 | | | sr0-scd0 problem | sr0-scd0 problem 2004-04-06 - By Timothy Beck
Back
Last time I checked... You can't mount a blank disk. You must have
something on the disk for it to mount. Same principle as trying to read
a totally un-formated disk??? Would make sense to me.
Most Burning software should see it as a "blank" and ready to write
stuff to.
Tim
On Tue, 2004-04-06 at 07:18, Vojinivic M. Dejan wrote:
> Hello,
> here is my problem.
> Recently i have bought a PIONEER DVD-RW DVR-106 (See http://DVR-106.ora-code.com)D writer for my RH 7.1
> machine which is recognized
> as a hda=ide-scsi.
> BIOS recognize it, kernel recognize it, cdrecord recognize it, and i can
> mount and read
> CD-ROM's and DVD's but when i try to mount blank DVD-R or CD-ROM i'm
> getting next message:
>
> [mntent]: warning: no final newline at the end of /etc/fstab
> mount: wrong fs type, bad option, bad superblock on /dev/sr0, or too
> many mounted file systems
> Same message pops when i try to mount -t iso9660 /dev/scd0 /mnt/dvd
> I have even tried with UDF file system bat same message came out.
> I did enabled "ide-scsi" emulation and "scsi cd-rom".
> Here are my /var/log/message (part of it), cdrecord --scanbus, lsmod and
> scsi_info /dev/sr0.
>
> # /var/log/message
>
> Apr 6 08:14:14 gvs3 syslog: syslogd startup succeeded
> Apr 6 08:14:14 gvs3 syslog: klogd startup succeeded
> Apr 6 08:14:14 gvs3 kernel: klogd 1.4-0, log source = /proc/kmsg
> started.
> Apr 6 08:14:14 gvs3 kernel: Inspecting /boot/System.map-2 (See http://map-2.ora-code.com).4.2-2
> Apr 6 08:14:14 gvs3 portmap: portmap startup succeeded
> Apr 6 08:14:14 gvs3 kernel: Loaded 14301 symbols from
> /boot/System.map-2 (See http://map-2.ora-code.com).4.2-2.
> Apr 6 08:14:14 gvs3 kernel: Symbols match kernel version 2.4.2.
> Apr 6 08:14:14 gvs3 kernel: Loaded 697 symbols from 12 modules.
> Apr 6 08:14:14 gvs3 kernel: Linux version 2.4.2-2
> (root@(protected)) (gcc version 2.96 20000731 (Red Hat Linux
> 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
> Apr 6 08:14:14 gvs3 kernel: BIOS-provided physical RAM map:
> Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 000000000009fc00 @
> 0000000000000000 (usable)
> Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 0000000000000400 @
> 000000000009fc00 (reserved)
> Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 0000000000010000 @
> 00000000000f0000 (reserved)
> Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 0000000007700000 @
> 0000000000100000 (usable)
> Apr 6 08:14:14 gvs3 kernel: BIOS-e820: 0000000000080000 @
> 00000000fff80000 (reserved)
> Apr 6 08:14:14 gvs3 kernel: On node 0 totalpages: 30720
> Apr 6 08:14:14 gvs3 kernel: zone(0): 4096 pages.
> Apr 6 08:14:14 gvs3 kernel: zone DMA has max 32 cached pages.
> Apr 6 08:14:14 gvs3 kernel: zone(1): 26624 pages.
> Apr 6 08:14:14 gvs3 kernel: zone Normal has max 208 cached pages.
> Apr 6 08:14:14 gvs3 kernel: zone(2): 0 pages.
> Apr 6 08:14:14 gvs3 kernel: zone HighMem has max 1 cached pages.
> Apr 6 08:14:14 gvs3 nfslock: rpc.statd startup succeeded
> Apr 6 08:14:14 gvs3 kernel: hm, page 01000000 reserved twice.
