SCSI tape drive not seen in FC1? 2004-06-23 - By Hongwei Li
Back
Hi,
It seems that the fedora-list is not working -- maybe I am wrong, but I
don't see any message from the list including my posts and never got any
reply (I have registered with it a while ago). So, I post it here. If I
am wrong, please forgive me. I appreciate any help!
Here is my problem:
We have installed FC1 on a new Dell P4 3Ghz pc. Everything runs well
except that the scsi tape drive is not seen from fc1. When I boot the pc,
the motherboard detects the scsi card and the scsi card detects the tape
drive (this DDS4 is the only scsi device in this pc):
AHA-2940 (See http://AHA-2940.ora-code.com)UW v.2.11.0 ...
SCSI ID: 2 SONY SDT-11000 (See http://SDT-11000.ora-code.com)
Then, the fc1 starts booting and I don't see any information about it.
After fc1 is started, I checked:
# dmesg | grep scsi
scsi0 : ata_piix
scsi1 : ata_piix
but, no output from:
# dmesg | grep st0
# dmesg | grep st1
If I run:
# /bin/mt -f /dev/st0 rewind
/dev/st0: No such device
I go to KDE -- Hardware Browser -- SCSI Devices, it shows:
AHA 2940UW Pro/AIC-7888 (See http://AIC-7888.ora-code.com)x
but no device is displayed. I go to KDE -- Cotrol Center -- Information
-- SCSI, it shows: "Attached devises: none"
This tape drive was used in our another rh7.3 linux very well until I took
it out from that system and installed in this fc1 a few days ago.
The motherboard can see it, but fc1 can only see the scsi card, not the
tape drive. Can somebody tell me why? how to fix the problem? Is there
anything else I should do?
Thanks a lot!
Hongwei Li
__ ____ ____ ____ ____ ____ ____ ____ ____ ____
Valhalla-list mailing list
Valhalla-list@(protected)
https://www.redhat.com/mailman/listinfo/valhalla-list
|
|
