 | | | linux-2.6.10 boot up but hang up locally | linux-2.6.10 boot up but hang up locally 2005-05-09 - By Igor Nestorovi
Back
Is it a vanilla kernel, or have you found somewhere precompiled 2.6
kernel package for the Shrike?
? pet, 06. 05. 2005. ? 23:32 +0800, Frank ??????:
> Hi, alll,
>
> My system iformation given by uname is as follows:
>
> Linux info218 2.6.10 #1 SMP Thu May 5 22:14:28 CST 2005 i686 athlon i386
> GNU/Linux
>
> Yesterday, I updated my Kernel from 2.4.20 to 2.6.10. It works and I
> have worked under new Kernel for one day. However, a problem occurs
> today after I reboot the system.
>
> However, the operating system(redhat 9) is working!! because I can acess
> the system via SSH. I can install program, use vi, etc via SSH from
> another computer. BUT, I can not use the computer locally because the
> screen of the computer always stop at the above line "Kernel command
> line: ro root=/dev/hdb5 elevator deadline" .
> This looks that the linux is boot up. And the system is ok, because I
> use it by remote login from other computer. But it hang up locally:-(.
>
> Here is the dmesg informations I get by remote login. The local
> screen stop at the l ine: Kernel command line: ro root=/LABEL=/
> elevator deadline.
> I spend all the day on this question and google the answer. I can do
> nothing:-(.
> Thanks for your advice!
>
> Frank
>
> PS> dmesg information
>
>
> Linux version 2.6.10 (root@(protected)) (gcc version 3.2.2 20030222 (Red Hat
> Linux 3.2.2-5)) #1 SMP Thu May 5 22:14:28 CST 2005
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 127MB HIGHMEM available.
> 896MB LOWMEM available.
> On node 0 totalpages: 262128
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 225280 pages, LIFO batch:16
> HighMem zone: 32752 pages, LIFO batch:7
> DMI 2.2 present.
> ACPI: RSDP (v000 VIA694 ) @ 0x000f70a0
> ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
> ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
> ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
> Built 1 zonelists
> Kernel command line: ro root=/dev/hdb5 elevator=deadline
>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^the screen stop here!!
> Local APIC disabled by BIOS -- you can enable it with "lapic"
> mapped APIC to ffffd000 (0184d000)
> Initializing CPU#0
> CPU 0 irqstacks, hard=c05a6000 soft=c059e000
> PID hash table entries: 4096 (order: 12, 65536 bytes)
> Detected 1470.350 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 1033544k/1048512k available (3139k kernel code, 14392k reserved,
> 1305k data, 256k init, 131008k highmem)
> Checking if this processor honours the WP bit even in supervisor mode...
> Ok.
> Calibrating delay loop... 2891.77 BogoMIPS (lpj=1445888)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
> CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> ACPI: setting ELCR to 0200 (from 0e20)
> CPU0: AMD Athlon(tm) MP 1700+ stepping 02
> per-CPU timeslice cutoff: 731.14 usecs.
> task migration cache decay timeout: 1 msecs.
> SMP motherboard not detected.
> Local APIC not detected. Using dummy APIC emulation.
> Brought up 1 CPUs
> CPU0:
> domain 0: span 01
> groups: 01
> domain 1: span 01
> groups: 01
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20041105
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 13 devices
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> ** PCI interrupts are no longer routed automatically. If this
> ** causes a device to stop working, it is probably because the
> ** driver failed to call pci_enable_device(). As a temporary
> ** workaround, the "pci=routeirq" argument restores the old
> ** behavior. If this argument makes the device work again,
> ** please email the output of "lspci" to bjorn.helgaas@(protected)
> ** so I can fix the driver.
> Machine check exception polling timer started.
> audit: initializing netlink socket (disabled)
> audit(1115416001.691:0): initialized
> highmem bounce pool size: 64 pages
> Installing knfsd (copyright (C) 1996 okir@(protected)).
> mdacon: MDA with 8K of memory detected.
> Console: switching consoles 1-16 to mono MDA-2 (See http://MDA-2.ora-code.com) 80x25
> vga16fb: initializing
> vga16fb: mapped to 0xc00a0000
> fb0: VGA16 VGA frame buffer device
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> ACPI: Fan [FAN] (on)
> ACPI: Processor [CPU0] (supports C1 C2)
> ACPI: Processor [CPU0] (supports 2 throttling states)
> ACPI: Thermal Zone [THRM] (54 C)
> mdacon: MDA with 8K of memory detected.
