 | | routing problem? 2 hosts thru dialup server with Crossover Cables/No
Hub | routing problem? 2 hosts thru dialup server with Crossover Cables/No
Hub 2004-02-20 - By John Kennedy
Back
Good morning,
i am trying to establish a network using
1 RH-9 server [ LAN ]
2 hosts [ NK and LK ]
The dialup server [ LAN ] has 2 nics [eth0 and eth1]
which are connected to [NK] and [LK] by Crossover Cables directly
[I 'm not using a Hub]
My Problem:
I can ping successfully from LAN to both LK AND NK...
I can ping from NK to both of the nics on LAN, but not to the nic on LK.
And i can access the Internet from NK as well.
I can not ping anything from LK to LAN or NK
Is my routing screwed up? I 'm confused.
Thanks in advance for any help I 'm given.
Johnny
My routing setup.....
[root@(protected) root]# netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
10.112.112.112 0.0.0.0 255.255.255.255 UH 0 0 0
ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.112.112.112 0.0.0.0 UG 0 0 0
ppp0
My /etc/hosts file....
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 lan.famlan.abc lan localhost.localdomain localhost
192.168.1.100 lan.famlan.abc lan [ this is= eth0 ]
192.168.1.105 nk.famlan.abc nk
172.17.0.1 intgw2.famlan.abc intgw2 [ this is= eth1 ]
172.17.0.2 lk.famlan.abc 39zv701 lk
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@(protected)?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
|
|
|