> Apr 6 08:14:14 gvs3 kernel: Kernel command line: auto
> BOOT_IMAGE=linux-up ro root=807 BOOT_FILE=/boot/vmlinuz-2 (See http://nuz-2.ora-code.com).4.2-2
> hda=ide-scsi
> Apr 6 08:14:14 gvs3 kernel: ide_setup: hda=ide-scsi
> Apr 6 08:14:14 gvs3 kernel: Initializing CPU#0
> Apr 6 08:14:14 gvs3 kernel: Detected 853.865 MHz processor.
> Apr 6 08:14:14 gvs3 kernel: Console: colour VGA+ 80x25
> Apr 6 08:14:14 gvs3 kernel: Calibrating delay loop... 1703.93 BogoMIPS
> Apr 6 08:14:14 gvs3 kernel: Memory: 118064k/122880k available (1365k
> kernel code, 4428k reserved, 92k data, 236k init, 0k highmem)
> Apr 6 08:14:14 gvs3 kernel: Dentry-cache hash table entries: 16384
> (order: 5, 131072 bytes)
> Apr 6 08:14:14 gvs3 kernel: Buffer-cache hash table entries: 4096
> (order: 2, 16384 bytes)
> Apr 6 08:14:14 gvs3 kernel: Page-cache hash table entries: 32768
> (order: 6, 262144 bytes)
> Apr 6 08:14:14 gvs3 kernel: Inode-cache hash table entries: 8192
> (order: 4, 65536 bytes)
> Apr 6 08:14:14 gvs3 kernel: VFS: Diskquotas version dquot_6.5.0
> initialized
> Apr 6 08:14:14 gvs3 kernel: CPU: Before vendor init, caps: 0383f9ff
> 00000000 00000000, vendor = 0
> Apr 6 08:14:14 gvs3 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
> Apr 6 08:14:14 gvs3 kernel: CPU: L2 cache: 128K
> Apr 6 08:14:14 gvs3 kernel: Intel machine check architecture supported.
>
> Apr 6 08:14:14 gvs3 kernel: Intel machine check reporting enabled on
> CPU#0.
> Apr 6 08:14:14 gvs3 kernel: CPU: After vendor init, caps: 0383f9ff
> 00000000 00000000 00000000
> Apr 6 08:14:14 gvs3 kernel: CPU: After generic, caps: 0383f9ff 00000000
> 00000000 00000000
> Apr 6 08:14:14 gvs3 kernel: CPU: Common caps: 0383f9ff 00000000
> 00000000 00000000
> Apr 6 08:14:14 gvs3 kernel: CPU: Intel Celeron (Coppermine) stepping 0a
>
> Apr 6 08:14:14 gvs3 kernel: Enabling fast FPU save and restore... done.
>
> Apr 6 08:14:14 gvs3 kernel: Enabling unmasked SIMD FPU exception
> support... done.
> Apr 6 08:14:14 gvs3 kernel: Checking 'hlt' instruction... OK.
> Apr 6 08:14:14 gvs3 kernel: POSIX conformance testing by UNIFIX
> Apr 6 08:14:14 gvs3 kernel: mtrr: v1.37 (20001109) Richard Gooch
> (rgooch@(protected))
> Apr 6 08:14:14 gvs3 kernel: mtrr: detected mtrr type: Intel
> Apr 6 08:14:14 gvs3 rpc.statd[1029]: Version 0.3.1 Starting
> Apr 6 08:14:14 gvs3 kernel: PCI: PCI BIOS revision 2.10 entry at
> 0xfdb51, last bus=1
> Apr 6 08:14:14 gvs3 kernel: PCI: Using configuration type 1
> Apr 6 08:14:14 gvs3 kernel: PCI: Probing PCI hardware
> Apr 6 08:14:14 gvs3 kernel: PCI: Using IRQ router VIA [1106/0686] at
> 00:07.0
> Apr 6 08:14:14 gvs3 kernel: isapnp: Scanning for PnP cards...
