 | | | /dev/ttyUSB0 and PPP | /dev/ttyUSB0 and PPP 2006-03-02 - By Rick Stevens
Back
On Thu, 2006-03-02 at 22:31 +0000, Tony Dietrich wrote:
> Rick
>
> Should there be *two*
> Modem=
> lines in the config?
>
> > > >> [Modem0]
> > > >> MODEM = /dev/ttyUSB0
> > > >> Baud = 19200
> > > >> SetVolume = 0
> > > >> Dial Command = ATDT
> > > >> Init1 = ATZ
> > > >> Init3 = ATM0
> > > >> Modem = /dev/modem
> > > >> FlowControl = CRTSCTS
>
>
> Yeah I know Harold changed case on the first one, but still seems odd.
That is odd. The "wvdial.conf" file should have sections called
"[Dialer something]". "[Dialer Defaults]" contains the default
settings. "[Dialer Modem0]" would be used if you used "wvdial Modem0"
and any settings in that section will override the stuff in the "[Dialer
Defaults]" section.
In fact, that may be where the problem is. The thing should be:
[Dialer Defaults]
MODEM = /dev/ttyUSB0
Baud = 19200
Dial Command = ATDT
Init1 = ATZ
Init3 = ATM0
Phone1 = 555-5555
-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
- Rick Stevens, Senior Systems Engineer rstevens@(protected) -
- VitalStream, Inc. http://www.vitalstream.com -
- -
- "OK, so you're a Ph.D. Just don't TOUCH anything!" -
-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
__ ____ ____ ____ ____ ____ ____ ____ ____ ____
Redhat-install-list mailing list
Redhat-install-list@(protected)
https://www.redhat.com/mailman/listinfo/redhat-install-list
To Unsubscribe Go To ABOVE URL or send a message to:
redhat-install-list-request@(protected)
Subject: unsubscribe
|
|
|