 | | | Dialin with ISDN | Dialin with ISDN 2005-08-24 - By Mimmus
Back
You need to allow MSN in mgetty.conf for every line:
port ttyI0
init-chat "" \d\d\d+++\d\d\dATZ OK AT&Exxx&B512+FCLASS=8S14=10 OK
(where xxx is yopur phone number as you read in logs)
Bye
Domenico Viggiani
> -- --Original Message-- --
> From: taroon-list-bounces@(protected)
> [mailto:taroon-list-bounces@(protected)] On Behalf Of Nicole Haehnel
> Sent: Wednesday, August 24, 2005 11:17 AM
> To: taroon-list@(protected)
> Subject: Dialin with ISDN
>
> Hi,
>
> I'm trying to set up an isdn dialin server.
> But I get only:
>
> isdn_net: call from xxx -> 0 xxx ignored
> isdn_tty: call from xxx -> xxx ignored
>
> ifcfg-ippp0:
>
> ONBOOT=no
> USERCTL=yes
> PEERDNS=no
> TYPE=ISDN
> DEVICE=ippp0
> BOOTPROTO=dialup
> DEFROUTE=no
> PERSIST=off
> SECURE=off
> BUNDLING=off
> HUPTIMEOUT=600
> DIALMODE=manual
> ENCAP=syncppp
> USER=xxx
> PHONE_OUT=???
> AUTH='+pap -chap'
> PROVIDER=Arcor
> DEMAND=no
> MSN="mynumber"
> CALLBACK=off
> CCP=off
> PC=off
> AC=off
> BSDCOMP=off
> VJ=off
> VJCCOMP=off
>
> Do I need /etc/ppp/ioptions oder options.ippp0?
> And how can I authorize me?
> Can I use /etc/passwd or do I have to add a user in
> /etc/ppp/pap-secrets?
>
> Any ideas?
>
>
> log:
>
> Aug 23 14:51:37 GW kernel: ISDN subsystem Rev:
> 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded Aug 23
> 14:51:37 GW kernel: HiSax: Linux Driver for passive ISDN
> cards Aug 23 14:51:37 GW kernel: HiSax: Version 3.5 (module)
> Aug 23 14:51:37 GW kernel: HiSax: Layer1 Revision 1.1.4.1 Aug
> 23 14:51:37 GW kernel: HiSax: Layer2 Revision 1.1.4.1 Aug 23
> 14:51:37 GW kernel: HiSax: TeiMgr Revision 1.1.4.1 Aug 23
> 14:51:37 GW kernel: HiSax: Layer3 Revision 1.1.4.1 Aug 23
> 14:51:37 GW kernel: HiSax: LinkLayer Revision 1.1.4.1 Aug 23
> 14:51:37 GW kernel: HiSax: Approval certification failed
> because of Aug 23 14:51:37 GW kernel: HiSax: unauthorized
> source code changes Aug 23 14:51:37 GW kernel: HiSax: Card 1
> Protocol EDSS1 Id=HiSax (0) Aug 23 14:51:37 GW kernel: HiSax:
> AVM PCI driver Rev. 1.1.4.1 Aug 23 14:51:37 GW kernel:
> FritzPnP: no ISA PnP present Aug 23 14:51:37 GW kernel: AVM
> PCI: stat 0x3020a Aug 23 14:51:37 GW kernel: AVM PCI: Class A
> Rev 2 Aug 23 14:51:37 GW kernel: HiSax: AVM Fritz!PCI config
> irq:16 base:0xDCA0 Aug 23 14:51:37 GW kernel: AVM PCI: ISAC
> version (0): 2086/2186 V1.1 Aug 23 14:51:37 GW kernel: AVM
> Fritz PnP/PCI: IRQ 16 count 86560 Aug 23 14:51:38 GW kernel:
> AVM Fritz PnP/PCI: IRQ 16 count 86563 Aug 23 14:51:38 GW
> kernel: HiSax: DSS1 Rev. 1.1.4.1 Aug 23 14:51:38 GW kernel:
> HiSax: 2 channels added Aug 23 14:51:38 GW kernel: HiSax:
> MAX_WAITING_CALLS added Aug 23 14:51:38 GW isdn: ISDN-Module
> laden succeeded Aug 23 14:51:38 GW isdn: Starten von isdnlog
> succeeded Aug 23 14:51:38 GW isdn: Starting isdnlog succeeded
> Aug 23 14:51:49 GW kernel: isdn_net: call from xxx -> 0 xxx
> ignored Aug 23 14:51:49 GW kernel: isdn_tty: call from xxx ->
> xxx ignored Aug 23 14:51:53 GW kernel: isdn_net: call from
> xxx -> 0 xxx ignored Aug 23 14:51:53 GW kernel: isdn_tty:
> call from xxx -> xxx ignored
>
>
> Thanks!
>
> Nicole
>
> --
> Taroon-list mailing list
> Taroon-list@(protected)
> http://www.redhat.com/mailman/listinfo/taroon-list
>
--
Taroon-list mailing list
Taroon-list@(protected)
http://www.redhat.com/mailman/listinfo/taroon-list
Earn $52 per hosting referral at Lunarpages.
|
|
|