 | | | Routing issue | Routing issue 2003-06-04 - By Jon Miller
Back
For some reason one (1) of my locations has ceased operating.
I cannot ping the other end. I have a VPN from the office to the home and from
the office to clients site. This is all done using cipe on RHL7.2 servers. The
infrastructure is using xdsl links with Cisco routers.
home 192.168.10.3 (thru cipcb1)<-- -->ofc 192.168.10.1 (cipcb0) <@(protected)>client
192.168.10.2(cipcb0)
hm = 192.168.5.0 ext-ip 203.153.229.85
ofc = 192.168.1.0 ext-ip 203.153.229.84
site = 192.168.0.0 ext-ip 203.153.229.86
Routing table from ofc
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.10.3 0.0.0.0 255.255.255.255 UH 0 0 0
cipcb1
192.168.10.2 0.0.0.0 255.255.255.255 UH 0 0 0
cipcb0
192.168.3.0 0.0.0.0 255.255.255.0 U 0 0
0 eth1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0
0 eth0
192.168.0.0 192.168.10.2 255.255.255.0 UG 0 0 0
cipcb0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0
0 lo
0.0.0.0 192.168.3.254 0.0.0.0 UG 0 0
0 eth1
Can anyone point out any problem?
Jon L. Miller, MCNE, CNS
Director/Sr Systems Consultant
MMT Networks Pty Ltd
http://www.mmtnetworks.com.au
"I don't know the key to success, but the key to failure
is trying to please everybody." -Bill Cosby
|
|
|