 | | | kernel 2.6.3 install, lost nics and /dev/usb0 | kernel 2.6.3 install, lost nics and /dev/usb0 2004-03-09 - By Paal Marker
Back
I have done my first change to new kernel. On a rh8 kernel 2.4.18-14
changed kernel to 2.6.3. The box is working as firewall, nameserver,
sambaserver and dhcp server.
New kernel 2.6.3 boots ok, but I lost several devices. Both nics and
printer wich was connected to /dev/usb0 are lost. Booting the old
kernel gives no problem, and I have to run on that kernel for now. Both
nics and printer works fine with 2.4.18-14
To manually probe for the nics gives no result, these are both
3com905-tx nics.
For the printer concerned, I get the message that /dev/usb0 does not
excist.
As this is the first time I change kernel on any linux-system, I am a
little lost here.
Where do I start to solve this? Is what I experience here usually a
problem when changing to kernel 2.6.3?
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@(protected)?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
|
|
|