 | | | sr0-scd0 problem | sr0-scd0 problem 2004-04-06 - By Vojinivic M. Dejan
Back
Hello,
here is my problem.
Recently i have bought a PIONEER DVD-RW DVR-106 (See http://DVR-106.ora-code.com)D writer for my RH 7.1
machine which is recognized
as a hda=ide-scsi.
BIOS recognize it, kernel recognize it, cdrecord recognize it, and i can
mount and read
CD-ROM's and DVD's but when i try to mount blank DVD-R or CD-ROM i'm
getting next message:
[mntent]: warning: no final newline at the end of /etc/fstab
mount: wrong fs type, bad option, bad superblock on /dev/sr0, or too
many mounted file systems
Same message pops when i try to mount -t iso9660 /dev/scd0 /mnt/dvd
I have even tried with UDF file system bat same message came out.
I did enabled "ide-scsi" emulation and "scsi cd-rom".
Here are my /var/log/message (part of it), cdrecord --scanbus, lsmod and
scsi_info /dev/sr0.
# /var/log/message
Apr 6 08:14:14 gvs3 syslog: syslogd startup succeeded
Apr 6 08:14:14 gvs3 syslog: klogd startup succeeded
Apr 6 08:14:14 gvs3 kernel: klogd 1.4-0, log source = /proc/kmsg
started.
Apr 6 08:14:14 gvs3 kernel: Inspecting /boot/System.map-2 (See http://map-2.ora-code.com).4.2-2
Apr 6 08:14:14 gvs3 portmap: portmap startup succeeded
Apr 6 08:14:14 gvs3 kernel: Loaded 14301 symbols from
/boot/System.map-2 (See http://map-2.ora-code.com).4.2-2.
Apr 6 08:14:14 gvs3 kernel: Symbols match kernel version 2.4.2.
Apr 6 08:14:14 gvs3 kernel: Loaded 697 symbols from 12 modules.
Apr 6 08:14:14 gvs3 kernel: Linux version 2.4.2-2
(root@(protected)) (gcc version 2.96 20000731 (Red Hat Linux
7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
Apr 6 08:14:14 gvs3 kernel: BIOS-provided physical RAM map:
Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 000000000009fc00 @
0000000000000000 (usable)
Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 0000000000000400 @
000000000009fc00 (reserved)
Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 0000000000010000 @
00000000000f0000 (reserved)
Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 0000000007700000 @
0000000000100000 (usable)
Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 0000000000080000 @
00000000fff80000 (reserved)
Apr 6 08:14:14 gvs3 kernel: On node 0 totalpages: 30720
Apr 6 08:14:14 gvs3 kernel: zone(0): 4096 pages.
Apr 6 08:14:14 gvs3 kernel: zone DMA has max 32 cached pages.
Apr 6 08:14:14 gvs3 kernel: zone(1): 26624 pages.
Apr 6 08:14:14 gvs3 kernel: zone Normal has max 208 cached pages.
Apr 6 08:14:14 gvs3 kernel: zone(2): 0 pages.
Apr 6 08:14:14 gvs3 kernel: zone HighMem has max 1 cached pages.
Apr 6 08:14:14 gvs3 nfslock: rpc.statd startup succeeded
Apr 6 08:14:14 gvs3 kernel: hm, page 01000000 reserved twice.
Apr 6 08:14:14 gvs3 kernel: Kernel command line: auto
BOOT_IMAGE=linux-up ro root=807 BOOT_FILE=/boot/vmlinuz-2 (See http://nuz-2.ora-code.com).4.2-2
hda=ide-scsi
Apr 6 08:14:14 gvs3 kernel: ide_setup: hda=ide-scsi
Apr 6 08:14:14 gvs3 kernel: Initializing CPU#0
Apr 6 08:14:14 gvs3 kernel: Detected 853.865 MHz processor.