> Apr 6 08:14:14 gvs3 kernel: isapnp: No Plug & Play device found
> Apr 6 08:14:15 gvs3 keytable: Loading keymap:
> Apr 6 08:14:15 gvs3 kernel: Linux NET4.0 for Linux 2.4
> Apr 6 08:14:15 gvs3 kernel: Based upon Swansea University Computer
> Society NET3.039
> Apr 6 08:14:15 gvs3 kernel: Initializing RT netlink socket
> Apr 6 08:14:15 gvs3 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
> version 1.14)
> Apr 6 08:14:15 gvs3 kernel: Starting kswapd v1.8
> Apr 6 08:14:15 gvs3 kernel: pty: 256 Unix98 ptys configured
> Apr 6 08:14:15 gvs3 kernel: block: queued sectors max/low
> 78301kB/26100kB, 256 slots per queue
> Apr 6 08:14:15 gvs3 kernel: RAMDISK driver initialized: 16 RAM disks of
> 4096K size 1024 blocksize
> Apr 6 08:14:15 gvs3 kernel: Uniform Multi-Platform E-IDE driver
> Revision: 6.31
> Apr 6 08:14:15 gvs3 kernel: ide: Assuming 33MHz system bus speed for
> PIO modes; override with idebus=xx
> Apr 6 08:14:15 gvs3 kernel: VP_IDE: IDE controller on PCI bus 00 dev 39
>
> Apr 6 08:14:15 gvs3 kernel: VP_IDE: chipset revision 6
> Apr 6 08:14:15 gvs3 kernel: VP_IDE: not 100%% native mode: will probe
> irqs later
> Apr 6 08:14:15 gvs3 kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100
> controller on pci00:07.1
> Apr 6 08:14:15 gvs3 kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS
> settings: hda:DMA, hdb:pio
> Apr 6 08:14:15 gvs3 kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS
> settings: hdc:pio, hdd:pio
> Apr 6 08:14:15 gvs3 kernel: PDC20267: IDE controller on PCI bus 00 dev
> 70
> Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 5 for device 00:0e.0
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.3
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.2
> Apr 6 08:14:15 gvs3 kernel: PDC20267: chipset revision 2
> Apr 6 08:14:15 gvs3 kernel: PDC20267: not 100%% native mode: will probe
> irqs later
> Apr 6 08:14:15 gvs3 kernel: PDC20267: ROM enabled at 0xdffd0000
> Apr 6 08:14:15 gvs3 kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary
> MASTER Mode Secondary MASTER Mode.
> Apr 6 08:14:15 gvs3 kernel: PDC20267: neither IDE port enabled (BIOS)
> Apr 6 08:14:15 gvs3 kernel: hda: PIONEER DVD-RW DVR-106 (See http://DVR-106.ora-code.com)D, ATAPI
> CD/DVD-ROM drive
> Apr 6 08:14:15 gvs3 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Apr 6 08:14:15 gvs3 kernel: Floppy drive(s): fd0 is 1.44M
> Apr 6 08:14:15 gvs3 kernel: FDC 0 is a post-1991 (See http://ost-1991.ora-code.com) 82077
> Apr 6 08:14:15 gvs3 kernel: RAMDISK: Compressed image found at block 0
> Apr 6 08:14:15 gvs3 kernel: Freeing initrd memory: 353k freed
> Apr 6 08:14:15 gvs3 kernel: Serial driver version 5.02 (2000-08-09)
> with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
> Apr 6 08:14:15 gvs3 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
> Apr 6 08:14:15 gvs3 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Apr 6 08:14:15 gvs3 kernel: Real Time Clock Driver v1.10d
> Apr 6 08:14:15 gvs3 kernel: md driver 0.90.0 MAX_MD_DEVS=256,
> MD_SB_DISKS=27
> Apr 6 08:14:15 gvs3 kernel: md.c: sizeof(mdp_super_t) = 4096
> Apr 6 08:14:15 gvs3 kernel: autodetecting RAID arrays
> Apr 6 08:14:15 gvs3 kernel: autorun ...
> Apr 6 08:14:15 gvs3 kernel: ... autorun DONE.
