 | | | GRUB kernel boot error - RH9 | GRUB kernel boot error - RH9 2005-01-28 - By Wayne Watson
Back
Interesting that the above title appears nowhere else in any message I've
received recently in this NG. Are you submitting messages directly to the NG?
akonstam@(protected) wrote:
> On Wed, Jan 26, 2005 at 07:25:39PM -0800, Aldo Foot wrote:
>
>>Hello,
>>
>>I have a box to dual boot Win2k and RedHat9. The PC has two HDDs,
>>Win2k installed in the master HDD (hda) and LINUX in the slave
>>disk (hdb1). The system boots with GRUB.
>>
>>I'm currently running on kernel 2.4.20-6 but wanted to
>>upgrade to 2.6.10. The kernel compiled and all the appropriate
>>files were created and set in place.
>>Please see at the end of message for files listed in /boot.
>>
>>I thought this grub problem would be fixed in 2.6.10, but is not.
>>Unfortunately I cannot switch to lilo because the RH install is in the
>>second disk and I get an error when running /bin/lilo.
>
> That should not be happening. Lilo should be runnable. Just how are you
> trying to run it? See below the lilo boot block should be put on
> /dev/hda.
>
>>Any ideas will be appreciated. Thanks in advanced.
>>
>>-af
>>
>>=========================================================================
>>DETAILS
>>
>>In the grub.conf file I have entries for the original kernel 2.4.20-6 and
>>for win2k, and they both boot fine, and an entry for the new kernwl 2.6.10.
>>
>>My grub.conf looks like this:
>>
>>#boot=/dev/hdb1
>>default=1
>>timeout=10
>>splashimage=(hd1,0)/boot/grub/splash.xpm.gz
>>title RH26
>> root (hd1,0)
>> kernel /boot/vmlinuz-2 (See http://nuz-2.ora-code.com).6.10 ro root=LABEL=/ hdc=ide-scsi
>> initrd /boot/initrd-2 (See http://trd-2.ora-code.com).6.10.img
>>title Red Hat Linux (2.4.20-6)
>> root (hd1,0)
>> kernel /boot/vmlinuz-2 (See http://nuz-2.ora-code.com).4.20-6 ro root=LABEL=/ hdc=ide-scsi
>> initrd /boot/initrd-2 (See http://trd-2.ora-code.com).4.20-6.img
>>title DOS
>> rootnoverify (hd0,0)
>> chainloader +1
>>.........................
>>
>>My problem is when tryng to boot with kernel 2.6.10, The system hangs
>>with this message:
>>
>>Kernel panic - not syncing: No init found. Try passing init= option to
>>kernel
>>
>>So I booted with a floppy and did this
>>boot: linux init=/sbin/init root=/dev/hdb1 <enter>
>>
> This error almost always results when the kernel and initrd file is
> not on the device that the fstab says it is on. I can't see why the two
> kernels would be different in the regard but is /dev/hdb1 called
> LABEL=/ in the fstab?
> Just as in lilo did you put the grub boot blocks on /hda,
> Like: grub-install /dev/hda
>
>>But got the same error. What am I missing?
>>
>>........
>>Things I've tried
>>-o- created fresh initrd.img: done the mkinitrd -f -v
>>initrd-kernelversion.img kernelversion
>>-o- create new boot floppy: mkbootdisk --device /dev/fd0 2.6.10
>>-o- tried /bin/lilo to replace grub, but got error
>>"Warning: /dev/hdb1 is not on the first disk
>> Fatal : sector 20196056 too large for linear mode (try 'lba32'instead)
>
> Why did you not put the lilo boot block on /dev/hda?
>
--
Wayne T. Watson (Watson Adventures, Prop., Nevada City, CA)
(121.015 Deg. W, 39.262 Deg. N) GMT-8 (See http://GMT-8.ora-code.com) hr std. time)
Obz Site: 39?? 15' 7" N, 121?? 2' 32" W, 2700 feet
Most vehicle/deer accidents occur at sunset.
Vehicle deer whistles are ineffective.
Web Page: <home.earthlink.net/~mtnviews>
--
Shrike-list mailing list
Shrike-list@(protected)
https://www.redhat.com/mailman/listinfo/shrike-list
|
|
|