Apr 6 08:14:14 gvs3 kernel: Console: colour VGA+ 80x25
Apr 6 08:14:14 gvs3 kernel: Calibrating delay loop... 1703.93 BogoMIPS
Apr 6 08:14:14 gvs3 kernel: Memory: 118064k/122880k available (1365k
kernel code, 4428k reserved, 92k data, 236k init, 0k highmem)
Apr 6 08:14:14 gvs3 kernel: Dentry-cache hash table entries: 16384
(order: 5, 131072 bytes)
Apr 6 08:14:14 gvs3 kernel: Buffer-cache hash table entries: 4096
(order: 2, 16384 bytes)
Apr 6 08:14:14 gvs3 kernel: Page-cache hash table entries: 32768
(order: 6, 262144 bytes)
Apr 6 08:14:14 gvs3 kernel: Inode-cache hash table entries: 8192
(order: 4, 65536 bytes)
Apr 6 08:14:14 gvs3 kernel: VFS: Diskquotas version dquot_6.5.0
initialized
Apr 6 08:14:14 gvs3 kernel: CPU: Before vendor init, caps: 0383f9ff
00000000 00000000, vendor = 0
Apr 6 08:14:14 gvs3 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Apr 6 08:14:14 gvs3 kernel: CPU: L2 cache: 128K
Apr 6 08:14:14 gvs3 kernel: Intel machine check architecture supported.
Apr 6 08:14:14 gvs3 kernel: Intel machine check reporting enabled on
CPU#0.
Apr 6 08:14:14 gvs3 kernel: CPU: After vendor init, caps: 0383f9ff
00000000 00000000 00000000
Apr 6 08:14:14 gvs3 kernel: CPU: After generic, caps: 0383f9ff 00000000
00000000 00000000
Apr 6 08:14:14 gvs3 kernel: CPU: Common caps: 0383f9ff 00000000
00000000 00000000
Apr 6 08:14:14 gvs3 kernel: CPU: Intel Celeron (Coppermine) stepping 0a
Apr 6 08:14:14 gvs3 kernel: Enabling fast FPU save and restore... done.
Apr 6 08:14:14 gvs3 kernel: Enabling unmasked SIMD FPU exception
support... done.
Apr 6 08:14:14 gvs3 kernel: Checking 'hlt' instruction... OK.
Apr 6 08:14:14 gvs3 kernel: POSIX conformance testing by UNIFIX
Apr 6 08:14:14 gvs3 kernel: mtrr: v1.37 (20001109) Richard Gooch
(rgooch@(protected))
Apr 6 08:14:14 gvs3 kernel: mtrr: detected mtrr type: Intel
Apr 6 08:14:14 gvs3 rpc.statd[1029]: Version 0.3.1 Starting
Apr 6 08:14:14 gvs3 kernel: PCI: PCI BIOS revision 2.10 entry at
0xfdb51, last bus=1
Apr 6 08:14:14 gvs3 kernel: PCI: Using configuration type 1
Apr 6 08:14:14 gvs3 kernel: PCI: Probing PCI hardware
Apr 6 08:14:14 gvs3 kernel: PCI: Using IRQ router VIA [1106/0686] at
00:07.0
Apr 6 08:14:14 gvs3 kernel: isapnp: Scanning for PnP cards...
Apr 6 08:14:14 gvs3 kernel: isapnp: No Plug & Play device found
Apr 6 08:14:15 gvs3 keytable: Loading keymap:
Apr 6 08:14:15 gvs3 kernel: Linux NET4.0 for Linux 2.4
Apr 6 08:14:15 gvs3 kernel: Based upon Swansea University Computer
Society NET3.039
Apr 6 08:14:15 gvs3 kernel: Initializing RT netlink socket
Apr 6 08:14:15 gvs3 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
version 1.14)
Apr 6 08:14:15 gvs3 kernel: Starting kswapd v1.8
Apr 6 08:14:15 gvs3 kernel: pty: 256 Unix98 ptys configured
Apr 6 08:14:15 gvs3 kernel: block: queued sectors max/low
78301kB/26100kB, 256 slots per queue
Apr 6 08:14:15 gvs3 kernel: RAMDISK driver initialized: 16 RAM disks of
4096K size 1024 blocksize
Apr 6 08:14:15 gvs3 kernel: Uniform Multi-Platform E-IDE driver
Revision: 6.31
Apr 6 08:14:15 gvs3 kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Apr 6 08:14:15 gvs3 kernel: VP_IDE: IDE controller on PCI bus 00 dev 39
Apr 6 08:14:15 gvs3 kernel: VP_IDE: chipset revision 6
Apr 6 08:14:15 gvs3 kernel: VP_IDE: not 100%% native mode: will probe
irqs later
Apr 6 08:14:15 gvs3 kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100
controller on pci00:07.1
Apr 6 08:14:15 gvs3 kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS
settings: hda:DMA, hdb:pio
Apr 6 08:14:15 gvs3 kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS
settings: hdc:pio, hdd:pio
Apr 6 08:14:15 gvs3 kernel: PDC20267: IDE controller on PCI bus 00 dev
70
Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 5 for device 00:0e.0
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.3
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.2
Apr 6 08:14:15 gvs3 kernel: PDC20267: chipset revision 2
Apr 6 08:14:15 gvs3 kernel: PDC20267: not 100%% native mode: will probe
irqs later
Apr 6 08:14:15 gvs3 kernel: PDC20267: ROM enabled at 0xdffd0000
Apr 6 08:14:15 gvs3 kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary
MASTER Mode Secondary MASTER Mode.