> Apr 6 08:14:15 gvs3 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
> Apr 6 08:14:15 gvs3 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
> Apr 6 08:14:15 gvs3 kernel: IP: routing cache hash table of 512
> buckets, 4Kbytes
> Apr 6 08:14:15 gvs3 kernel: TCP: Hash tables configured (established
> 8192 bind 8192)
> Apr 6 08:14:15 gvs3 kernel: Linux IP multicast router 0.06 plus PIM-SM
> Apr 6 08:14:15 gvs3 kernel: NET4: Unix domain sockets 1.0/SMP for Linux
> NET4.0.
> Apr 6 08:14:15 gvs3 kernel: VFS: Mounted root (ext2 filesystem).
> Apr 6 08:14:15 gvs3 kernel: SCSI subsystem driver Revision: 1.00
> Apr 6 08:14:15 gvs3 kernel: PROMISE FastTrak Series Linux Driver
> Version 1.02.0.22
> Apr 6 08:14:15 gvs3 kernel: spurious 8259A interrupt: IRQ7.
> Apr 6 08:14:15 gvs3 kernel: scsi0 : FastTrak
> Apr 6 08:14:15 gvs3 kernel: Vendor: Promise Model: 1X2
> Mirror/RAID1 Rev: 1.10
> Apr 6 08:14:15 gvs3 kernel: Type:
> Direct-Access ANSI SCSI revision: 02
> Apr 6 08:14:15 gvs3 kernel: Attached scsi disk sda at scsi0, channel 0,
> id 0, lun 0
> Apr 6 08:14:15 gvs3 kernel: SCSI device sda: 160086465 512-byte hdwr
> sectors (81964 MB)
> Apr 6 08:14:15 gvs3 kernel: Partition check:
> Apr 6 08:14:15 gvs3 kernel: sda: sda1 sda2 < sda5 sda6 sda7 >
> Apr 6 08:14:15 gvs3 kernel: VFS: Mounted root (ext2 filesystem)
> readonly.
> Apr 6 08:14:15 gvs3 kernel: change_root: old root has d_count=3
> Apr 6 08:14:15 gvs3 kernel: Trying to unmount old root ... okay
> Apr 6 08:14:15 gvs3 kernel: Freeing unused kernel memory: 236k freed
> Apr 6 08:14:15 gvs3 kernel: Adding Swap: 369452k swap-space (priority
> -1)
> Apr 6 08:14:15 gvs3 kernel: usb.c: registered new driver usbdevfs
> Apr 6 08:14:15 gvs3 kernel: usb.c: registered new driver hub
> Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: $Revision: 1.251 $ time
> 20:53:29 Apr 8 2001
> Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: High bandwidth mode enabled
> Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 5 for device 00:07.3
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.2
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:0e.0
> Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 5
> Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: Detected 2 ports
> Apr 6 08:14:15 gvs3 kernel: usb.c: new USB bus registered, assigned bus
> number 1
> Apr 6 08:14:15 gvs3 kernel: hub.c: USB hub found
> Apr 6 08:14:15 gvs3 kernel: hub.c: 2 ports detected
> Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 5 for device 00:07.2
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.3
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:0e.0
> Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: USB UHCI at I/O 0xac00, IRQ 5
> Apr 6 08:14:15 gvs3 kernel: usb-uhci.c: Detected 2 ports
> Apr 6 08:14:15 gvs3 kernel: usb.c: new USB bus registered, assigned bus
> number 2
> Apr 6 08:14:15 gvs3 kernel: hub.c: USB hub found
> Apr 6 08:14:15 gvs3 kernel: hub.c: 2 ports detected
> Apr 6 08:14:15 gvs3 kernel: scsi1 : SCSI host adapter emulation for IDE
> ATAPI devices
> Apr 6 08:14:15 gvs3 kernel: Vendor: PIONEER Model: DVD-RW
> DVR-106 (See http://DVR-106.ora-code.com)D Rev: 1.07
> Apr 6 08:14:15 gvs3 kernel: Type:
> CD-ROM ANSI SCSI revision: 02
> Apr 6 08:14:15 gvs3 kernel: Winbond Super-IO detection, now testing
> ports 3F0,370,250,4E,2E ...
