 | | | PXE/TFTP error | PXE/TFTP error 2005-07-11 - By Magee, Fred (MRC)
Back
Thanks, Kevin.
I had overlooked the fact I'd changed filename for node1 to
/tftpboot/linux-install/pxelinux.0". By xinetd.d/tftp file is the same
as yours and when I fixed dhcpd.conf it fixed the problem.
Have a great day.
-- --Original Message-- --
From: taroon-list-bounces@(protected)
[mailto:taroon-list-bounces@(protected)] On Behalf Of Kevin Jackson
Sent: Monday, July 11, 2005 9:02 AM
To: Discussion of Red Hat Enterprise Linux 3 (Taroon)
Subject: Re: PXE/TFTP error
How do you start the tftp server?
In my xinet.d tftp config I have set '-s /tftpboot' to the boot params.
I then specify the following in my dhcpd.conf
host somehost {
filename "pxelinux.0"
hardware ethernet 00:00:00:00:00:00;
fixed-address 123.123.123.123;
};
my filesystem looks like:
/tftpboot/
/tftpboot/pxelinux.cfg/
... and the pxeboot config files in here
/tftpboot/pxelinux.0
Kev
On 7/11/05, Magee, Fred (MRC) <fred.magee@(protected)> wrote:
>
>
>
> Good morning.
>
>
>
> I've just completed a clean install of RHEL3U4 ES on a cluster head
node,
> ran redhat-config-netboot, started tftp, dhcp and http, ran
> redhat-config-kickstart and still cannot pxe boot the cluster compute
nodes.
>
>
>
> The parameters I used for netboot are:
>
>
>
> Operating system identifier: rhel3u4ws
> Description: Red Hat EL3 U4 WS
> Select protocol for installation: HTTP
> Kickstart: /ks/ks.cfg
> Software:
> Server: 10.0.0.10
> Location: /ks
>
>
>
> This created /tftpboot as follows:
>
>
>
> /tftpboot/:
> total 4
> drwxr-xr-x 5 root root 4096 Jul 11 08:29 linux-install
>
> /tftpboot/linux-install:
> total 24
> drwxr-xr-x 2 root root 4096 Jul 7 16:42 msgs
> -rw-r--r-- 1 root root 11304 Jul 7 16:42 pxelinux.0
> drwxr-xr-x 2 root root 4096 Jul 8 14:46 pxelinux.cfg
> drwxr-xr-x 2 root root 4096 Jul 8 15:22 rhel3u4ws
>
> /tftpboot/linux-install/msgs:
> total 24
> -rw-r--r-- 1 root root 541 Jul 8 13:08 boot.msg
> -rw-r--r-- 1 root root 668 Sep 29 2004 expert.msg
> -rw-r--r-- 1 root root 871 Sep 29 2004 general.msg
> -rw-r--r-- 1 root root 860 Sep 29 2004 param.msg
> -rw-r--r-- 1 root root 530 Sep 29 2004 rescue.msg
> -rw-r--r-- 1 root root 545 Sep 29 2004 snake.msg
>
> /tftpboot/linux-install/pxelinux.cfg:
> total 8
> -rw-r--r-- 1 root root 326 Jul 8 13:08 default
> -rw-r--r-- 1 root root 252 Jul 8 13:08 pxeos.xml
>
> /tftpboot/linux-install/rhel3u4ws:
> total 3368
> -rw-r--r-- 1 root root 2538426 Jul 8 13:08 initrd.img
> lrwxrwxrwx 1 root root 15 Jul 8 14:49 ks.cfg ->
> /home/ks/ks.cfg
> -rw-r--r-- 1 root root 60 Jul 8 13:08 ks.cfg.orig
> lrwxrwxrwx 1 root root 13 Jul 8 15:21 pxelinux.0 ->
> ../pxelinux.0
> lrwxrwxrwx 1 root root 15 Jul 8 15:22 pxelinux.cfg
->
> ../pxelinux.cfg
> -rw-r--r-- 1 root root 895078 Jul 8 13:08 vmlinuz
>
>
> I've installed the kickstart images for RHEL 3U4 WS in /home/ks and
created
> a symbolic link as /var/www/html/ks pointing to /home/ks. When I ran
> kickstart config I saved the configuration file in /home/ks/ks.cfg and
made
> a link to it in /tftpboo/linux-install/rhel3u4ws. My