Apr 6 08:14:15 gvs3 kernel: PDC20267: neither IDE port enabled (BIOS)
Apr 6 08:14:15 gvs3 kernel: hda: PIONEER DVD-RW DVR-106 (See http://DVR-106.ora-code.com)D, ATAPI
CD/DVD-ROM drive
Apr 6 08:14:15 gvs3 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 6 08:14:15 gvs3 kernel: Floppy drive(s): fd0 is 1.44M
Apr 6 08:14:15 gvs3 kernel: FDC 0 is a post-1991 (See http://ost-1991.ora-code.com) 82077
Apr 6 08:14:15 gvs3 kernel: RAMDISK: Compressed image found at block 0
Apr 6 08:14:15 gvs3 kernel: Freeing initrd memory: 353k freed
Apr 6 08:14:15 gvs3 kernel: Serial driver version 5.02 (2000-08-09)
with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Apr 6 08:14:15 gvs3 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Apr 6 08:14:15 gvs3 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Apr 6 08:14:15 gvs3 kernel: Real Time Clock Driver v1.10d
Apr 6 08:14:15 gvs3 kernel: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Apr 6 08:14:15 gvs3 kernel: md.c: sizeof(mdp_super_t) = 4096
Apr 6 08:14:15 gvs3 kernel: autodetecting RAID arrays
Apr 6 08:14:15 gvs3 kernel: autorun ...
Apr 6 08:14:15 gvs3 kernel: ... autorun DONE.
Apr 6 08:14:15 gvs3 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Apr 6 08:14:15 gvs3 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Apr 6 08:14:15 gvs3 kernel: IP: routing cache hash table of 512
buckets, 4Kbytes
Apr 6 08:14:15 gvs3 kernel: TCP: Hash tables configured (established
8192 bind 8192)
Apr 6 08:14:15 gvs3 kernel: Linux IP multicast router 0.06 plus PIM-SM
Apr 6 08:14:15 gvs3 kernel: NET4: Unix domain sockets 1.0/SMP for Linux
NET4.0.
Apr 6 08:14:15 gvs3 kernel: VFS: Mounted root (ext2 filesystem).
Apr 6 08:14:15 gvs3 kernel: SCSI subsystem driver Revision: 1.00
Apr 6 08:14:15 gvs3 kernel: PROMISE FastTrak Series Linux Driver
Version 1.02.0.22
Apr 6 08:14:15 gvs3 kernel: spurious 8259A interrupt: IRQ7.