> Apr 6 08:14:15 gvs3 kernel: SMSC Super-IO detection, now testing Ports
> 2F0, 370 ...
> Apr 6 08:14:15 gvs3 kernel: 0x378: FIFO is 16 bytes
> Apr 6 08:14:15 gvs3 kernel: 0x378: writeIntrThreshold is 8
> Apr 6 08:14:15 gvs3 kernel: 0x378: readIntrThreshold is 8
> Apr 6 08:14:15 gvs3 kernel: 0x378: possible IRQ conflict!
> Apr 6 08:14:15 gvs3 kernel: parport0: PC-style at 0x378 (0x778), irq 7
> [PCSPP,TRISTATE,COMPAT,ECP]
> Apr 6 08:14:15 gvs3 kernel: parport_pc: Via 686A parallel port:
> io=0x378, irq=7
> Apr 6 08:14:15 gvs3 kernel: ip_conntrack (960 buckets, 7680 max)
> Apr 6 08:14:15 gvs3 kernel: NET4: Linux IPX 0.46 for NET4.0
> Apr 6 08:14:15 gvs3 kernel: IPX Portions Copyright (c) 1995 Caldera,
> Inc.
> Apr 6 08:14:15 gvs3 kernel: IPX Portions Copyright (c) 2000, 2001
> Conectiva, Inc.
> Apr 6 08:14:15 gvs3 kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> Apr 6 08:14:15 gvs3 kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17
> Modified by Andrey V. Savochkin <saw@(protected)> and others
> Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 10 for device 00:0f.0
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.5
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:13.0
> Apr 6 08:14:15 gvs3 kernel: eth0: Intel Corporation 82557 [Ethernet Pro
> 100], 00:08:9B:06:05:4C, I/O at 0xa800, IRQ 10.
> Apr 6 08:14:15 gvs3 kernel: Board assembly 729757-006, Physical
> connectors present: RJ45
> Apr 6 08:14:15 gvs3 kernel: Primary interface chip i82555 PHY #1.
> Apr 6 08:14:15 gvs3 kernel: General self-test: passed.
> Apr 6 08:14:15 gvs3 kernel: Serial sub-system self-test: passed.
> Apr 6 08:14:15 gvs3 kernel: Internal registers self-test: passed.
> Apr 6 08:14:15 gvs3 kernel: ROM checksum self-test: passed
> (0x04f4518b).
> Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 10 for device 00:10.0
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:14.0
> Apr 6 08:14:15 gvs3 kernel: eth1: Intel Corporation 82557 [Ethernet Pro
> 100] (#2), 00:08:9B:06:05:4D, I/O at 0xa400, IRQ 10.
> Apr 6 08:14:15 gvs3 kernel: Board assembly 729757-006, Physical
> connectors present: RJ45
> Apr 6 08:14:15 gvs3 kernel: Primary interface chip i82555 PHY #1.
> Apr 6 08:14:15 gvs3 kernel: General self-test: passed.
> Apr 6 08:14:15 gvs3 kernel: Serial sub-system self-test: passed.
> Apr 6 08:14:15 gvs3 kernel: Internal registers self-test: passed.
> Apr 6 08:14:15 gvs3 kernel: ROM checksum self-test: passed
> (0x04f4518b).
> Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 10 for device 00:13.0
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:07.5
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:0f.0
> Apr 6 08:14:15 gvs3 kernel: 3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker
> and others. http://www.scyld.com/network/vortex.html
> Apr 6 08:14:15 gvs3 kernel: See Documentation/networking/vortex.txt
> Apr 6 08:14:15 gvs3 kernel: eth2: 3Com PCI 3c905 Boomerang 100baseTx at
> 0xa000, 00:60:08:1d:5e:6f, IRQ 10
> Apr 6 08:14:15 gvs3 kernel: product code 4b4b rev 00.0 date 12-28-95
> Apr 6 08:14:15 gvs3 kernel: 8K word-wide RAM 3:5 Rx:Tx split,
> autoselect/MII interface.
> Apr 6 08:14:15 gvs3 kernel: MII transceiver found at address 24,
> status 786f.
