 | | | Settings in /etc/sysconfig/harddisks for this drive | Settings in /etc/sysconfig/harddisks for this drive 2004-04-21 - By Michael St. Laurent
Back
What would be the best settings to use in the /etc/sysconfig/harddisks file
for high performance for the following disk drive:
# hdparm -I /dev/hda
/dev/hda:
non-removable ATA device, with non-removable media
Model Number: Maxtor 5T060H6
Serial Number: T6H65RBC
Firmware Revision: TAH71DP0
Standards:
Supported: 1 2 3 4 5 6
Likely used: 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
bytes/track: 0 (obsolete)
bytes/sector: 0 (obsolete)
current sector capacity: 16514064
LBA user addressable sectors = 120103200
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 2048.0kB ECC bytes: 57 Queue depth: 1
Standby timer values: spec'd by standard, no device specific minimum
r/w multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* look-ahead
* write cache
* Power Management feature set
* SMART feature set
SET MAX security extension
Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL
Checksum: correct
--
Michael St. Laurent
Hartwell Corporation
--
Shrike-list mailing list
Shrike-list@(protected)
https://www.redhat.com/mailman/listinfo/shrike-list
Earn $52 per hosting referral at Lunarpages.
|
|
|