Apr 6 08:14:15 gvs3 kernel: scsi0 : FastTrak
Apr 6 08:14:15 gvs3 kernel: Vendor: Promise Model: 1X2
Mirror/RAID1 Rev: 1.10
Apr 6 08:14:15 gvs3 kernel: Type:
Direct-Access ANSI SCSI revision: 02
Apr 6 08:14:15 gvs3 kernel: Attached scsi disk sda at scsi0, channel 0,
id 0, lun 0
Apr 6 08:14:15 gvs3 kernel: SCSI device sda: 160086465 512-byte hdwr
sectors (81964 MB)
Apr 6 08:14:15 gvs3 kernel: Partition check:
Apr 6 08:14:15 gvs3 kernel: sda: sda1 sda2 < sda5 sda6 sda7 >
Apr 6 08:14:15 gvs3 kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Apr 6 08:14:15 gvs3 kernel: change_root: old root has d_count=3
Apr 6 08:14:15 gvs3 kernel: Trying to unmount old root ... okay
Apr 6 08:14:15 gvs3 kernel: Freeing unused kernel memory: 236k freed
Apr 6 08:14:15 gvs3 kernel: Adding Swap: 369452k swap-space (priority
-1)
Apr 6 08:14:15 gvs3 kernel: usb.c: registered new driver usbdevfs
Apr 6 08:14:15 gvs3 kernel: usb.c: registered new driver hub
Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: $Revision: 1.251 $ time
20:53:29 Apr 8 2001
Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: High bandwidth mode enabled
Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 5 for device 00:07.3
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.2
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:0e.0
Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 5
Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: Detected 2 ports
Apr 6 08:14:15 gvs3 kernel: usb.c: new USB bus registered, assigned bus
number 1
Apr 6 08:14:15 gvs3 kernel: hub.c: USB hub found
Apr 6 08:14:15 gvs3 kernel: hub.c: 2 ports detected
Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 5 for device 00:07.2
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.3
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:0e.0
Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: USB UHCI at I/O 0xac00, IRQ 5
Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: Detected 2 ports
Apr 6 08:14:15 gvs3 kernel: usb.c: new USB bus registered, assigned bus
number 2
Apr 6 08:14:15 gvs3 kernel: hub.c: USB hub found
Apr 6 08:14:15 gvs3 kernel: hub.c: 2 ports detected
Apr 6 08:14:15 gvs3 kernel: scsi1 : SCSI host adapter emulation for IDE
ATAPI devices
Apr 6 08:14:15 gvs3 kernel: Vendor: PIONEER Model: DVD-RW
DVR-106 (See http://DVR-106.ora-code.com)D Rev: 1.07
Apr 6 08:14:15 gvs3 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Apr 6 08:14:15 gvs3 kernel: Winbond Super-IO detection, now testing
ports 3F0,370,250,4E,2E ...
Apr 6 08:14:15 gvs3 kernel: SMSC Super-IO detection, now testing Ports
2F0, 370 ...
Apr 6 08:14:15 gvs3 kernel: 0x378: FIFO is 16 bytes
Apr 6 08:14:15 gvs3 kernel: 0x378: writeIntrThreshold is 8
Apr 6 08:14:15 gvs3 kernel: 0x378: readIntrThreshold is 8
Apr 6 08:14:15 gvs3 kernel: 0x378: possible IRQ conflict!
Apr 6 08:14:15 gvs3 kernel: parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE,COMPAT,ECP]
Apr 6 08:14:15 gvs3 kernel: parport_pc: Via 686A parallel port:
io=0x378, irq=7
Apr 6 08:14:15 gvs3 kernel: ip_conntrack (960 buckets, 7680 max)
Apr 6 08:14:15 gvs3 kernel: NET4: Linux IPX 0.46 for NET4.0
Apr 6 08:14:15 gvs3 kernel: IPX Portions Copyright (c) 1995 Caldera,
Inc.
Apr 6 08:14:15 gvs3 kernel: IPX Portions Copyright (c) 2000, 2001
Conectiva, Inc.
Apr 6 08:14:15 gvs3 kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Apr 6 08:14:15 gvs3 kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17
Modified by Andrey V. Savochkin <saw@(protected)> and others
Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 10 for device 00:0f.0
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.5
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:13.0
Apr 6 08:14:15 gvs3 kernel: eth0: Intel Corporation 82557 [Ethernet Pro
100], 00:08:9B:06:05:4C, I/O at 0xa800, IRQ 10.
Apr 6 08:14:15 gvs3 kernel: Board assembly 729757-006, Physical
connectors present: RJ45
Apr 6 08:14:15 gvs3 kernel: Primary interface chip i82555 PHY #1.
Apr 6 08:14:15 gvs3 kernel: General self-test: passed.
Apr 6 08:14:15 gvs3 kernel: Serial sub-system self-test: passed.
Apr 6 08:14:15 gvs3 kernel: Internal registers self-test: passed.
