__--
>
>Message: 9
>From: Wolfgang Gill <wolfgang@(protected) >
>To: " 'valhalla-list@(protected) ' "
> <valhalla-list@(protected) >
>Subject: RE: Xine problem!
>Date: Tue, 27 Aug 2002 17:25:32 +1000
>Reply-To: valhalla-list@(protected)
>
>This message is in MIME format. Since your mail reader
>does not understand
>this format, some or all of this message may not be
>legible.
>
>-- ---_=_NextPart_001_01C24D9A.EDC528BE
>Content-Type: text/plain
>
>That 's because you need to download and install the
>plugins which allow you
>to play the menued DVDs. I gave you the website for it,
>this morning. It 's
>the only best place to get the Xine stuff, and it has the
>links to the other
>websites which have the plugin stuff that you need.
>
>Wolf
>
> -- --Original Message-- --
>From: Tomhanks [mailto:xihahe@(protected)]
>Sent: Tuesday, 27 August 2002 05:08 pm
>To: valhalla-list@(protected)
>Subject: Xine problem!
>
>
>
>when I play DVD, I always get the error message as "Xine
>engiee error There
>is no available input plugin available to handle "xine-vi
>0.9.7 " "
>
>who can help me with this problem? thanks
>
>
>######################################################################
>Attention:
>This e-mail message is privileged and confidential. If
>you are not the
>intended recipient please delete the message and notify
>the sender.
>Any views or opinions presented are solely those of the
>author.
>
>This e-mail has been scanned and cleared by MailMarshal
>www.marshalsoftware.com
>######################################################################
>
>-- ---_=_NextPart_001_01C24D9A.EDC528BE
>Content-Type: text/html
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
>Transitional//EN " >
> <HTML > <HEAD >
> <META HTTP-EQUIV= "Content-Type " CONTENT= "text/html;
>charset=us-ascii " >
> <TITLE >Message </TITLE >
>
> <META content= "MSHTML 6.00.2719.2200 "
>name=GENERATOR > </HEAD >
> <BODY >
> <DIV > <SPAN class=396422207-27082002 > <FONT face= "Comic
>Sans MS " color=#0000ff
>size=2 >That 's because you need to download and install
>the plugins which allow
>you to play the menued DVDs. I gave you the website for
>it, this morning. It 's
>the only best place to get the Xine stuff, and it has the
>links to the other
>websites which have the plugin stuff that you
>need. </FONT > </SPAN > </DIV >
> <DIV > <SPAN class=396422207-27082002 > <FONT face= "Comic
>Sans MS " color=#0000ff
>size=2 > </FONT > </SPAN > </DIV >
> <DIV > <SPAN class=396422207-27082002 > <FONT face= "Comic
>Sans MS " color=#0000ff
>size=2 >Wolf </FONT > </SPAN > </DIV >
> <DIV > <FONT face=Tahoma > <FONT size=2 > <SPAN
>class=396422207-27082002 > <FONT
>face= "Comic Sans MS "
>color=#0000ff > </FONT > </SPAN > </FONT > </FONT > </DIV >
> <DIV > <FONT face=Tahoma > <FONT size=2 > <SPAN
>class=396422207-27082002 > </SPAN >-- --Original
>Message-- -- <BR > <B >From: </B >
>Tomhanks [mailto:xihahe@(protected)] <BR > <B >Sent: </B >
>Tuesday, 27 August 2002
>05:08 pm <BR > <B >To: </B >
>valhalla-list@(protected) <BR > <B >Subject: </B > Xine
>problem! <BR > <BR > </DIV > </FONT > </FONT >
> <BLOCKQUOTE
>style= "PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT:
>#0000ff 2px solid; MARGIN-RIGHT: 0px " >
> <P >when I play DVD, I always get the error message as
> " <FONT
> color=red >Xine </FONT > engiee error There is no
>available input plugin
> available to handle "xine-vi 0.9.7 " " </P >
> <P >who can help me with this problem?
>thanks </P > </BLOCKQUOTE >
> <HR > <STRONG > <FONT COLOR=#ff0000 >
>Attention: </FONT > </STRONG > <BR >
>This e-mail is privileged and confidential. If you are
>not the <BR >
>intended recipient please delete the message and notify
>the sender. <BR >
>Any views or opinions presented are solely those of the
>author. <BR >
> <P >
>This e-mail message has been scanned and cleared by
> <STRONG > <FONT COLOR=#ff8000 >MailMarshal </FONT > - <A
>href= "
http://www.marshalsoftware.com
" >www.marshalsoftware.com </A >
> </STRONG >
> <HR >
> </BODY > </HTML >
>
>-- ---_=_NextPart_001_01C24D9A.EDC528BE--
>
>
>
>
>--__--__--
>
>Message: 10
>Date: Tue, 27 Aug 2002 00:51:39 -0700 (PDT)
>From: Oh Yong Sing <ohyongsing@(protected) >
>Subject: Re: Can 't start X or run Xconfigurator
>To: valhalla-list@(protected)
>Reply-To: valhalla-list@(protected)
>
>I re-installed the whole thing, and I chose the Generic
>104-key keyboard layout, and the monitor
>type IBM 6540 G2.