> Console: switching consoles 1-16 to mono MDA-2 (See http://MDA-2.ora-code.com) 80x25
> lp: driver loaded but no devices found
> Linux agpgart interface v0.100 (c) Dave Jones
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
> lp0: using parport0 (interrupt-driven).
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 (See http://ost-1991.ora-code.com) 82077
> Ethernet Channel Bonding Driver: v2.6.1 (October 29, 2004)
> bonding: Warning: either miimon or arp_interval and arp_ip_target module
> parameters must be specified, otherwise bonding will not detect link
> failures! see bonding.txt for details.
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> PCI: setting IRQ 10 as level-triggered
> ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 0000:00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.19
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> hda: ST360021A, ATA DISK drive
> hdb: IBM-DPTA-372050 (See http://PTA-372050.ora-code.com), ATA DISK drive
> Probing IDE interface ide1...
> ide1: Wait for ready failed before probe !
> hdd: ATAPI-CD ROM-DRIVE-50 (See http://IVE-50.ora-code.com)MAX, ATAPI CD/DVD-ROM drive
> Probing IDE interface ide2...
> ide2: Wait for ready failed before probe !
> Probing IDE interface ide3...
> ide3: Wait for ready failed before probe !
> Probing IDE interface ide4...
> ide4: Wait for ready failed before probe !
> Probing IDE interface ide5...
> ide5: Wait for ready failed before probe !
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63
> hda: cache flushes not supported
> hda: hda1 hda2 < hda5 hda6 hda7 >
> hdb: max request size: 128KiB
> hdb: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63
> hdb: cache flushes not supported
> hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 >
> hdd: ATAPI 50X CD-ROM drive, 128kB Cache
> Uniform CD-ROM driver Revision: 3.20
> libata version 1.10 loaded.
> ieee1394: raw1394: /dev/raw1394 device initialized
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 10 (level, low) -> IRQ 10
> uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller
> uhci_hcd 0000:00:11.2: irq 10, io base 0xd800
> uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 10 (level, low) -> IRQ 10
> uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (#2)
> uhci_hcd 0000:00:11.3: irq 10, io base 0xdc00
> uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:11.4[D] -> GSI 10 (level, low) -> IRQ 10
> uhci_hcd 0000:00:11.4: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (#3)
> uhci_hcd 0000:00:11.4: irq 10, io base 0xe000
> uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard on isa0060/serio0
> input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
> md: raid0 personality registered as nr 2
> md: raid5 personality registered as nr 4
> raid5: automatically using best checksumming function: pIII_sse
> pIII_sse : 3980.000 MB/sec
> raid5: using function: pIII_sse (3980.000 MB/sec)
> md: multipath personality registered as nr 7
> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
> device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@(protected)
> Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
> PCI: setting IRQ 5 as level-triggered
> ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
> via82cxxx: Six channel audio available
> PCI: Setting latency timer of device 0000:00:11.5 to 64
> ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P)
> via82cxxx: board #1 at 0xE400, IRQ 5
> Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15
> 07:17:53 2004 UTC).
> can't register device seq
> ALSA device list:
> No soundcards found.
> oprofile: using timer interrupt.
> NET: Registered protocol family 2
> IP: routing cache hash table of 8192 buckets, 64Kbytes
> TCP: Hash tables configured (established 262144 bind 65536)
> ip_conntrack version 2.1 (8191 buckets, 65528 max) - 304 bytes per
> conntrack
> ip_tables: (C) 2000-2002 Netfilter core team
> ipt_recent v0.3.1: Stephen Frost <sfrost@(protected)>.
> http://snowman.net/projects/ipt_recent/
> arp_tables: (C) 2002 David S. Miller
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> ACPI wakeup devices:
> SLPB PCI0 USB0 USB1 USB2 UAR1 LPT1
> ACPI: (supports S0 S1 S4 S5)
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 256k freed
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hdb5, internal journal
> Adding 2040244k swap on /dev/hdb3. Priority:-1 extents:1
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hdb2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
>
--
Igor Nestorovi?
Home Page: http://jung.ekof.bg.ac.yu
ICQ UIN: 31079000
--
Shrike-list mailing list
Shrike-list@(protected)
https://www.redhat.com/mailman/listinfo/shrike-list
|
|
|