Apr 6 08:14:15 gvs3 kernel: ROM checksum self-test: passed
(0x04f4518b).
Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 10 for device 00:10.0
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:14.0
Apr 6 08:14:15 gvs3 kernel: eth1: Intel Corporation 82557 [Ethernet Pro
100] (#2), 00:08:9B:06:05:4D, I/O at 0xa400, IRQ 10.
Apr 6 08:14:15 gvs3 kernel: Board assembly 729757-006, Physical
connectors present: RJ45
Apr 6 08:14:15 gvs3 kernel: Primary interface chip i82555 PHY #1.
Apr 6 08:14:15 gvs3 kernel: General self-test: passed.
Apr 6 08:14:15 gvs3 kernel: Serial sub-system self-test: passed.
Apr 6 08:14:15 gvs3 kernel: Internal registers self-test: passed.
Apr 6 08:14:15 gvs3 kernel: ROM checksum self-test: passed
(0x04f4518b).
Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 10 for device 00:13.0
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.5
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:0f.0
Apr 6 08:14:15 gvs3 kernel: 3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker
and others. http://www.scyld.com/network/vortex.html
Apr 6 08:14:15 gvs3 kernel: See Documentation/networking/vortex.txt
Apr 6 08:14:15 gvs3 kernel: eth2: 3Com PCI 3c905 Boomerang 100baseTx at
0xa000, 00:60:08:1d:5e:6f, IRQ 10
Apr 6 08:14:15 gvs3 kernel: product code 4b4b rev 00.0 date 12-28-95
Apr 6 08:14:15 gvs3 kernel: 8K word-wide RAM 3:5 Rx:Tx split,
autoselect/MII interface.
Apr 6 08:14:15 gvs3 kernel: MII transceiver found at address 24,
status 786f.
Apr 6 08:14:15 gvs3 kernel: Enabling bus-master transmits and
whole-frame receives.
Apr 6 08:14:15 gvs3 kernel: eth2: scatter/gather disabled. h/w
checksums disabled
Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 10 for device 00:14.0
Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:10.0
Apr 6 08:14:15 gvs3 kernel: eth3: 3Com PCI 3c905C Tornado at 0x9c00,
00:01:02:f6:d2:39, IRQ 10
Apr 6 08:14:15 gvs3 kernel: product code 4552 rev 00.13 date 11-27-00
Apr 6 08:14:15 gvs3 kernel: Full duplex capable
Apr 6 08:14:15 gvs3 kernel: 8K byte-wide RAM 5:3 Rx:Tx split,
autoselect/Autonegotiate interface.
Apr 6 08:14:15 gvs3 kernel: MII transceiver found at address 24,
status 7809.
Apr 6 08:14:15 gvs3 kernel: Enabling bus-master transmits and
whole-frame receives.
Apr 6 08:14:15 gvs3 kernel: eth3: scatter/gather disabled. h/w
checksums enabled
Apr 6 08:14:15 gvs3 kernel: eth2: first available media type: MII
Apr 6 08:14:15 gvs3 kernel: eth3: using NWAY device table, not 8
Apr 6 08:14:15 gvs3 keytable:
Apr 6 08:14:15 gvs3 rc: Starting keytable: succeeded
Apr 6 08:14:15 gvs3 rc: Starting pcmcia: succeeded
Apr 6 08:14:15 gvs3 random: Initializing random number generator:
succeeded
Apr 6 08:14:15 gvs3 mount: [mntent]: warning: no final newline at the
end of /etc/fstab
Apr 6 08:14:15 gvs3 netfs: Mounting other filesystems: succeeded
Apr 6 08:14:15 gvs3 apmd[1129]: Version 3.0final (APM BIOS 1.2, Linux
driver 1.14)
Apr 6 08:14:15 gvs3 apmd: apmd startup succeeded
Apr 6 08:14:15 gvs3 apmd[1129]: Charge: * * * (-1% unknown)
Apr 6 08:14:15 gvs3 autofs: autofs startup succeeded
Apr 6 08:14:15 gvs3 automount[1178]: starting automounter version
3.1.7, path = /misc, maptype = file, mapname = /etc/auto.misc
Apr 6 08:14:16 gvs3 atd: atd startup succeeded
Apr 6 08:14:16 gvs3 sshd: Starting sshd:
Apr 6 08:14:16 gvs3 automount[1178]: using kernel protocol version 3
Apr 6 08:14:16 gvs3 sshd: succeeded
Apr 6 08:14:16 gvs3 sshd:
Apr 6 08:14:16 gvs3 rc: Starting sshd: succeeded