> Apr 6 08:14:15 gvs3 kernel: Enabling bus-master transmits and
> whole-frame receives.
> Apr 6 08:14:15 gvs3 kernel: eth2: scatter/gather disabled. h/w
> checksums disabled
> Apr 6 08:14:15 gvs3 kernel: PCI: Found IRQ 10 for device 00:14.0
> Apr 6 08:14:15 gvs3 kernel: PCI: The same IRQ used for device 00:10.0
> Apr 6 08:14:15 gvs3 kernel: eth3: 3Com PCI 3c905C Tornado at 0x9c00,
> 00:01:02:f6:d2:39, IRQ 10
> Apr 6 08:14:15 gvs3 kernel: product code 4552 rev 00.13 date 11-27-00
>
> Apr 6 08:14:15 gvs3 kernel: Full duplex capable
> Apr 6 08:14:15 gvs3 kernel: 8K byte-wide RAM 5:3 Rx:Tx split,
> autoselect/Autonegotiate interface.
> Apr 6 08:14:15 gvs3 kernel: MII transceiver found at address 24,
> status 7809.
> Apr 6 08:14:15 gvs3 kernel: Enabling bus-master transmits and
> whole-frame receives.
> Apr 6 08:14:15 gvs3 kernel: eth3: scatter/gather disabled. h/w
> checksums enabled
> Apr 6 08:14:15 gvs3 kernel: eth2: first available media type: MII
> Apr 6 08:14:15 gvs3 kernel: eth3: using NWAY device table, not 8
> Apr 6 08:14:15 gvs3 keytable:
> Apr 6 08:14:15 gvs3 rc: Starting keytable: succeeded
> Apr 6 08:14:15 gvs3 rc: Starting pcmcia: succeeded
> Apr 6 08:14:15 gvs3 random: Initializing random number generator:
> succeeded
> Apr 6 08:14:15 gvs3 mount: [mntent]: warning: no final newline at the
> end of /etc/fstab
> Apr 6 08:14:15 gvs3 netfs: Mounting other filesystems: succeeded
> Apr 6 08:14:15 gvs3 apmd[1129]: Version 3.0final (APM BIOS 1.2, Linux
> driver 1.14)
> Apr 6 08:14:15 gvs3 apmd: apmd startup succeeded
> Apr 6 08:14:15 gvs3 apmd[1129]: Charge: * * * (-1% unknown)
> Apr 6 08:14:15 gvs3 autofs: autofs startup succeeded
> Apr 6 08:14:15 gvs3 automount[1178]: starting automounter version
> 3.1.7, path = /misc, maptype = file, mapname = /etc/auto.misc
> Apr 6 08:14:16 gvs3 atd: atd startup succeeded
> Apr 6 08:14:16 gvs3 sshd: Starting sshd:
> Apr 6 08:14:16 gvs3 automount[1178]: using kernel protocol version 3
> Apr 6 08:14:16 gvs3 sshd: succeeded
> Apr 6 08:14:16 gvs3 sshd:
> Apr 6 08:14:16 gvs3 rc: Starting sshd: succeeded
> Apr 6 08:14:17 gvs3 xinetd[1225]: amandaidx disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: time disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: time disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: tftp disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: telnet disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: talk disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: swat disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: rsync disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: shell disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: login disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: exec disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: pop3s disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: ntalk disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: amidxtape disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: kshell disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: telnet disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: klogin disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: pop3 disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: pop2 disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: imaps disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: chargen disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: ftp disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: finger disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: eklogin disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: echo-udp disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: echo disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: skkserv disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: daytime-udp disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: chargen-udp disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: comsat disabled, removing
> Apr 6 08:14:17 gvs3 xinetd[1225]: xinetd Version 2.1.8.9pre14 started
> with
> Apr 6 08:14:17 gvs3 xinetd[1225]: libwrap
> Apr 6 08:14:17 gvs3 xinetd[1225]: options compiled in.
