 | | | ES 3 and FireWire problems. | ES 3 and FireWire problems. 2005-02-09 - By Naoki
Back
Hi all,
RH ES3 Update 4 box with the 'unsupported' modules added.. Controller
is fine, however the plugged in powered up disks are not seen.
#cat /proc/scsi/sbp2_0/1
Host scsi1 : SBP-2 IEEE-1394 (ohci1394)
Driver version : $Rev: 906 $ James Goodwin <jamesg@(protected)>
Module options :
max_speed : S800
max_sectors : 255
serialize_io : no
exclusive_login : no
Attached devices : none
The disks are seen by a Mac so I doubt the array is toasted.
Any pointers? No obvious errors in the log :
SCSI device sda: 35548320 512-byte hdwr sectors (18201 MB)
Partition check:
sda: sda1 sda2 sda3
ohci1394: $Rev: 896 $ Ben Collins <bcollins@(protected)>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[efffe800-efffefff] Max
Packet=[2048]
scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices
blk: queue c4b5ea14, I/O limit 4095Mb (mask 0xffffffff)
ieee1394: Host added: Node[00:1023] GUID[004026010601f500] [Linux
OHCI-1394]
Scsi bus scan shows nothing except the local adaptec scsi :
# ./rescan-scsi-bus.sh
Host adapter 0 (aic7xxx) found.
Host adapter 1 (sbp2_0) found.
Scanning hosts 0 1 channels 0 for
SCSI target IDs 0 1 2 3 4 5 6 7 , LUNs 0
Scanning for device 0 0 0 0 ...
OLD: Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM-ESXS Model: MAN3184MC F Rev: 5408
Type: Direct-Access ANSI SCSI revision: 03
0 new device(s) found.
0 device(s) removed.
Same result with the Oracle supplied kernel. doh.
--
Taroon-list mailing list
Taroon-list@(protected)
http://www.redhat.com/mailman/listinfo/taroon-list
Earn $52 per hosting referral at Lunarpages.
|
|
|