Apr 6 08:14:17 gvs3 xinetd[1225]: amandaidx disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: time disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: time disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: tftp disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: telnet disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: talk disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: swat disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: rsync disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: shell disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: login disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: exec disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: pop3s disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: ntalk disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: amidxtape disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: kshell disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: telnet disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: klogin disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: pop3 disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: pop2 disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: imaps disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: chargen disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: ftp disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: finger disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: eklogin disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: echo-udp disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: echo disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: skkserv disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: daytime-udp disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: chargen-udp disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: comsat disabled, removing
Apr 6 08:14:17 gvs3 xinetd[1225]: xinetd Version 2.1.8.9pre14 started
with
Apr 6 08:14:17 gvs3 xinetd[1225]: libwrap
Apr 6 08:14:17 gvs3 xinetd[1225]: options compiled in.
Apr 6 08:14:17 gvs3 xinetd[1225]: Started working: 4 available services
Apr 6 08:14:19 gvs3 /etc/hotplug/usb.agent: ... no drivers for USB
product 0/0/0
Apr 6 08:14:19 gvs3 /etc/hotplug/usb.agent: ... no drivers for USB
product 0/0/0
Apr 6 08:14:19 gvs3 xinetd: xinetd startup succeeded
Apr 6 08:14:19 gvs3 nwserv:
Apr 6 08:14:19 gvs3 nwserv:
Apr 6 08:14:19 gvs3 nwserv: Mars_nwe V0.99pl19 started using
/etc/nwserv.conf.
Apr 6 08:14:19 gvs3 nwserv: If you have problems, please read
mars_nwe/doc/BUGS !
Apr 6 08:14:19 gvs3 nwserv: Errors/warnings will be reported in
/var/log/mars_nwe.log
Apr 6 08:14:19 gvs3 nwserv:
Apr 6 08:14:19 gvs3 nwserv:
Apr 6 08:14:20 gvs3 mars-nwe: nwserv startup succeeded
Apr 6 08:14:21 gvs3 gpm: gpm startup succeeded
Apr 6 08:14:23 gvs3 httpd: httpd startup succeeded
Apr 6 08:14:23 gvs3 mcserv: mcserv startup succeeded
Apr 6 08:14:23 gvs3 FreeWnn: Starting FreeWnn:
Apr 6 08:14:24 gvs3 FreeWnn:
Apr 6 08:14:24 gvs3 rc: Starting FreeWnn: succeeded
Apr 6 08:14:24 gvs3 crond: crond startup succeeded
Apr 6 08:14:25 gvs3 xfs: listening on port 7100
Apr 6 08:14:25 gvs3 xfs: xfs startup succeeded
Apr 6 08:14:26 gvs3 anacron: anacron startup succeeded
Apr 6 08:14:27 gvs3 linuxconf: Running Linuxconf hooks: succeeded
Apr 6 08:14:28 gvs3 rc: Starting webmin: succeeded
Apr 6 08:14:49 gvs3 kde(pam_unix)[1497]: session opened for user root