> dhcpd.conf file is:
>
>
>
> ddns-update-style interim;
> subnet 10.0.0.0 netmask 255.255.255.0 {
> option routers 10.0.0.10;
> option subnet-mask 255.255.255.0;
> option domain-name "test.cluster";
> range dynamic-bootp 10.0.0.2 10.0.0.9;
> default-lease-time 21600;
> max-lease-time 43200;
> }
>
> host mirkwood {
> hardware ethernet 00:0F:EA:3D:F4:A7;
> fixed-address 10.0.0.10;
> }
>
> group {
> # next-server mirkwood.test.cluster;
> next-server 10.0.0.10;
> host node1 {
> hardware ethernet 00:0F:EA:3D:F4:A8;
> fixed-address 10.0.0.1;
> filename "/tftpboot/linux-install/pxelinux.0";
> }
> host node2 {
> hardware ethernet 00:0F:EA:40:08:25;
> fixed-address 10.0.0.2;
> filename "pxelinux.0";
> }
> }
>
>
> I've tried defining mirkwood with and without the domainname and as
> 10.0.0.10 with and without the domainname. When I try to kickstart
the
> compute nodes I get the following error:
>
>
>
> PXE-T01: File not found
>
> PXE-E3B: TFTP Error - File not found
>
> PXE-M0F: Exiting PXEROM.
>
>
>
> A tcpdump of the exchange shows:
>
>
>
> 08:29:06.601436 0.0.0.0.bootpc > 255.255.255.255.bootps:
xid:0xeb3df4a8
> secs:4 flags:0x8000 file ""[|bootp]
> 08:29:06.601693 mirkwood.bootps > 255.255.255.255.bootpc:
xid:0xeb3df4a8
> secs:4 flags:0x8000 Y:10.0.0.1 S:mirkwood ether 0:f:ea:3d:f4:a8 file
> ""[|bootp] [tos 0x10]
> 08:29:08.614201 0.0.0.0.bootpc > 255.255.255.255.bootps:
xid:0xeb3df4a8
> secs:4 flags:0x8000 file ""[|bootp]
> 08:29:08.614460 mirkwood.bootps > 255.255.255.255.bootpc:
xid:0xeb3df4a8
> secs:4 flags:0x8000 Y:10.0.0.1 S:mirkwood ether 0:f:ea:3d:f4:a8 file
> ""[|bootp] [tos 0x10]
> 08:29:08.632968 arp who-has mirkwood tell 10.0.0.1
> 08:29:08.633004 arp reply mirkwood is-at 0:f:ea:3d:f4:a7
> 08:29:08.633110 10.0.0.1.2070 > mirkwood.tftp: 51 RRQ
> "/tftpboot/linux-install/pxelinux.0"
> 08:29:08.716249 mirkwood.32769 > 10.0.0.1.2070: udp 19 (DF)
> 08:29:08.720569 10.0.0.1.2071 > mirkwood.tftp: 56 RRQ
> "/tftpboot/linux-install/pxelinux.0"
> 08:29:08.721136 mirkwood.32769 > 10.0.0.1.2071: udp 19 (DF)
> 08:29:13.712023 arp who-has 10.0.0.1 tell mirkwood
> 08:29:14.712023 arp who-has 10.0.0.1 tell mirkwood
> 08:29:15.712023 arp who-has 10.0.0.1 tell mirkwood
>
>
>
>
> My question is what file is it telling me is missing. The only file
name I
> see in the tcpdump is pxelinux.0 which is clearly in
/tftpboot/linux-install
> but I never get the "snake" menu I expect to see as if it isn't
actually
> receiving pxelinux.0.
>
>
>
> Thanks for any assistance any of you can provide. I think I'm
overlooking
> something simple and obvious because I had this working prior to
> reinstalling.
>
> --
> Taroon-list mailing list
> Taroon-list@(protected)
> http://www.redhat.com/mailman/listinfo/taroon-list
>
>
--
Kevin Jackson
Red Hat Certified Engineer
www.uksysadmin.com
--
Taroon-list mailing list
Taroon-list@(protected)
http://www.redhat.com/mailman/listinfo/taroon-list
--
Taroon-list mailing list
Taroon-list@(protected)
http://www.redhat.com/mailman/listinfo/taroon-list
Earn $52 per hosting referral at Lunarpages.
|
|
|