> Apr 6 08:14:17 gvs3 xinetd[1225]: Started working: 4 available services
>
> Apr 6 08:14:19 gvs3 /etc/hotplug/usb.agent: ... no drivers for USB
> product 0/0/0
> Apr 6 08:14:19 gvs3 /etc/hotplug/usb.agent: ... no drivers for USB
> product 0/0/0
> Apr 6 08:14:19 gvs3 xinetd: xinetd startup succeeded
> Apr 6 08:14:19 gvs3 nwserv:
> Apr 6 08:14:19 gvs3 nwserv:
> Apr 6 08:14:19 gvs3 nwserv: Mars_nwe V0.99pl19 started using
> /etc/nwserv.conf.
> Apr 6 08:14:19 gvs3 nwserv: If you have problems, please read
> mars_nwe/doc/BUGS !
> Apr 6 08:14:19 gvs3 nwserv: Errors/warnings will be reported in
> /var/log/mars_nwe.log
> Apr 6 08:14:19 gvs3 nwserv:
> Apr 6 08:14:19 gvs3 nwserv:
> Apr 6 08:14:20 gvs3 mars-nwe: nwserv startup succeeded
> Apr 6 08:14:21 gvs3 gpm: gpm startup succeeded
> Apr 6 08:14:23 gvs3 httpd: httpd startup succeeded
> Apr 6 08:14:23 gvs3 mcserv: mcserv startup succeeded
> Apr 6 08:14:23 gvs3 FreeWnn: Starting FreeWnn:
> Apr 6 08:14:24 gvs3 FreeWnn:
> Apr 6 08:14:24 gvs3 rc: Starting FreeWnn: succeeded
> Apr 6 08:14:24 gvs3 crond: crond startup succeeded
> Apr 6 08:14:25 gvs3 xfs: listening on port 7100
> Apr 6 08:14:25 gvs3 xfs: xfs startup succeeded
> Apr 6 08:14:26 gvs3 anacron: anacron startup succeeded
> Apr 6 08:14:27 gvs3 linuxconf: Running Linuxconf hooks: succeeded
> Apr 6 08:14:28 gvs3 rc: Starting webmin: succeeded
> Apr 6 08:14:49 gvs3 kde(pam_unix)[1497]: session opened for user root
> by (uid=0)
> Apr 6 08:14:56 gvs3 kernel: Via 686a audio driver 1.1.14b
> Apr 6 08:14:56 gvs3 kernel: PCI: Found IRQ 10 for device 00:07.5
> Apr 6 08:14:56 gvs3 kernel: PCI: The same IRQ used for device 00:0f.0
> Apr 6 08:14:56 gvs3 kernel: PCI: The same IRQ used for device 00:13.0
> Apr 6 08:14:56 gvs3 kernel: ac97_codec: AC97 Audio codec, id:
> 0x414c:0x4710 (ALC200/200P)
> Apr 6 08:14:56 gvs3 kernel: via82cxxx: board #1 at 0xBC00, IRQ 10
> Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
> sound-service-0 (See http://ice-0.ora-code.com)-0
> Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
> sound-slot-1 (See http://lot-1.ora-code.com)
> Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
> sound-service-1 (See http://ice-1.ora-code.com)-0
> Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
> sound-slot-1 (See http://lot-1.ora-code.com)
> Apr 6 08:14:56 gvs3 modprobe: modprobe: Can't locate module
> sound-service-1 (See http://ice-1.ora-code.com)-0
> Apr 6 08:14:59 gvs3 kernel: IPX: Network number collision 2
> Apr 6 08:14:59 gvs3 kernel: eth1 802.2 and eth0 802.3
> Apr 6 08:15:00 gvs3 kernel: IPX: Network number collision 2
> Apr 6 08:15:00 gvs3 kernel: eth1 802.2 and eth0 802.3
> Apr 6 08:15:56 gvs3 kernel: IPX: Network number collision 2