by (uid=0)
Apr 6 08:14:56 gvs3 kernel: Via 686a audio driver 1.1.14b
Apr 6 08:14:56 gvs3 kernel: PCI: Found IRQ 10 for device 00:07.5
Apr 6 08:14:56 gvs3 kernel: PCI: The same IRQ used for device 00:0f.0
Apr 6 08:14:56 gvs3 kernel: PCI: The same IRQ used for device 00:13.0
Apr 6 08:14:56 gvs3 kernel: ac97_codec: AC97 Audio codec, id:
0x414c:0x4710 (ALC200/200P)
Apr 6 08:14:56 gvs3 kernel: via82cxxx: board #1 at 0xBC00, IRQ 10
Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
sound-service-0 (See http://ice-0.ora-code.com)-0
Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
sound-slot-1 (See http://lot-1.ora-code.com)
Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
sound-service-1 (See http://ice-1.ora-code.com)-0
Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
sound-slot-1 (See http://lot-1.ora-code.com)
Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
sound-service-1 (See http://ice-1.ora-code.com)-0
Apr 6 08:14:59 gvs3 kernel: IPX: Network number collision 2
Apr 6 08:14:59 gvs3 kernel: eth1 802.2 and eth0 802.3
Apr 6 08:15:00 gvs3 kernel: IPX: Network number collision 2
Apr 6 08:15:00 gvs3 kernel: eth1 802.2 and eth0 802.3
Apr 6 08:15:56 gvs3 kernel: IPX: Network number collision 2
Apr 6 08:15:56 gvs3 kernel: eth1 802.2 and eth0 802.3
Apr 6 08:16:28 gvs3 kernel: IPX: Network number collision 2
Apr 6 08:16:28 gvs3 kernel: eth1 802.2 and eth0 802.3
Apr 6 08:16:33 gvs3 kernel: IPX: Network number collision 2
Apr 6 08:16:33 gvs3 kernel: eth1 802.2 and eth0 802.3
Apr 6 08:16:38 gvs3 kernel: Attached scsi CD-ROM sr0 at scsi1, channel
0, id 0, lun 0
Apr 6 08:16:38 gvs3 kernel: sr0: scsi3-mmc drive: 47x/47x writer cd/rw
xa/form2 cdda tray
Apr 6 08:16:38 gvs3 kernel: Uniform CD-ROM driver Revision: 3.12
Apr 6 08:16:38 gvs3 kernel: attempt to access beyond end of device
Apr 6 08:16:38 gvs3 kernel: 0b:00: rw=0, want=34, limit=2
Apr 6 08:16:38 gvs3 kernel: isofs_read_super: bread failed, dev=0b:00,
iso_blknum=16, block=16
Apr 6 08:16:38 gvs3 kernel: attempt to access beyond end of device
Apr 6 08:16:38 gvs3 kernel: 0b:00: rw=0, want=34, limit=2
Apr 6 08:16:38 gvs3 kernel: isofs_read_super: bread failed, dev=0b:00,
iso_blknum=16, block=16
Apr 6 08:17:04 gvs3 modprobe: modprobe: Can't locate module
char-major-97 (See http://jor-97.ora-code.com)
# cdrecord --scanbus
scsibus0:
0,0,0 0) 'Promise ' '1x2 Mirror/RAID1'
'1.10' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'PIONEER ' 'DVD-RW DVR-106 (See http://DVR-106.ora-code.com)D'
'1.07' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
# lsmod
Module Size
Used by
sg
26688 0 (autoclean)
sr_mod
15264 0 (autoclean)
via82cxxx_audio 17552 0
(autoclean)
ac97_codec 8800
0 (autoclean) [via82cxxx_audio]
soundcore
4464 2 (autoclean) [via82cxxx_audio]
autofs
11264 1 (autoclean)
3c59x
25344 2 (autoclean)
eepro100
16624 2 (autoclean)
ipx
15520 18 (autoclean)
ipchains
38976 0 (unused)
ide-scsi
8352 0
ide-cd
26848 0
cdrom
27232 0 [sr_mod ide-cd]
usb-uhci
20720 0 [unused]
usbcore
49664 1 [usb-uhci]
FastTrak
86784 4
sd_mod
11680 4
scsi_mod
95072 5 [sg sr_mod ide-scsi FastTrak sd_mod]
#scsi_info /dev/sr0
SCSI_ID="0,0,0"
MODEL="PIONEER DVD-RW DVR-106 (See http://DVR-106.ora-code.com)D"
FW_REV="1.07"
# /etc/fstab
/dev/sr0 /mnt/dvd iso9660 noauto,user,ro 0 0
Can anybody help me?
Appreciate any help.
Many thanks.
__ ____ ____ ____ ____ ____ ____ ____ ____ ____
enigma-list mailing list
enigma-list@(protected)
https://www.redhat.com/mailman/listinfo/enigma-list
|
|
|