>
>However, upon reboot, I still got the same error. This
>time I commented out the "LeftAlt ",
> "RightAlt ", "ScrollLock " and "RightCtl " lines, but I
>still have this error message:
>
>Data incomplete in file /etc/X11/XF86Config
> Device section "Generic VGA Card " must have a driver
>line
>
>It certainly look like there is a problem with the
>XF86Config file. Or is there a bug in this
>software? Do I need to apply some bug fix to remedy this
>problem?
>
>Yong Sing
>
>--- Mike <massey@(protected) > wrote:
> > >From the shell prompt you can use mc or pico and edit
> >the
> > etc/X11/XF86Config-4 file. or since your not running do
> >a new install
> > and choose a Generic keyboard.
> > The error was keyboard specific so the monitor should be
> >fine.
> > >Parse error on line 102 of section Keyboard in file
> >/etc/X11/XF86Config
> >
> > Let me know how it comes out.
> >
> >
> > CHeers
> >
> > M;)
> >
> > On Mon, 2002-08-26 at 23:28, Oh Yong Sing wrote:
> > > I think I 've selected a 105-key keyboard (which was
> >highlighted for me) during the setup. The
> > > keyboard actually have 104 keys, with 3 of them
> >Windows specific (for activating the Windows
> > Start
> > > menu). I have changed this keyboard with a 101-key
> >one, but X still won 't start (same error
> > > message). Is there any way to configure the keyboard
> >from the shell prompt?
> > >
> > > If I need to do a re-installation, what monitor and
> >keyboard type should I choose so that it
> > would
> > > work with all monitors and keyboards?
> > >
> > > Thanks for your help.
> > >
> > > --- Mike <massey@(protected) > wrote:
> > > >
> > > > On a guess
> > > > Grab another keyboard.
> > > > > Parse error on line 102 of section Keyboard in
> >file
> > > > /etc/X11/XF86Config
> > > >
> > > > Suggests the one you have is not working or not
> >supported somehow. Maybe
> > > > pizza crumbs <G >
> > > >
> > > > M;)
> > > >
> > > >
> > > >
> > > > On Mon, 2002-08-26 at 21:30, Oh Yong Sing wrote:
> > > > > I installed Redhat Linux 7.3 on a server, and I
> >had chosen to install GNOME and KDE as
> > well. I
> > > > had
> > > > > also chosen GNOME to be the default desktop.
> > > > >
> > > > > When the install was complete and the server
> >rebooted, I was brought to the shell prompt
> > > > instead
> > > > > of a graphical login screen. After logging in as
> >root, and entering "startx ", the
> > following
> > > > > message was displayed:
> > > > >
> > > > > ----
> > > > > Parse warning on line 102 of section Keyboard in
> >file /etc/X11/XF86Config
> > > > > Ignoring obsolete keyword "LeftAlt ".
> > > > > Parse error on line 102 of section Keyboard in
> >file /etc/X11/XF86Config
> > > > > "Meta " is not a valid keyword in this
> >section.
> > > > > (EE) Problem parsing the config file
> > > > > (EE) Error from xf86HandleConfigFile()
> > > > >
> > > > > Fatal server error:
> > > > > no screens found
> > > > >
> > > > > When reporting a problem related to a server
> >crash, please send the full server output,
> > not
> > > > just
> > > > > the last messages.
> > > > > This can be found in the log file
> > "/var/log/XFree86.0.log ".
> > > > > Please report problem to xfree86@(protected)
> > > > >
> > > > > XIO: fatal IO error 104 (Connection reset by peer)
> >on X server ":0.0 " after 0 requests (0
> > > > known
> > > > > processed) with 0 events remaining.
> > > > > ----
> > > > >
> > > > > I tried to use Xconfigurator. Once inside the
> >program, I hit enter on the "OK " button to
> > > > proceed.
> > > > > The program exited with the words "Segmentation
> >fault ", and I was back at the shell
> > prompt.
> > > > >
> > > > > What is wrong and what can I do? Thanks in
> >advance.
> > > > >
> > > > > Yong Sing
>
>
>__ ____ ____ ____ ____ ____ ____ ____ ____ ____ __
>Do You Yahoo!?
>Yahoo! Finance - Get real-time stock quotes
>
http://finance.yahoo.com
>
>
>
>
>
>--__--__--
>
>__ ____ ____ ____ ____ ____ ____ ____ ____ ____
>Valhalla-list mailing list
>Valhalla-list@(protected)
>https://listman.redhat.com/mailman/listinfo/valhalla-list
>
>
>End of Valhalla-list Digest
|
|
|