> Apr 6 08:15:56 gvs3 kernel: eth1 802.2 and eth0 802.3
> Apr 6 08:16:28 gvs3 kernel: IPX: Network number collision 2
> Apr 6 08:16:28 gvs3 kernel: eth1 802.2 and eth0 802.3
> Apr 6 08:16:33 gvs3 kernel: IPX: Network number collision 2
> Apr 6 08:16:33 gvs3 kernel: eth1 802.2 and eth0 802.3
> Apr 6 08:16:38 gvs3 kernel: Attached scsi CD-ROM sr0 at scsi1, channel
> 0, id 0, lun 0
> Apr 6 08:16:38 gvs3 kernel: sr0: scsi3-mmc drive: 47x/47x writer cd/rw
> xa/form2 cdda tray
> Apr 6 08:16:38 gvs3 kernel: Uniform CD-ROM driver Revision: 3.12
> Apr 6 08:16:38 gvs3 kernel: attempt to access beyond end of device
> Apr 6 08:16:38 gvs3 kernel: 0b:00: rw=0, want=34, limit=2
> Apr 6 08:16:38 gvs3 kernel: isofs_read_super: bread failed, dev=0b:00,
> iso_blknum=16, block=16
> Apr 6 08:16:38 gvs3 kernel: attempt to access beyond end of device
> Apr 6 08:16:38 gvs3 kernel: 0b:00: rw=0, want=34, limit=2
> Apr 6 08:16:38 gvs3 kernel: isofs_read_super: bread failed, dev=0b:00,
> iso_blknum=16, block=16
> Apr 6 08:17:04 gvs3 modprobe: modprobe: Can't locate module
> char-major-97 (See http://jor-97.ora-code.com)
>
> # cdrecord --scanbus
> scsibus0:
> 0,0,0 0) 'Promise ' '1x2 Mirror/RAID1'
> '1.10' Disk
> 0,1,0 1) *
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
> scsibus1:
> 1,0,0 100) 'PIONEER ' 'DVD-RW DVR-106 (See http://DVR-106.ora-code.com)D'
> '1.07' Removable CD-ROM
> 1,1,0 101) *
> 1,2,0 102) *
> 1,3,0 103) *
> 1,4,0 104) *
> 1,5,0 105) *
> 1,6,0 106) *
> 1,7,0 107) *
>
> # lsmod
> Module Size
> Used by
> sg
> 26688 0 (autoclean)
> sr_mod
> 15264 0 (autoclean)
> via82cxxx_audio 17552 0
> (autoclean)
> ac97_codec 8800
> 0 (autoclean) [via82cxxx_audio]
> soundcore
> 4464 2 (autoclean) [via82cxxx_audio]
> autofs
> 11264 1 (autoclean)
> 3c59x
> 25344 2 (autoclean)
> eepro100
> 16624 2 (autoclean)
> ipx
> 15520 18 (autoclean)
> ipchains
> 38976 0 (unused)
> ide-scsi
> 8352 0
> ide-cd
> 26848 0
> cdrom
> 27232 0 [sr_mod ide-cd]
> usb-uhci
> 20720 0 [unused]
> usbcore
> 49664 1 [usb-uhci]
> FastTrak
> 86784 4
> sd_mod
> 11680 4
> scsi_mod
> 95072 5 [sg sr_mod ide-scsi FastTrak sd_mod]
>
> #scsi_info /dev/sr0
> SCSI_ID="0,0,0"
> MODEL="PIONEER DVD-RW DVR-106 (See http://DVR-106.ora-code.com)D"
> FW_REV="1.07"
>
> # /etc/fstab
> /dev/sr0 /mnt/dvd iso9660 noauto,user,ro 0 0
>
> Can anybody help me?
> Appreciate any help.
> Many thanks.
>
>
>
> __ ____ ____ ____ ____ ____ ____ ____ ____ ____
> enigma-list mailing list
> enigma-list@(protected)
> https://www.redhat.com/mailman/listinfo/enigma-list
--
Timothy Beck <tbeck@(protected)>
__ ____ ____ ____ ____ ____ ____ ____ ____ ____
enigma-list mailing list
enigma-list@(protected)
https://www.redhat.com/mailman/listinfo/enigma-list
|
|
|